MT WTB 71 Blazer PARTS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MontanaPete1 · 11-27-2009, 12:44 PM

1. I would like to Buy a the wheel set up for a 71 Blazer 4x4 (hub cap, B-ring). this is for a stock chrome 15" Wheel. If it wouldn't have come on a 71 from the factory, I don't want it. No matter the shape or condition, post a pic and I'll look at it.

2. RUBBER, Window-door-windshield- seals, bushings, NOS Better, open to anything.

3. Brown Dashboard cover

I will add stuff to this as I find it, trying to make this old Girl a daily driver.

**too much stuff** · 11-27-2009, 12:56 PM

If i understand you, you have chrome wheels and are looking for hubcaps? I assume the dogdish style? I don't think any beauty rings came on these rigs. There is also a full hubcap available for these.

MontanaPete1 · 11-27-2009, 01:13 PM

The wheels are the ones from the factory but some rust hides any bite marks fro any rings or such, if you have something that came on a stock 71 post a pic, and I'll try to remember what came on this one(it was my uncles before his death). I'll Post a photo of the wheels later today. thanks Pete

MontanaPete1 · 11-27-2009, 01:27 PM

These are the wheels

**bigdon-70blazer** · 11-27-2009, 05:19 PM

Those are not factory. Factory were not chrome. These could have been the ones but chromed later...

MontanaPete1 · 11-27-2009, 06:48 PM

Could this have been a dealer add-on? It also came with the CB Kit, which was a dealer add-on? All 5 rims are the same and where on there, when bought new. This was a show room model That my grandfather bought new for my uncle right off the floor. I will pull the specs off the glove box door if this will help.

olblue60@aol.com · 02-06-2010, 10:12 AM

You may want to contact member Special K . He is really knowlegable on these trucks, and has a steel wheel fetish. He could probably answer any Q's you may have. You will see him all over the board. Sorry about my spelling.

John

MontanaPete1 · 02-06-2010, 10:34 AM

Thanks John.

11-27-2009, 12:44 PM	#1
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	WTB 71 Blazer PARTS 1. I would like to Buy a the wheel set up for a 71 Blazer 4x4 (hub cap, B-ring). this is for a stock chrome 15" Wheel. If it wouldn't have come on a 71 from the factory, I don't want it. No matter the shape or condition, post a pic and I'll look at it. 2. RUBBER, Window-door-windshield- seals, bushings, NOS Better, open to anything. 3. Brown Dashboard cover I will add stuff to this as I find it, trying to make this old Girl a daily driver. __________________ "Drive it like you stole it!"

11-27-2009, 12:56 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: WTB 71 Blazer PARTS If i understand you, you have chrome wheels and are looking for hubcaps? I assume the dogdish style? I don't think any beauty rings came on these rigs. There is also a full hubcap available for these. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-27-2009, 01:13 PM	#3
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: WTB 71 Blazer PARTS The wheels are the ones from the factory but some rust hides any bite marks fro any rings or such, if you have something that came on a stock 71 post a pic, and I'll try to remember what came on this one(it was my uncles before his death). I'll Post a photo of the wheels later today. thanks Pete __________________ "Drive it like you stole it!"

11-27-2009, 01:27 PM	#4
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: WTB 71 Blazer PARTS These are the wheels __________________ "Drive it like you stole it!" Last edited by MontanaPete1; 11-27-2009 at 01:28 PM.

11-27-2009, 05:19 PM	#5
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: WTB 71 Blazer PARTS Those are not factory. Factory were not chrome. These could have been the ones but chromed later...

11-27-2009, 06:48 PM	#6
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: WTB 71 Blazer PARTS Could this have been a dealer add-on? It also came with the CB Kit, which was a dealer add-on? All 5 rims are the same and where on there, when bought new. This was a show room model That my grandfather bought new for my uncle right off the floor. I will pull the specs off the glove box door if this will help. __________________ "Drive it like you stole it!"

02-06-2010, 10:12 AM	#7
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: WTB 71 Blazer PARTS You may want to contact member Special K . He is really knowlegable on these trucks, and has a steel wheel fetish. He could probably answer any Q's you may have. You will see him all over the board. Sorry about my spelling. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

02-06-2010, 10:34 AM	#8
MontanaPete1 Registered User Join Date: Aug 2009 Location: Missoula, MT Posts: 47	Re: WTB 71 Blazer PARTS Thanks John. __________________ "Drive it like you stole it!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.