Repoped Stainless window trim quality - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy4Life** · 11-28-2009, 10:00 PM

Is the repoped stainless window trim worth buying or should I find nice originals to polish up?

Thanks,
Jay

Rack Man · 11-28-2009, 10:08 PM

I am not positive that the repops are actually stainless...I think they are just chrome? (I may be wrong though)

I used one of the repops for my back glass and it looks pretty nice...and fit quite well.....I was surprised!.....

I polished an original SS set for the front glass and it came out nice too.....The front & rear does not match each other though!

RM

Musclerodz · 11-28-2009, 10:09 PM

Looks great, fits like crap. Find some originals, plenty out there if you look

**Chevy4Life** · 11-28-2009, 10:24 PM

Exactly the info I was looking for. My front polished up nice, but the rear has a couple bad spots(on each piece). I only want to install these seals once.

Thanks guys!

mbgmike · 11-29-2009, 01:52 AM

The ones we sell are stainless steel. Don't have any problem with them fitting

Musclerodz · 11-29-2009, 03:06 AM

Front top piece curvature is wrong on the deep molding. Held the rubber seal off the cab. All the other pieces can be tweaked to work

**special-K** · 11-29-2009, 07:17 AM

The back glass is flat,so repro should work fine.

71 super · 11-29-2009, 07:47 PM

I used it on my 71 and had no trouble, also am going to use it on my 72 and don't forsee any problems. I agree if you can find nice original pieces get them but every set that I looked at were dinged or scratched beyond my intended use. Harold

72step · 11-29-2009, 08:49 PM

I have some original stainless trim for front and back I just took off a parts truck. It's in pretty decent shape. I made a ever so slight ding on the front taking it off. Make me an offer for front and back........

The rear has a couple minor dings towards the bottom but all in all it's very workable. I'd say they're in great condition for a 40 year old truck!

PM me or email me at matt-lisa@windstream.net

weircc · 11-29-2009, 10:00 PM

get it from chevy duty aka classic parts of america its made by precision its very nice

11-28-2009, 10:00 PM	#1
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Repoped Stainless window trim quality Is the repoped stainless window trim worth buying or should I find nice originals to polish up? Thanks, Jay

11-28-2009, 10:08 PM	#2
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: Repoped Stainless window trim quality I am not positive that the repops are actually stainless...I think they are just chrome? (I may be wrong though) I used one of the repops for my back glass and it looks pretty nice...and fit quite well.....I was surprised!..... I polished an original SS set for the front glass and it came out nice too.....The front & rear does not match each other though! RM __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288 Last edited by Rack Man; 11-28-2009 at 10:09 PM.

11-28-2009, 10:09 PM	#3
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Repoped Stainless window trim quality Looks great, fits like crap. Find some originals, plenty out there if you look __________________ Mike Redpath

11-28-2009, 10:24 PM	#4
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: Repoped Stainless window trim quality Exactly the info I was looking for. My front polished up nice, but the rear has a couple bad spots(on each piece). I only want to install these seals once. Thanks guys!

11-29-2009, 01:52 AM	#5
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Repoped Stainless window trim quality The ones we sell are stainless steel. Don't have any problem with them fitting

11-29-2009, 03:06 AM	#6
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Repoped Stainless window trim quality Front top piece curvature is wrong on the deep molding. Held the rubber seal off the cab. All the other pieces can be tweaked to work __________________ Mike Redpath

11-29-2009, 07:17 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Repoped Stainless window trim quality The back glass is flat,so repro should work fine. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-29-2009, 07:47 PM	#8
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Repoped Stainless window trim quality I used it on my 71 and had no trouble, also am going to use it on my 72 and don't forsee any problems. I agree if you can find nice original pieces get them but every set that I looked at were dinged or scratched beyond my intended use. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-29-2009, 08:49 PM	#9
72step Registered User Join Date: Nov 2000 Location: chimayo, nm, usa Posts: 898	Re: Repoped Stainless window trim quality I have some original stainless trim for front and back I just took off a parts truck. It's in pretty decent shape. I made a ever so slight ding on the front taking it off. Make me an offer for front and back........ The rear has a couple minor dings towards the bottom but all in all it's very workable. I'd say they're in great condition for a 40 year old truck! PM me or email me at matt-lisa@windstream.net

11-29-2009, 10:00 PM	#10
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Repoped Stainless window trim quality get it from chevy duty aka classic parts of america its made by precision its very nice



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.