Tach Tin Template - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlckButy · 01-07-2010, 02:51 PM

Wanted to see if anyone had, or could create, a tach tin template for those of us not fortunate enough to locate a set of original tach tins. I am aware aftermarket tins are available, but for those hard to find clusters (SW especially) which require other specific attachments, it would be nice if we could modify the original tins we already have.

Anyone?

Thanks in advance!

OARNGESI · 01-07-2010, 10:53 PM

Isnt the factory tin indented were a tach would be i could be wrong

hchad18 · 01-07-2010, 11:09 PM

Quote:

Originally Posted by OARNGESI

Isnt the factory tin indented were a tach would be i could be wrong

Just looked at one and no it isnt. I wish it was, I have the tach but need the tin, glass and circuit board.

ironhill · 01-07-2010, 11:47 PM

I sold a rear tach tin to a guy earlier in the week on ebay but he hasn't paid for it yet if he ends up backing out of the deal I'll let you know. I also have a lense but the numbers are starting to come off it.

OARNGESI · 01-07-2010, 10:55 PM

YOU MAY BE INTERESTED IN THIS http://cgi.ebay.com/ebaymotors/67-72...Q5fAccessories

tcb-1 · 01-07-2010, 10:57 PM

Matthew, the rear tin was punched for the tach. GM probably had two part bins, one prior to punching (non tach) and one after (tach). I don't believe there was an indent that the cutout followed.

if my cluster was out of the truck, I'd hook you up Nato.

72BlckButy · 01-11-2010, 09:44 AM

bttt...

72BlckButy · 01-12-2010, 09:56 AM

Anyone?

72BlckButy · 01-20-2010, 10:20 PM

Try this again...

longhorn70gmc · 01-21-2010, 01:39 AM

Do you need help? I still haven't finished with the tac thread yet. I finally got all the instructions copied for you, but still need to post. The tac still is not installed on the tin yet, I have to order new turn signal card board tubes and find some suitable adhesive. Do you want me to trace the cut out part for you on the tin and mail it to you?
R/
Billy

longhorn70gmc · 01-21-2010, 01:41 AM

Let me know what you need, because mine is not put all the way together and not installed yet. That is why I haven't finished the thread yet.
R/
Billy

72BlckButy · 01-21-2010, 09:12 AM

Billy if you wouldn't mind tracing out the cut outs on the front and rear tins, that would be fantastic. As far as mailing it we can work something out on that, but I was hoping to see if we could have a reference point for any member wishing to upgrade their dash without the need to purchase new tins.

Would you mind getting some comparison shots of non-tach tins vs. tach tins?

I owe you one Billy!

longhorn70gmc · 01-22-2010, 04:24 PM

Sure,
I will go work that.
R/

longhorn70gmc · 01-22-2010, 08:03 PM

I made your template for you, do you have an address for me so I can send it to you?
R/

72BlckButy · 01-23-2010, 12:15 AM

Can't thank you enough Billy!

PM sent...

longhorn70gmc · 01-23-2010, 05:30 PM

Here are some pictures for reference for you. The first two are the original non tac back pan and the next pictures are of the new back pan with the tac cut out. This will give you an ideal of what it looks like. I took pictures with measurements, but the ruler didn't come out where you could read it.

longhorn70gmc · 01-28-2010, 03:57 AM

Hey Bro,
Your Templates are on the way, but I forgot to put the TAC directions in there for you. I will need to send another letter to ya. That was your surprise.
R/
Billy

01-07-2010, 02:51 PM	#1
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Tach Tin Template Wanted to see if anyone had, or could create, a tach tin template for those of us not fortunate enough to locate a set of original tach tins. I am aware aftermarket tins are available, but for those hard to find clusters (SW especially) which require other specific attachments, it would be nice if we could modify the original tins we already have. Anyone? Thanks in advance! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 01-07-2010 at 02:51 PM.

01-07-2010, 10:53 PM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Tach Tin Template Isnt the factory tin indented were a tach would be i could be wrong __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

01-07-2010, 11:47 PM	#4
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: Tach Tin Template I sold a rear tach tin to a guy earlier in the week on ebay but he hasn't paid for it yet if he ends up backing out of the deal I'll let you know. I also have a lense but the numbers are starting to come off it.

01-07-2010, 10:55 PM	#5
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Tach Tin Template YOU MAY BE INTERESTED IN THIS http://cgi.ebay.com/ebaymotors/67-72...Q5fAccessories __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

01-07-2010, 10:57 PM	#6
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Tach Tin Template Matthew, the rear tin was punched for the tach. GM probably had two part bins, one prior to punching (non tach) and one after (tach). I don't believe there was an indent that the cutout followed. if my cluster was out of the truck, I'd hook you up Nato. __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

01-11-2010, 09:44 AM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Tach Tin Template bttt... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-12-2010, 09:56 AM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Tach Tin Template Anyone? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-20-2010, 10:20 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Tach Tin Template Try this again... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-21-2010, 01:39 AM	#10
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Tach Tin Template Do you need help? I still haven't finished with the tac thread yet. I finally got all the instructions copied for you, but still need to post. The tac still is not installed on the tin yet, I have to order new turn signal card board tubes and find some suitable adhesive. Do you want me to trace the cut out part for you on the tin and mail it to you? R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-21-2010, 01:41 AM	#11
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Tach Tin Template Let me know what you need, because mine is not put all the way together and not installed yet. That is why I haven't finished the thread yet. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-21-2010, 09:12 AM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Tach Tin Template Billy if you wouldn't mind tracing out the cut outs on the front and rear tins, that would be fantastic. As far as mailing it we can work something out on that, but I was hoping to see if we could have a reference point for any member wishing to upgrade their dash without the need to purchase new tins. Would you mind getting some comparison shots of non-tach tins vs. tach tins? I owe you one Billy! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-22-2010, 04:24 PM	#13
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Tach Tin Template Sure, I will go work that. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-22-2010, 08:03 PM	#14
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Tach Tin Template I made your template for you, do you have an address for me so I can send it to you? R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-23-2010, 12:15 AM	#15
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Tach Tin Template Can't thank you enough Billy! PM sent... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-23-2010, 05:30 PM	#16
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Tach Tin Template Here are some pictures for reference for you. The first two are the original non tac back pan and the next pictures are of the new back pan with the tac cut out. This will give you an ideal of what it looks like. I took pictures with measurements, but the ruler didn't come out where you could read it. Attached Images __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE! Last edited by longhorn70gmc; 01-23-2010 at 05:32 PM. Reason: Added write up.



Register or Log In To remove these advertisements.

01-28-2010, 03:57 AM	#17
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Tach Tin Template Hey Bro, Your Templates are on the way, but I forgot to put the TAC directions in there for you. I will need to send another letter to ya. That was your surprise. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

Register or Log In To remove these advertisements.