CA More parts from late model truck 1986* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevybuldr · 01-02-2010, 02:22 AM

So More parts from the 'burb
Sunvisors Dark blue nice shape and tight. Passanger side has a Mirror
20.00 + shipping
vacuum diaphragm cover for AC vent on passanger side
5.00 + shipping
Heater AC controls lens nice, Blower motor switch knob broken off
20.00 + shipping
Glove box door with non-locking knob, Glove box is no good
5.00 + shipping
Rear-door bottom carpet panels fit rear dually doors also, needs cleaned plus there is a small rip/hole on one.
10.00 + shipping

chevybuldr · 01-02-2010, 02:34 AM

Throttle pedal assembly for cruise control
SOLD
Throttle cable from 454 with cruise at Auto
SOLD
Complete hood hinge and spring assembly glass beaded and ready for paint
25.00 + shipping
Door lock actuators tested and do work
15.00 EACH + shipping
under hood wiring gutter not cracked or broken
5.00

chevybuldr · 01-02-2010, 02:36 AM

Silverado fender emblems plastic stick on these didnt use nuts on the studs on the back. Drivers does have the studs still on pass is broken off.
10.00 + shipping
Vacuum operated vert door for under cowl NOT BROKEN
15.00 + shipping

chevybuldr · 01-02-2010, 02:51 AM

Rubber wire grommets between doors and body On has a tear near the end about 1/3 away around
SOLD
Windshield wiper motor from delay system
25.00 + shipping

Outside door handles. Little pitting very nice shape driver quality
20.00 for BOTH + shipping

Lots of other parts PLEASE tell me what you need. Power window rear gate
REAR AC
3/4 ton 2wd suspension
Rear pwer windows.

chevybuldr · 01-05-2010, 11:42 AM

Ttt

Eighty-6 · 01-06-2010, 05:41 PM

How much is shipping on the visors to 78665. Also do you know if they can be dyed a different color?

chevybuldr · 01-06-2010, 10:26 PM

Quote:

Originally Posted by Eighty-6

How much is shipping on the visors to 78665. Also do you know if they can be dyed a different color?

shipping would be 10.00 via parcel post (3-7 days) for a total of 30.00, I Have never dyed anything so I can not say.

Eighty-6 · 01-07-2010, 11:42 AM

Quote:

Originally Posted by chevybuldr

shipping would be 10.00 via parcel post (3-7 days) for a total of 30.00, I Have never dyed anything so I can not say.

Let me make sure these can by dyed, if they can and they stay in the up position, aren't scratched or cracked I'll take them if you can wait till next Friday :-)

chevybuldr · 01-07-2010, 01:22 PM

Quote:

Originally Posted by Eighty-6

Let me make sure these can by dyed, if they can and they stay in the up position, aren't scratched or cracked I'll take them if you can wait till next Friday :-)

There are no cracks that I have seen. might be some small scratches from normal use and they stayed up pretty good and not bent up. Let me know what you figure out please.

49m · 01-07-2010, 11:21 PM

do you have the ac brackets for the engine

chevybuldr · 01-07-2010, 11:52 PM

Quote:

Originally Posted by 49m

do you have the ac brackets for the engine

Sorry I dont have the brackets.

MylilBowTie · 01-11-2010, 01:16 AM

thinking about these as well

Throttle pedal assembly for cruise control
10.00 + shipping
Throttle cable from 454 with cruise at Auto
10.00 + shipping

chevybuldr · 01-16-2010, 12:21 PM

Ttt

Big Port Jimmy 6 · 01-16-2010, 06:46 PM

upper door panel trim for left rear door? thanks Jay

chevybuldr · 01-16-2010, 06:58 PM

Quote:

Originally Posted by Big Port Jimmy 6

upper door panel trim for left rear door? thanks Jay

Are you talking about the piece that is attached to the door panel and then door pull attaches to?

