Imperial Eastman Flarin tool - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968CHEVYC10 · 12-01-2009, 01:06 AM

I found this tool on ebay, Imperial Eastman Flaring tool, anybody ever used on of these? I Bought a cheapy flare tool and it broke within 45 min. so I'm looking for a little more quality this time, but still wanting to save some money.

http://cgi.ebay.com/ebaymotors/IMPER...motiveQ5fTools

*2tons of fun* · 12-01-2009, 02:13 AM

still has the same **** metal wing nuts that break off.

what failed on yours?

i have the napa autoparts version and swaped the wing nuts out for regular hex nuts and havent had a problem.

1968CHEVYC10 · 12-01-2009, 02:15 AM

the pin on the die that goes inside the line broke off, and the rest didn't seem to come together real good, rough cut and cheap metal.

cdowns · 12-01-2009, 06:51 AM

looks like the typical cheapo potmetal stuff// buybuying and paying for 2or three cheapo china tool sets costs a lot more than if you just go into a local tool place and spend the money for a quality piece of equipment that will last a lifetime

the bitterness of poor quality remains long after the sweetnees of low price is forgotten

68gmsee · 12-01-2009, 10:31 AM

Quote:

Originally Posted by cdowns

.............the bitterness of poor quality remains long after the sweetnees of low price is forgotten

Great saying, Cd... And very true. I'm sure this has happened to a lot of people. Me for sure.

*2tons of fun* · 12-03-2009, 01:01 AM

Quote:

Originally Posted by cdowns

looks like the typical cheapo potmetal stuff// buybuying and paying for 2or three cheapo china tool sets costs a lot more than if you just go into a local tool place and spend the money for a quality piece of equipment that will last a lifetime

the bitterness of poor quality remains long after the sweetnees of low price is forgotten

the sad part is, have you ever actually tried to buy a nice one? you cant. they are all peices of ****, some are $100 turds with warrenties and some are $20 turds that you dont worry about flushing because it was only $20.

mine is the napa brand also, i must have spent 2 days hunting them down at all the stores. i put the nuts on instead of the wing nuts because i couldnt get the thing tight enough to grip the tubing.

cdowns · 12-03-2009, 08:14 AM

Quote:

Originally Posted by 2tons of fun

the sad part is, have you ever actually tried to buy a nice one? you cant. they are all peices of ****, some are $100 turds with warrenties and some are $20 turds that you dont worry about flushing because it was only $20.

mine is the napa brand also, i must have spent 2 days hunting them down at all the stores. i put the nuts on instead of the wing nuts because i couldnt get the thing tight enough to grip the tubing.

honestly i haven't looked at buying a flairing tool in probally 40years ever since i bought this one i have no need to buy another

tcb-1 · 12-01-2009, 08:55 AM

^^ agree 100%

I've been using an SK double flare tool I bought at NAPA.......and believe me, I haven't been nice to it. granted it was pricey, but well worth it. (I have broken 2 cheapies in the past).

1968CHEVYC10 · 12-01-2009, 11:47 AM

basically what I wanted to know was whether this tool is a piece of junk or not?

68gmsee · 12-01-2009, 04:51 PM

Quote:

Originally Posted by 1968CHEVYC10

basically what I wanted to know was whether this tool is a piece of junk or not?

68gmsee · 12-01-2009, 04:56 PM

Sorry man, I guess you got your answer in a round about way. A complete set for $12 does sound like low quality considering a Snap On costs over $100.

I would find something somewhere around the middle or slightly higher.

**john** · 12-01-2009, 05:16 PM

I bought one of these sets in the sixties. Haven't broke it yet. I cant speak for modern production, but mine has been good fot 40 plus years. Mine is made in the good old USA not china.

1968CHEVYC10 · 12-01-2009, 06:09 PM

Quote:

Originally Posted by 68gmsee

Sorry man, I guess you got your answer in a round about way. A complete set for $12 does sound like low quality considering a Snap On costs over $100.

I would find something somewhere around the middle or slightly higher.

I looked up the set brand new and it was $66, so the the $12 might be kinda deceiving, and actually as of now I'm thinking about just doing the autozone loan-a-tool.

tcb-1 · 12-03-2009, 09:00 AM

^^ I am a fan of heavy duty tools. wow! that is a GREAT flaring tool! who is it produced by?

back to the original question, Imperial tools are good stuff. they produce the tubing cutter I have and it's very good quality. $12 bucks is a veeeeeery good price. I'd pick it up!

ERASER5 · 12-03-2009, 08:43 PM

Rigid Tools. Hands down. Nuff said.

