ND WTB: '72 Accelerator/throttle cable bracket for 350 4bbl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

badpeanut · 12-20-2009, 01:12 AM

I'm rebuilding a '72 4bbl for my 4x4 Blazer (350/TH350) and need the accelerator/throttle cable bracket like shown in the attached picture. I could also use the accelerator/throttle cable stud and kickdown cable stud as shown in the second attached picture.

badpeanut · 12-20-2009, 08:05 PM

I found a accelerator/throttle cable bracket, but still need the studs pictured above.

I also need the clip that attaches the choke linkage rod to the carb.

12-20-2009, 01:12 AM	#1
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	WTB: '72 Accelerator/throttle cable bracket for 350 4bbl I'm rebuilding a '72 4bbl for my 4x4 Blazer (350/TH350) and need the accelerator/throttle cable bracket like shown in the attached picture. I could also use the accelerator/throttle cable stud and kickdown cable stud as shown in the second attached picture. Attached Images __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

12-20-2009, 08:05 PM	#2
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: WTB: '72 Accelerator/throttle cable bracket for 350 4bbl I found a accelerator/throttle cable bracket, but still need the studs pictured above. I also need the clip that attaches the choke linkage rod to the carb. __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.