Yes another soft top thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jaybird2 · 12-01-2009, 02:55 PM

Actually this worked out pretty well. I had an old Kayline soft top from a previous Blazer, but no hardware. I contacted the guys in Colorado that are making soft tops for our Blazers and they were willing to sell me just the hardware kit. I knew it would take some adjustments but I was willing to make it work. As you can see there is still some work to be done. But I'm pretty happy with how it's going so far. Whata ya guys think?

Sacramento70 · 12-01-2009, 03:53 PM

is that a baja top. lookin good

**Yukon Jack** · 12-01-2009, 07:46 PM

Pretty cool that they were willing to do that for you - speaks well of the company.

Big J · 12-01-2009, 08:14 PM

Looks good. So whats the company info.? name, website, etc.

Firebirdjones · 12-02-2009, 10:31 AM

Quote:

Originally Posted by Big J

Looks good. So whats the company info.? name, website, etc.

I'll second that. Would like to have a soft top laying around if I ever get the gumption to remove that hardtop

tallhoedude · 12-02-2009, 12:55 PM

how much for just the hardware kit??

scoyote · 12-02-2009, 10:12 PM

the company is located in Boulder, CO (we won't hold that against them)

Website is: http://www.softopper.com/

I'm getting mine there too....very nice product.

clos69 · 12-03-2009, 04:36 PM

Jay, did you happen to get the instruction sheets with the new kit? I would like to fab one up...if you do.... can you scan and email them to me,thanks Carlos

Jaybird2 · 12-03-2009, 06:41 PM

No problem, the instructions are a little vague but I'll send you everything I have.

scoyote · 12-03-2009, 08:00 PM

Softopper actually makes a piece of hardware that screws to the windshield with 4 screws and that piece holds all of the snaps.

So, you only need to drill 4 holes instead of a couple dozen.

No matter what....some holes need to be drilled to hold the front down.

So far that has been the best option available that I have found.

Lots of ideas out there....but no practical solutions actually manufactured except this one.

That I'm aware of anyway.

12-01-2009, 02:55 PM	#1
Jaybird2 Registered User Join Date: Apr 2008 Location: Tucson, AZ Posts: 59	Yes another soft top thread Actually this worked out pretty well. I had an old Kayline soft top from a previous Blazer, but no hardware. I contacted the guys in Colorado that are making soft tops for our Blazers and they were willing to sell me just the hardware kit. I knew it would take some adjustments but I was willing to make it work. As you can see there is still some work to be done. But I'm pretty happy with how it's going so far. Whata ya guys think? Attached Images __________________

12-01-2009, 03:53 PM	#2
Sacramento70 Blazer Fanatic Join Date: May 2009 Location: Sacramento, ca Posts: 249	Re: Yes another soft top thread is that a baja top. lookin good __________________ 1970 Chevy blazer

12-01-2009, 07:46 PM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Yes another soft top thread Pretty cool that they were willing to do that for you - speaks well of the company. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

12-01-2009, 08:14 PM	#4
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: Yes another soft top thread Looks good. So whats the company info.? name, website, etc. __________________ BAZINGA! My Build

12-02-2009, 12:55 PM	#6
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Yes another soft top thread how much for just the hardware kit?? __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

12-02-2009, 10:12 PM	#7
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: Yes another soft top thread the company is located in Boulder, CO (we won't hold that against them) Website is: http://www.softopper.com/ I'm getting mine there too....very nice product. __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

12-03-2009, 04:36 PM	#8
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Yes another soft top thread Jay, did you happen to get the instruction sheets with the new kit? I would like to fab one up...if you do.... can you scan and email them to me,thanks Carlos __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

12-03-2009, 06:41 PM	#9
Jaybird2 Registered User Join Date: Apr 2008 Location: Tucson, AZ Posts: 59	Re: Yes another soft top thread No problem, the instructions are a little vague but I'll send you everything I have. __________________

12-03-2009, 08:00 PM	#10
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: Yes another soft top thread Softopper actually makes a piece of hardware that screws to the windshield with 4 screws and that piece holds all of the snaps. So, you only need to drill 4 holes instead of a couple dozen. No matter what....some holes need to be drilled to hold the front down. So far that has been the best option available that I have found. Lots of ideas out there....but no practical solutions actually manufactured except this one. That I'm aware of anyway. __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.