Big Port Jimmy 6 · 01-16-2010, 07:41 PM

Quote:

Originally Posted by chevybuldr

Are you talking about the piece that is attached to the door panel and then door pull attaches to?

Yes , but want one with no door pull straps. Jay

chevybuldr · 01-16-2010, 09:56 PM

I believe this is what you are looking for. One has a broken stud. There are the typical scratches. I tried to get a good picture of the face but the flash was a killer. 15.00 shipped parcel post.

chevybuldr · 01-16-2010, 10:19 PM

Front turn signals for dual headlight/behind grill front end. The light on YOUR right has a scratch on the upper left corner.
25.00 shipped
Hood latch assembly for inside cab hood release. The hook has been glass beaded and the latch has been cleaned and greased.
25.00 shipped
Shiffter linkage from column to tranny. Two different tranny linkage. Pitted from rust.
20.00 shipped
Windshield wipper fluid reservore with spray motor. Not cracked or broken hold water and has cap. Unknown condition of the motor. One mounting point is cracked and broken, as seen in the picture
20.00 shipped
All shipping is parcel post

chevybuldr · 01-16-2010, 10:55 PM

Let me know what number you need.

chevybuldr · 01-16-2010, 11:11 PM

Passanger side door Latch assembly. It has been cleaned and greased.

25.00 shipped parcel post

*Stitch* · 01-17-2010, 10:02 AM

do you have the wiring harness that's inside the cab for the power windows and doors...I have a crewcab that has suburban power doors on it...the doors have the harnesses in them, but the crewcab originally did not have power doors, so there is no harness in the cab to hook them up...also, I see that you have the door jam boots, do you have all four or just two...thanks alot...

Chuck.

chevybuldr · 01-17-2010, 11:12 AM

I do have the harness that runs under the dash and plugs into the doors. Unfortunatly it was cut on both sides (driver/passanger) under the front seat. You would have to splice them back together as I kept the whole unit . Also I do have the rubber boots for all the doors. One for the front door is ripped about a 1/3 of the way around. Look at message number 4.
Go here and look at picture 45 for the underdash harnes and how it was cut.
http://67-72chevytrucks.com/vboard/s...=376980&page=2

*Stitch* · 01-17-2010, 01:25 PM

that's what I need...how much do you want for harness and the door pieces shipped to a business address at 29151.

85burb · 01-17-2010, 02:28 PM

do you have the strips for the front door like in pic 17? and do you have the blue fabric part the go by door handle on in side for the front door?

chevybuldr · 01-17-2010, 03:11 PM

check my other posting that had all the heater box stuff. i just posted the inserts. I dont have the aluminum looking inserts for the front sorry.

01-02-2010, 02:22 AM	#1
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	More parts from late model truck 1986* So More parts from the 'burb Sunvisors Dark blue nice shape and tight. Passanger side has a Mirror 20.00 + shipping vacuum diaphragm cover for AC vent on passanger side 5.00 + shipping Heater AC controls lens nice, Blower motor switch knob broken off 20.00 + shipping Glove box door with non-locking knob, Glove box is no good 5.00 + shipping Rear-door bottom carpet panels fit rear dually doors also, needs cleaned plus there is a small rip/hole on one. 10.00 + shipping Attached Images Last edited by chevybuldr; 01-02-2010 at 02:24 AM.

01-02-2010, 02:34 AM	#2
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Throttle pedal assembly for cruise control SOLD Throttle cable from 454 with cruise at Auto SOLD Complete hood hinge and spring assembly glass beaded and ready for paint 25.00 + shipping Door lock actuators tested and do work 15.00 EACH + shipping under hood wiring gutter not cracked or broken 5.00 Attached Images Last edited by chevybuldr; 01-15-2010 at 02:16 AM.

01-02-2010, 02:36 AM	#3
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Silverado fender emblems plastic stick on these didnt use nuts on the studs on the back. Drivers does have the studs still on pass is broken off. 10.00 + shipping Vacuum operated vert door for under cowl NOT BROKEN 15.00 + shipping Attached Images Last edited by chevybuldr; 02-15-2010 at 01:01 AM.

