RADIO measurements?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cdowns · 11-26-2009, 05:47 PM

does antbody offhand have the measurements for stem to stem width and the faceplate hole that they can post//been going thru old stuff and found a nice old panasononic AM/fm cassette i'd forgot i had and dont remember if it will fit the stock dash holes

red71c10 · 11-26-2009, 06:21 PM

I know I'm not answering your question (my nephew is borrowing my truck right now and I can't measure), but most stereo tape players will fit and the shafts on the player are probably adjustable.

68gmsee · 11-26-2009, 10:52 PM

I can get the measurement tomorrow for the opening off my 69. My 68 GMC has a temporary radio on it and face plage so can't get to the hole.

However, I do have an orginal radio here in the garage and here's the measurements:

Face part that slides in the hole is 4-7/16" W X 2-3/16" H.
Stem to stem is 6-1/4".

cdowns · 11-27-2009, 07:00 AM

thanks,i'll measure mine and see what i've got

my stems aren't adjustable for width.

11-26-2009, 05:47 PM	#1
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	RADIO measurements?? does antbody offhand have the measurements for stem to stem width and the faceplate hole that they can post//been going thru old stuff and found a nice old panasononic AM/fm cassette i'd forgot i had and dont remember if it will fit the stock dash holes __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 11-26-2009 at 05:48 PM.

11-26-2009, 06:21 PM	#2
red71c10 The Red Menace Join Date: Feb 2009 Location: Roseburg, OR Posts: 577	Re: RADIO measurements?? I know I'm not answering your question (my nephew is borrowing my truck right now and I can't measure), but most stereo tape players will fit and the shafts on the player are probably adjustable. __________________ 1971 Custom 10 - 350/350TH - Pwr steering, gauges, Chrome front bumper, Chrome hubcaps, Door edge guards, HD rear springs (current) 1968 C-20 Custom Camper - 350/350TH (orig 327), Pwr steering & brakes, gauges w/tach (former) 1968 C-20 - 307/3sp column (Dad's when I was a kid) "Driving is like coloring. Things get messy if you can't stay inside the lines."

11-26-2009, 10:52 PM	#3
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: RADIO measurements?? I can get the measurement tomorrow for the opening off my 69. My 68 GMC has a temporary radio on it and face plage so can't get to the hole. However, I do have an orginal radio here in the garage and here's the measurements: Face part that slides in the hole is 4-7/16" W X 2-3/16" H. Stem to stem is 6-1/4".

11-27-2009, 07:00 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: RADIO measurements?? thanks,i'll measure mine and see what i've got my stems aren't adjustable for width. __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.