Hey I'm new here..my k20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JordanK20 · 12-28-2009, 06:38 PM

Hello I'm new member, my is name Jordan. I bought my 86 K20 few months ago but I wanted it(exact truck) since I was 10yrs old and I'm 26 now ha so its dream come true.

Has rebuilt 350 5.7L engine and new remanufactured transmission before I bought it.
New stock style dual exhaust I wanna swap out with flowmasters but there new.
Sitting on 35x12.5x16.5 all terrains. It must have Skyjacker suspenion because theres a sticker in cab about it. I'm not sure what inch lift? any Ideas?

So far I've had to replace the fuel pump and fix fuel lines and new rear shoes.
Next I need to replace all 7 shocks. I'll need ball joints and tierods too soon.

Its great in the snow I was at a christmas party last week and when I left at 1am my truck was buried. I turned the hubs droped it into 4low and crawled out of hole I was stuck in. I was the only one able to go home. Unplowed streets not a problem.

haha

My 4wd low works but cant seem to get 4wd high to stay. I hope the transfer case is okay. I'll get that checked out soon too.

It has dual tanks but the passeger side was disconnected before I bought it. I dont know whats deal with the cap, I wish it wasnt exposed.

My other plans are to install driving lights, loud air horn, remove tint, new steering wheel, new armrest, and cleaning it up alot. Repainting grill/headlight bezels...new tail lights. Im going to remove the diamond plate steps soon as spring gets here.

Anyway I hope you guys like my truck, I'll be on here commenting and sharing. I will probably have million questions to ask ha.

Anadrol · 12-28-2009, 06:53 PM

Welcome to the site.
You've got a killer truck already, and it sounds like you've got the fever, which means that puppy is gonna get MODDED!!

You came to the right place. In your journey with this truck, you will use a lot of Google searches, and I guarantee, about 60% of those searches will bring you right back to this forum!

Ask away. This is the place for it.

Scootin 81 C20 · 12-28-2009, 06:55 PM

Welcome to the board.

You have a great looking truck and by what you've said, it sounds like it is a nearly bullet proof truck. Looking forward to more.

Slick17 · 12-28-2009, 07:29 PM

Great looking truck man.

scotto0609 · 12-28-2009, 09:41 PM

nice truck

**old Rusty C10** · 12-28-2009, 10:22 PM

Welcome aboard Neighbor! im just down 495 in Brooklyn.
I love your truck someday my 82 will look as nice
If you need an honest guy to look at the transfer case i know someone in Elmont

JohnC · 12-28-2009, 10:30 PM

Welcome to the boards! That is one sweet truck you have. It has a great stance! Like stated before you won't find more info, and more helpful people than here. I'm looking forward to seeing what more you do to it.

74 C-30 · 12-29-2009, 12:11 AM

nice truck! looks like my buddies truck, just nicer

DBLSPRT68 · 12-29-2009, 05:25 AM

Great looking truck!!! I wish mine was a K20 instead of a C20! The tank question: either the bedside was replaced with the older exposed cap side, or it's an aftermarket second tank add on. Both sides should have the gas door. More than likely the transfer valve went bad, and the owner just bypassed it to run one tank. Just crawl up under there and see what's there/not there; and go from there. Get a LMC truck catalog, it has exploded view pictures of everything.

motornut · 12-29-2009, 08:17 AM

nice truck

mitch1965 · 12-29-2009, 12:46 PM

Welcome to the board. Nice truck, I'm sure many of us are jealous, including me. Feel free to ask for advice, help, etc. We are all truck junkies!

68 TT · 12-29-2009, 03:27 PM

Nice looking truck. Welcome to the board.

I had 35's on my 81 K20 and it took a 6" lift to clear them. Looked about like what you have so I would guess that is what you have too.

