Factory Tow Hooks

[Mr. Fong]

Does anyone know which tow hooks go on a '66 K-10 as well as how they are mounted? Anyone factory drawings or photos would be appreciated.

Thank you.

[LILRED66]

Here is one on a '66 Chevy K10.

[Mr. Fong]

Thank you for the photo. I am curious, did you add these to the truck or were they on the truck at time of purchase? The reason I ask is that they have more of a post-1972 look to them. All of the earlier hooks I have seen are thicker by the bolt holes and would not sit flush with the frame. I have attached some photos I ran across some time back showing the hooks from the '67-'72 era to help illustrate; I have yet to see anything for '60-'66. The difference over these years seems to be how the hook is curved. None of the factory books actually show which hook or where or how it is mounted on a 1966 model. The factory used a metallic blue big window base model K20 with a camper in some photos that had tow hooks but none of them actually show the hooks in detail. Also, I have seen hooks similar to the '67-'68 on '60-'66 trucks but each truck had them mounted in a different fashion (see attached). The impression I got from the trucks I had seen was that the hooks were added over the years by someone other than the dealer or factory.

Again, thank you for the photo. I checked out your link and you have quite the collection. To call it amazing is an understatement.

[too much stuff]

The pic with all the hooks is part of my collection. The first hook is 60-68. I know someone had a decent pic on the 67-72 side of the 68 hooks mounted, but i can't remember who...

[Mr. Fong]

Here is the '65 K20 photo I referenced.

[Mr. Fong]

Thank you for the information and thank you for identifying your photos. It is nice collection and reference tool.

Thanks again.

[jonzcustomshop]

a couple months late, but here are the ones on my 64 c10 for some reference pics

[1963c-10]

Originally Posted by jonzcustomshop

a couple months late, but here are the ones on my 64 c10 for some reference pics

In these pics, they sit far more forward than the pics I have.

[64bigblock]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[Mr. Fong]

Thank you for posting the photos. They are very helpful.

Incidentally, am I missing something here? Who posted anything for sale? This discussion is regarding identifying the right hooks and their location, not the sale of a set of hooks.

[63 & 64 Bowties]

Originally Posted by Mr. Fong

Incidentally, am I missing something here?

yes, you missed the comments made in the previous post because they were edited out and replaced with the "red" text to inform the poster of a violation.

[factorystock]

Great photo of the c 20 4x4 with period wide base black rims. I bet larger trucks used the same style hook, but mounted on top of bumper. This is the best shot I could find.

[aerotruk63]

The larger trucks had different front hooks. They mount flat to the top of the frame. Dam now I have to find a pair of rear tow hooks. Ref. 1964 GMC Accessories.



Ref. 1960 GMC Accessories. Interesting how they state front and rear tow hooks using the same picture. Maybe there's just a hardware difference! Need a picture of a big 1960 to see if they match

[aerotruk63]

Rear tow hooks. http://www.clevelandhardware.com/. Sent them an email, we'll see if they respond.

[jonzcustomshop]

rear ones would be nice, would make more sense than the front.
Only good reason i could come up with for the front mount, is that the reverse gear is lower than the granny first, so = more power to pull?

[factorystock]

Chevy option number is V76 for the hooks, and it is the same option number for pickups and larger series trucks. I believe the hooks shown on the dump truck I posted are the same used on pickups, just mounted upside down. GMC used different vendors were it came to some accessories. The ones on the Chevy definately have a twist and curve to them, while the GMC shown look straight.

[Joemomma1]

I just found these

[aerotruk63]

Originally Posted by factorystock

Chevy option number is V76 for the hooks, and it is the same option number for pickups and larger series trucks. I believe the hooks shown on the dump truck I posted are the same used on pickups, just mounted upside down. GMC used different vendors were it came to some accessories. The ones on the Chevy definately have a twist and curve to them, while the GMC shown look straight.

Had hooks like that on my firetruck that I just sold. I got a reply from : http://www.clevelandhardware.com/ they gave me the number of a local supplier. They sell the 2801-C RH & LH. they also sell 2801-A which match the large truck hooks.

[aerotruk63]

Getting closer




http://www.allegiscorp.com/DisplayPa....jsp&cat=Hooks

[aerotruk63]

The company is Stateside but have a branch here.

[1963c-10]

Can anybody show me the correct location for the front factory tow hooks? Are these pictures correct? The 1st pic is what I have. The next 3 are where I believe they locate, and the 5th pic is a rear hook I have. Looking for 1 more still, but they are tough to find.

[aerotruk63]

Interesting how on the 4x4 their reversed as to the 2WD installation. I have no documentation as to their installation.

[1963c-10]

Yeah, I couldn't find any either. I have found reference to them, but no install documentation. Guess it'll come down to a matter of preference? I dont think that a few inches in or out of the frame will make much of a difference as long as they are bolted to the frame. Im hoping that some more people will chime in here on it.

[1963c-10]

Picked up a set of rear tow hooks. Been looking for awhile, hard to find.

[1963c-10]

I have finally found some time to work on the truck again. Priorities are probably out of order, but have been moving alot of logs around on property so I want to get the hooks on. Here are some pics of the front hooks and the measurements. They are alot larger than most people realize. Part # 3663349-50 . Bolts are 3/4" and will be using grade 8 hardware. These list as 1960-68 c-10 / c-30 except DD and 4x4.