Billet Aluminum Dash Panels and Glove Box Doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan Hubbard · 12-03-2009, 01:15 PM

I currently have 14 Dash Panels that are setup for Auto Meter 5" gauges and 14 Glove Box Doors. I usually sold these for $450.00 for the two but I am running an end of the year special for $350.00 for the set and that includes ground shipping. If you live in CA, I will have to add sales tax. I will accept payment at my paypal address of ryan.hubbard@aspencontrols.com. I have attached picturse below. Once these 14 are gone the deal is over for now.

cparman · 12-03-2009, 06:23 PM

could you post a picture of one of the gauge sets finished with gauges in it?

Ryan Hubbard · 12-03-2009, 07:33 PM

Here is a picture someone posted on the other thread. My dash has VDO gauges.

Ryan Hubbard · 12-03-2009, 07:45 PM

Here is my dash with the VDO Gauges

Last_Paladin · 03-23-2012, 10:19 PM

Quote:

Originally Posted by Ryan Hubbard

Here is a picture someone posted on the other thread. My dash has VDO gauges.

What LEDs are you using?

Ryan Hubbard · 03-27-2012, 12:41 AM

Quote:

Originally Posted by Last_Paladin

What LEDs are you using?

Here is the Painless Wiring LED I used

5/16" LED Indicating light part number 80205 for green, 80204 for red, 80206 for blue and 80203 for Amber

chevyratracer · 08-04-2012, 10:46 PM

Are you still selling these?

DjS71 · 12-03-2009, 09:17 PM

I'm interested, I'll have to run it past those bastards who want my money for electricity and Christmas presents.

EDIT: What size are the smaller gauge holes?

Ryan Hubbard · 12-03-2009, 11:15 PM

2 1/16"

AJs72K5 · 12-04-2009, 07:08 PM

Dang, those are nice. How much for just the driver side?

Ground Pounder · 12-05-2009, 11:32 AM

What kind of finish do they have hard to tell from pics. Thanks

northern 85 · 12-06-2009, 09:04 AM

Can the center be painted black and the outside edge be polished?

Ryan Hubbard · 12-06-2009, 05:12 PM

Quote:

Originally Posted by northern 85

Can the center be painted black and the outside edge be polished?

That is what I did with my dash panel. They are made out 6061 aluminum and polish up real nice.

Ryan Hubbard · 12-06-2009, 07:48 PM

Quote:

Originally Posted by Ground Pounder

What kind of finish do they have hard to tell from pics. Thanks

The finish is just a bare aluminum that has been bead blasted to remove the tooling marks.

Ryan Hubbard · 12-06-2009, 10:04 PM

Quote:

Originally Posted by ajs72k5

dang, those are nice. How much for just the driver side?

$225.00

**Thealien** · 12-06-2009, 10:28 AM

Nice, im over $1000 over budget on my truck now. I'll see what I can do

VA72C10 · 12-06-2009, 08:06 PM

Here you go!

(Can I get a discount

)

Beautiful product!

Ground Pounder · 12-06-2009, 09:42 PM

I'm in money sent

Ground Pounder · 12-06-2009, 10:38 PM

Could you do a ashtray door & radio delete or billet knobs ?

**Hart_Rod** · 12-08-2009, 08:58 PM

I need one that has a 3 3/8 center hole and 2 5/8 small holes. Are you still custom making them?

Ryan Hubbard · 12-08-2009, 10:39 PM

Quote:

Originally Posted by Hart_Rod

I need one that has a 3 3/8 center hole and 2 5/8 small holes. Are you still custom making them?

I have three available like that I can do the same deal on.

**Hart_Rod** · 12-09-2009, 12:06 AM

Quote:

Originally Posted by Ryan Hubbard

I have three available like that I can do the same deal on.

I'm very interested. Please post some pictures when you can.

Ryan Hubbard · 12-09-2009, 10:17 AM

Quote:

Originally Posted by Hart_Rod

I'm very interested. Please post some pictures when you can.

