My day with the H/VAC system - The 1947 - Present Chevrolet & GMC Truck Message Board Network

apstguy · 01-26-2003, 10:34 PM

My entire day today was spent working on my truck. First, I washed it (wow it sparkles!!!) and then replaced my Voltometer from the one in the cluster I picked up from the swap meet. It works!!! The oil pressure doesn't though.. the sender must be bad or this gauge is bad too. I'll replace the sender next.

The demon H/VAC system was next. I took my dash off and ripped every hose & tube leading to a vent out. I left the core in (heater, A/C & fan) and found out why my system wasn't working right. There is a plastic arm that positions the main door that snapped. The only plastic moving piece broke (didn't doubt it would be plastic). My defroster didn't work very well and the vents stayed on when it was in the heater position. This will fix it. If you have the same problems I do, open your sytem up and replace this plastic @$%#. At least it wasn't a vaccuum diaphram.

*mike reeh* · 01-26-2003, 11:52 PM

Cool. For a second I thought you ripped it all out and were going to leave it out.

glad to hear you fixed it.. the hvac system on our trucks, even the old ones are pretty *****in when they are working correctly.

mike

ironwood · 01-27-2003, 02:14 AM

I am new to this board, so Hi everyone.
As for your oil pressure gauge if you have to get one don't even try cause I have been told that chevy no longer makes the oil pressure gauge (new) anymore. If somebody knows where I can buy a new gauge let me know I have an aftermarket gauge and no light in it most of my driving is at night.

01-26-2003, 10:34 PM	#1
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	My day with the H/VAC system My entire day today was spent working on my truck. First, I washed it (wow it sparkles!!!) and then replaced my Voltometer from the one in the cluster I picked up from the swap meet. It works!!! The oil pressure doesn't though.. the sender must be bad or this gauge is bad too. I'll replace the sender next. The demon H/VAC system was next. I took my dash off and ripped every hose & tube leading to a vent out. I left the core in (heater, A/C & fan) and found out why my system wasn't working right. There is a plastic arm that positions the main door that snapped. The only plastic moving piece broke (didn't doubt it would be plastic). My defroster didn't work very well and the vents stayed on when it was in the heater position. This will fix it. If you have the same problems I do, open your sytem up and replace this plastic @$%#. At least it wasn't a vaccuum diaphram. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

01-27-2003, 02:14 AM	#3
ironwood $640 truck// doesn't run Join Date: Jan 2003 Location: Buckley,Wa Posts: 122	oil pressure gauge I am new to this board, so Hi everyone. As for your oil pressure gauge if you have to get one don't even try cause I have been told that chevy no longer makes the oil pressure gauge (new) anymore. If somebody knows where I can buy a new gauge let me know I have an aftermarket gauge and no light in it most of my driving is at night.

01-26-2003, 11:52 PM	#2
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 683	Cool. For a second I thought you ripped it all out and were going to leave it out. glad to hear you fixed it.. the hvac system on our trucks, even the old ones are pretty *****in when they are working correctly. mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.