Chief Bail · 12-29-2009, 08:50 PM

Jordan im new also lil brother. Real nice truck my man. REAL NYCE..... And WELCOME this is a cool azz forum. And the brothers and 1 sister that I met are real kool.

sharpmotors · 12-29-2009, 09:26 PM

awesome lookin rig you got,i lso got bit recently and bought a 85 k20

3r!c84 · 12-29-2009, 11:28 PM

nice truckk paint that back bumper black tooo (: black on,black on, black

**78 Big10 454** · 12-29-2009, 11:54 PM

Jordan, welcome from sunny SoCal! Impressive ride, my friend. If you have a question, someone on this Board will have the right answer.

JordanK20 · 12-30-2009, 10:42 PM

Thanks alot guys...I can tell this forum has alot nice people willing to help and share. Nice to meet you all.

Thanks "68 TT" I wasnt sure if I had a 4 inch lift but possibly a 6 inch lift wow thats awesome.

yeah "3r!c84" I will either get new rear bumper or just paint it black.

I was thinking about getting new tails with crome trim because there faded one has a crack.

I think the LMC company is the best I've spent hours already looking over that catalog lol and I bought a Haynes manual.

I also have a aluminum cap that needs to be repainted black. I was thinking about painting it camo for fun. I'll just use it summer going to beach and camping.

Here pic of my jetta and truck

12-28-2009, 06:38 PM	#1
JordanK20 Registered User Join Date: Dec 2009 Location: Long Island NY Posts: 14	Hey I'm new here..my k20 Hello I'm new member, my is name Jordan. I bought my 86 K20 few months ago but I wanted it(exact truck) since I was 10yrs old and I'm 26 now ha so its dream come true. Has rebuilt 350 5.7L engine and new remanufactured transmission before I bought it. New stock style dual exhaust I wanna swap out with flowmasters but there new. Sitting on 35x12.5x16.5 all terrains. It must have Skyjacker suspenion because theres a sticker in cab about it. I'm not sure what inch lift? any Ideas? So far I've had to replace the fuel pump and fix fuel lines and new rear shoes. Next I need to replace all 7 shocks. I'll need ball joints and tierods too soon. Its great in the snow I was at a christmas party last week and when I left at 1am my truck was buried. I turned the hubs droped it into 4low and crawled out of hole I was stuck in. I was the only one able to go home. Unplowed streets not a problem. haha My 4wd low works but cant seem to get 4wd high to stay. I hope the transfer case is okay. I'll get that checked out soon too. It has dual tanks but the passeger side was disconnected before I bought it. I dont know whats deal with the cap, I wish it wasnt exposed. My other plans are to install driving lights, loud air horn, remove tint, new steering wheel, new armrest, and cleaning it up alot. Repainting grill/headlight bezels...new tail lights. Im going to remove the diamond plate steps soon as spring gets here. Anyway I hope you guys like my truck, I'll be on here commenting and sharing. I will probably have million questions to ask ha.

12-28-2009, 06:53 PM	#2
Anadrol Registered User Join Date: Nov 2009 Location: Indy Posts: 151	Re: Hey I'm new here..my k20 Welcome to the site. You've got a killer truck already, and it sounds like you've got the fever, which means that puppy is gonna get MODDED!! You came to the right place. In your journey with this truck, you will use a lot of Google searches, and I guarantee, about 60% of those searches will bring you right back to this forum! Ask away. This is the place for it.

12-28-2009, 06:55 PM	#3
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Hey I'm new here..my k20 Welcome to the board. You have a great looking truck and by what you've said, it sounds like it is a nearly bullet proof truck. Looking forward to more. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-28-2009, 07:29 PM	#4
Slick17 Registered User Join Date: Nov 2009 Location: Frederick, MD Posts: 158	Re: Hey I'm new here..my k20 Great looking truck man.

12-28-2009, 09:41 PM	#5
scotto0609 Junior Member Join Date: Nov 2005 Location: new york Posts: 226	Re: Hey I'm new here..my k20 nice truck

12-28-2009, 10:22 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Hey I'm new here..my k20 Welcome aboard Neighbor! im just down 495 in Brooklyn. I love your truck someday my 82 will look as nice If you need an honest guy to look at the transfer case i know someone in Elmont __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-28-2009, 10:30 PM	#7
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Hey I'm new here..my k20 Welcome to the boards! That is one sweet truck you have. It has a great stance! Like stated before you won't find more info, and more helpful people than here. I'm looking forward to seeing what more you do to it.