Restrorob · 12-03-2009, 09:30 PM

^^^^^^^

dfwright · 12-28-2009, 11:09 AM

I am curious if you ended up doing the Autozone loan-a-tool, and if you were satisfied with the results?

1968CHEVYC10 · 12-28-2009, 04:44 PM

Quote:

Originally Posted by dfwright

I am curious if you ended up doing the Autozone loan-a-tool, and if you were satisfied with the results?

I tried the loan a tool deal at all the local parts stores (autozone, o'reilly's, advance) and they were all crap. so I went ahead and bought one from snap-on for $50 ands it worked great so far.

dfwright · 12-28-2009, 08:44 PM

Thanks, I'll be following in your footsteps soon, and I appreciate not having to go through that learning curve...

68C15 · 12-28-2009, 08:47 PM

I'm holding out for a hydraulic one made by Mastercool. I will have to either win the lottery or be a good boy for a whole year (like that'll happen). it is possibly the best flaring tool I have ever used. (old boss had one) I think they are about $300.

12-01-2009, 01:06 AM	#1
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Imperial Eastman Flarin tool I found this tool on ebay, Imperial Eastman Flaring tool, anybody ever used on of these? I Bought a cheapy flare tool and it broke within 45 min. so I'm looking for a little more quality this time, but still wanting to save some money. http://cgi.ebay.com/ebaymotors/IMPER...motiveQ5fTools __________________ '68 C10 LWB 6.2NA/NP833 3.73's Last edited by 1968CHEVYC10; 12-01-2009 at 01:34 AM.

12-01-2009, 02:13 AM	#2
2tons of fun Account Suspended Join Date: Jan 2009 Location: galt ca, Posts: 749	Re: Ebay auction ending soon! still has the same **** metal wing nuts that break off. what failed on yours? i have the napa autoparts version and swaped the wing nuts out for regular hex nuts and havent had a problem.

12-01-2009, 02:15 AM	#3
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Imperial Eastman Flarin tool the pin on the die that goes inside the line broke off, and the rest didn't seem to come together real good, rough cut and cheap metal. __________________ '68 C10 LWB 6.2NA/NP833 3.73's

12-01-2009, 06:51 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Imperial Eastman Flarin tool looks like the typical cheapo potmetal stuff// buybuying and paying for 2or three cheapo china tool sets costs a lot more than if you just go into a local tool place and spend the money for a quality piece of equipment that will last a lifetime the bitterness of poor quality remains long after the sweetnees of low price is forgotten __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-01-2009, 08:55 AM	#8
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Imperial Eastman Flarin tool ^^ agree 100% I've been using an SK double flare tool I bought at NAPA.......and believe me, I haven't been nice to it. granted it was pricey, but well worth it. (I have broken 2 cheapies in the past). __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

12-01-2009, 11:47 AM	#9
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Imperial Eastman Flarin tool basically what I wanted to know was whether this tool is a piece of junk or not? __________________ '68 C10 LWB 6.2NA/NP833 3.73's

12-01-2009, 04:56 PM	#11
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Imperial Eastman Flarin tool Sorry man, I guess you got your answer in a round about way. A complete set for $12 does sound like low quality considering a Snap On costs over $100. I would find something somewhere around the middle or slightly higher.

12-01-2009, 05:16 PM	#12
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Imperial Eastman Flarin tool I bought one of these sets in the sixties. Haven't broke it yet. I cant speak for modern production, but mine has been good fot 40 plus years. Mine is made in the good old USA not china. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 12-01-2009 at 05:18 PM.

12-03-2009, 09:00 AM	#14
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Imperial Eastman Flarin tool ^^ I am a fan of heavy duty tools. wow! that is a GREAT flaring tool! who is it produced by? back to the original question, Imperial tools are good stuff. they produce the tubing cutter I have and it's very good quality. $12 bucks is a veeeeeery good price. I'd pick it up! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

12-03-2009, 08:43 PM	#15
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Imperial Eastman Flarin tool Rigid Tools. Hands down. Nuff said. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

12-03-2009, 09:30 PM	#16
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Imperial Eastman Flarin tool ^^^^^^^ __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

12-28-2009, 11:09 AM	#17
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Imperial Eastman Flarin tool I am curious if you ended up doing the Autozone loan-a-tool, and if you were satisfied with the results? __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

12-28-2009, 08:44 PM	#19
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Imperial Eastman Flarin tool Thanks, I'll be following in your footsteps soon, and I appreciate not having to go through that learning curve... __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

12-28-2009, 08:47 PM	#20
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Imperial Eastman Flarin tool I'm holding out for a hydraulic one made by Mastercool. I will have to either win the lottery or be a good boy for a whole year (like that'll happen). it is possibly the best flaring tool I have ever used. (old boss had one) I think they are about $300.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.