It will take me a couple of days because I am on the road for business. I should be back by the weekend.

darkhorse970 · 12-09-2009, 09:16 PM

I'm also interested in one like Hart_Rod is requesting. I would like to see the pics as well.

Ryan Hubbard · 12-10-2009, 01:09 PM

Here is the dash panel with the 3 3/8 opening in middle. These still have all the machining marks on them.

12-03-2009, 01:15 PM	#1
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Billet Aluminum Dash Panels and Glove Box Doors I currently have 14 Dash Panels that are setup for Auto Meter 5" gauges and 14 Glove Box Doors. I usually sold these for $450.00 for the two but I am running an end of the year special for $350.00 for the set and that includes ground shipping. If you live in CA, I will have to add sales tax. I will accept payment at my paypal address of ryan.hubbard@aspencontrols.com. I have attached picturse below. Once these 14 are gone the deal is over for now. Attached Images

12-03-2009, 06:23 PM	#2
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: Billet Aluminum Dash Panels and Glove Box Doors could you post a picture of one of the gauge sets finished with gauges in it?

12-03-2009, 07:33 PM	#3
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors Here is a picture someone posted on the other thread. My dash has VDO gauges. Attached Images

12-03-2009, 07:45 PM	#4
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors Here is my dash with the VDO Gauges Attached Images

08-04-2012, 10:46 PM	#7
chevyratracer Registered User Join Date: May 2012 Location: Bakersfield, CA Posts: 2	Re: Billet Aluminum Dash Panels and Glove Box Doors Are you still selling these?

12-03-2009, 09:17 PM	#8
DjS71 Registered User Join Date: Feb 2009 Location: Santa Rosa, CA Posts: 267	Re: Billet Aluminum Dash Panels and Glove Box Doors I'm interested, I'll have to run it past those bastards who want my money for electricity and Christmas presents. EDIT: What size are the smaller gauge holes? __________________ 1971 C10 Short/Fleet 307-2BBL/3OTT 1999 Silverado 2500 ECSB 6.0/4L80 Last edited by DjS71; 12-03-2009 at 09:48 PM.

12-03-2009, 11:15 PM	#9
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors 2 1/16"

12-04-2009, 07:08 PM	#10
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Billet Aluminum Dash Panels and Glove Box Doors Dang, those are nice. How much for just the driver side? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

12-05-2009, 11:32 AM	#11
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: Billet Aluminum Dash Panels and Glove Box Doors What kind of finish do they have hard to tell from pics. Thanks

12-06-2009, 09:04 AM	#12
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Billet Aluminum Dash Panels and Glove Box Doors Can the center be painted black and the outside edge be polished?

12-06-2009, 10:28 AM	#16
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Billet Aluminum Dash Panels and Glove Box Doors Nice, im over $1000 over budget on my truck now. I'll see what I can do

12-06-2009, 08:06 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Billet Aluminum Dash Panels and Glove Box Doors Here you go! (Can I get a discount ) Beautiful product! __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 12-06-2009 at 08:07 PM.

12-06-2009, 09:42 PM	#18
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: Billet Aluminum Dash Panels and Glove Box Doors I'm in money sent

12-06-2009, 10:38 PM	#19
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: Billet Aluminum Dash Panels and Glove Box Doors Could you do a ashtray door & radio delete or billet knobs ?

12-08-2009, 08:58 PM	#20
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Billet Aluminum Dash Panels and Glove Box Doors I need one that has a 3 3/8 center hole and 2 5/8 small holes. Are you still custom making them? Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-08-2009 at 08:59 PM.



Register or Log In To remove these advertisements.

12-09-2009, 09:16 PM	#24
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Billet Aluminum Dash Panels and Glove Box Doors I'm also interested in one like Hart_Rod is requesting. I would like to see the pics as well. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

12-10-2009, 01:09 PM	#25
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors Here is the dash panel with the 3 3/8 opening in middle. These still have all the machining marks on them. Attached Images

Register or Log In To remove these advertisements.