12-29-2009, 12:11 AM	#8
74 C-30 Dually Pride Join Date: Jun 2008 Location: NH Posts: 540	Re: Hey I'm new here..my k20 nice truck! looks like my buddies truck, just nicer __________________ If I have to explain, you wouldn't understand. '74 Chevy C-30 350/4 speed/dually '94 Ford Ranger

12-29-2009, 05:25 AM	#9
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Hey I'm new here..my k20 Great looking truck!!! I wish mine was a K20 instead of a C20! The tank question: either the bedside was replaced with the older exposed cap side, or it's an aftermarket second tank add on. Both sides should have the gas door. More than likely the transfer valve went bad, and the owner just bypassed it to run one tank. Just crawl up under there and see what's there/not there; and go from there. Get a LMC truck catalog, it has exploded view pictures of everything. __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

12-29-2009, 08:17 AM	#10
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Hey I'm new here..my k20 nice truck __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

12-29-2009, 12:46 PM	#11
mitch1965 Registered User Join Date: Oct 2004 Location: Fort Collins, Colorado Posts: 376	Re: Hey I'm new here..my k20 Welcome to the board. Nice truck, I'm sure many of us are jealous, including me. Feel free to ask for advice, help, etc. We are all truck junkies! __________________ '99 K1500 Tahoe, 2dr, barn doors - 350/ 4L60E, 3.73 '01 K2500HD Silverado Ext Cab - 496/ Allison, 4.10

12-29-2009, 03:27 PM	#12
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: Hey I'm new here..my k20 Nice looking truck. Welcome to the board. I had 35's on my 81 K20 and it took a 6" lift to clear them. Looked about like what you have so I would guess that is what you have too. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

12-29-2009, 08:50 PM	#13
Chief Bail Registered User Join Date: Jun 2009 Location: winston-salem n.c. Posts: 475	Re: Hey I'm new here..my k20 Jordan im new also lil brother. Real nice truck my man. REAL NYCE..... And WELCOME this is a cool azz forum. And the brothers and 1 sister that I met are real kool. __________________ 1979 GMC Sierra 15 1986 Danco Rollback 454 4spd 1986 Jerr-Dan Rollback 454 4spd 1978 GMC Jerr-Dan 454 Tonawanda 4spd FOR SALE 85 Chevy Wrecker 454 4spd AATAC Always a Friend...Michael

12-29-2009, 09:26 PM	#14
sharpmotors Registered User Join Date: Nov 2009 Location: bridgeport,ct Posts: 63	Re: Hey I'm new here..my k20 awesome lookin rig you got,i lso got bit recently and bought a 85 k20

12-29-2009, 11:28 PM	#15
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Hey I'm new here..my k20 nice truckk paint that back bumper black tooo (: black on,black on, black __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90



Register or Log In To remove these advertisements.

12-29-2009, 11:54 PM	#16
78 Big10 454 78 Big10 454 Join Date: Jul 2008 Location: Pismo Beach, CA Posts: 839	Re: Hey I'm new here..my k20 Jordan, welcome from sunny SoCal! Impressive ride, my friend. If you have a question, someone on this Board will have the right answer.

12-30-2009, 10:42 PM	#17
JordanK20 Registered User Join Date: Dec 2009 Location: Long Island NY Posts: 14	Re: Hey I'm new here..my k20 Thanks alot guys...I can tell this forum has alot nice people willing to help and share. Nice to meet you all. Thanks "68 TT" I wasnt sure if I had a 4 inch lift but possibly a 6 inch lift wow thats awesome. yeah "3r!c84" I will either get new rear bumper or just paint it black. I was thinking about getting new tails with crome trim because there faded one has a crack. I think the LMC company is the best I've spent hours already looking over that catalog lol and I bought a Haynes manual. I also have a aluminum cap that needs to be repainted black. I was thinking about painting it camo for fun. I'll just use it summer going to beach and camping. Here pic of my jetta and truck

Register or Log In To remove these advertisements.