01-02-2010, 02:51 AM	#4
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Rubber wire grommets between doors and body On has a tear near the end about 1/3 away around SOLD Windshield wiper motor from delay system 25.00 + shipping Outside door handles. Little pitting very nice shape driver quality 20.00 for BOTH + shipping Lots of other parts PLEASE tell me what you need. Power window rear gate REAR AC 3/4 ton 2wd suspension Rear pwer windows. Attached Images Last edited by chevybuldr; 01-19-2010 at 10:17 AM.

01-05-2010, 11:42 AM	#5
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Ttt

01-06-2010, 05:41 PM	#6
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: More parts from late model truck 1986 How much is shipping on the visors to 78665. Also do you know if they can be dyed a different color?

01-07-2010, 11:21 PM	#10
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: More parts from late model truck 1986 do you have the ac brackets for the engine __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

01-11-2010, 01:16 AM	#12
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: More parts from late model truck 1986 thinking about these as well Throttle pedal assembly for cruise control 10.00 + shipping Throttle cable from 454 with cruise at Auto 10.00 + shipping __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

01-16-2010, 12:21 PM	#13
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Ttt

01-16-2010, 06:46 PM	#14
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: More parts from late model truck 1986 upper door panel trim for left rear door? thanks Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

01-16-2010, 09:56 PM	#17
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 I believe this is what you are looking for. One has a broken stud. There are the typical scratches. I tried to get a good picture of the face but the flash was a killer. 15.00 shipped parcel post. Attached Images

01-16-2010, 10:19 PM	#18
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Front turn signals for dual headlight/behind grill front end. The light on YOUR right has a scratch on the upper left corner. 25.00 shipped Hood latch assembly for inside cab hood release. The hook has been glass beaded and the latch has been cleaned and greased. 25.00 shipped Shiffter linkage from column to tranny. Two different tranny linkage. Pitted from rust. 20.00 shipped Windshield wipper fluid reservore with spray motor. Not cracked or broken hold water and has cap. Unknown condition of the motor. One mounting point is cracked and broken, as seen in the picture 20.00 shipped All shipping is parcel post Attached Images

01-16-2010, 10:55 PM	#19
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Let me know what number you need. Attached Images

01-16-2010, 11:11 PM	#20
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 Passanger side door Latch assembly. It has been cleaned and greased. 25.00 shipped parcel post Attached Images

01-17-2010, 10:02 AM	#21
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: More parts from late model truck 1986 do you have the wiring harness that's inside the cab for the power windows and doors...I have a crewcab that has suburban power doors on it...the doors have the harnesses in them, but the crewcab originally did not have power doors, so there is no harness in the cab to hook them up...also, I see that you have the door jam boots, do you have all four or just two...thanks alot... Chuck.



Register or Log In To remove these advertisements.

01-17-2010, 11:12 AM	#22
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 I do have the harness that runs under the dash and plugs into the doors. Unfortunatly it was cut on both sides (driver/passanger) under the front seat. You would have to splice them back together as I kept the whole unit . Also I do have the rubber boots for all the doors. One for the front door is ripped about a 1/3 of the way around. Look at message number 4. Go here and look at picture 45 for the underdash harnes and how it was cut. http://67-72chevytrucks.com/vboard/s...=376980&page=2

01-17-2010, 01:25 PM	#23
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: More parts from late model truck 1986 that's what I need...how much do you want for harness and the door pieces shipped to a business address at 29151.

01-17-2010, 02:28 PM	#24
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: More parts from late model truck 1986 do you have the strips for the front door like in pic 17? and do you have the blue fabric part the go by door handle on in side for the front door? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-17-2010, 03:11 PM	#25
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: More parts from late model truck 1986 check my other posting that had all the heater box stuff. i just posted the inserts. I dont have the aluminum looking inserts for the front sorry.

Register or Log In To remove these advertisements.