You gotta drive it all out!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*highperf4x4* · 01-19-2010, 10:39 PM

YouTube- muddin at smith ford

Rollinsqrbdy · 01-19-2010, 10:43 PM

I couldnt watch it all. In my own personal opinion that was F@#$@n STUPID. I almost cried for the truck. Again thats my own opinion.

y5mgisi · 01-21-2010, 12:08 AM

Quote:

Originally Posted by Rollinsqrbdy

I couldnt watch it all. In my own personal opinion that was F@#$@n STUPID. I almost cried for the truck. Again thats my own opinion.

Furthermore, You dont think if you were that truck, You wouldn't as hyped as all get out once you made it out of those holes? If a truck could talk it would probably say, "Hell Ya! Did you guys see what i just did?!? Cause that sh!t was insane! I'd like to see you pansys do that!

"

Colesnsty68 · 01-21-2010, 12:10 AM

That was bada$$. yes i hate to see truck get the living hel kicked outta them but it was pretty kool. glad it wasnt my truck.

Rollinsqrbdy · 01-21-2010, 03:20 PM

Quote:

Originally Posted by y5mgisi

Furthermore, You dont think if you were that truck, You wouldn't as hyped as all get out once you made it out of those holes? If a truck could talk it would probably say, "Hell Ya! Did you guys see what i just did?!? Cause that sh!t was insane! I'd like to see you pansys do that!

"

I appologized i probally should of rephrased what i said. Pansys?

Sure okay Read the signature. I choose not to go that extreme though. Again sorry for my earlier choice of bad words.

chevymotocross · 01-19-2010, 10:46 PM

Very stupid. Engine sounds.... or sounded at one time strong though.

3r!c84 · 01-19-2010, 10:50 PM

i love reving it and shifting it in and out fo drive and reveres

arkracing · 01-19-2010, 10:53 PM

New Trans anyone? I guess if I had a free truck that was all rotted and on it's last leg, it could be fun. Even then I don't know.

Might I suggest welding the spider gears up - it's like a free locker

Rollinsqrbdy · 01-19-2010, 10:58 PM

Quote:

Originally Posted by 3r!c84

i love reving it and shifting it in and out fo drive and reveres

I used to also, but i got tired of snapping drive lines and breaking crap

Hoffman65burb · 01-20-2010, 03:42 AM

Quote:

Originally Posted by Rollinsqrbdy

I used to also, but i got tired of snapping drive lines and breaking crap

lol, definatly smoked my clutch out, had to get the big cummins to winch me out and tow me to the shop

*highperf4x4* · 01-19-2010, 11:07 PM

ARE YOU FREAKING KIDDING ME?

Hey if you don't like muddin that's fine. Don't call us stupid though. We don't throw stones at a bunch of panzies driving around in show trucks looking to get rid of every little finger print on the paint.

I've snapped drive lines, front axles, clutches, springs and whatever else that needs to be replaced with a tougher part. If you don't like it fine. Work your own hobby.

*78 Chevyrado* · 01-19-2010, 11:19 PM

Quote:

Originally Posted by highperf4x4

ARE YOU FREAKING KIDDING ME?

Hey if you don't like muddin that's fine. Don't call us stupid though. We don't throw stones at a bunch of panzies driving around in show trucks looking to get rid of every little finger print on the paint.

I've snapped drive lines, front axles, clutches, springs and whatever else that needs to be replaced with a tougher part. If you don't like it fine. Work your own hobby.

I've got the shiny truck, now all I need is an old blazer for muddin... Always wanted to do that. Best I can do now is on the tractor or the golf cart.... oh the poor poor golf cart.

Think Jackass!

Rollinsqrbdy · 01-19-2010, 11:24 PM

Quote:

Originally Posted by highperf4x4

ARE YOU FREAKING KIDDING ME?

Hey if you don't like muddin that's fine. Don't call us stupid though. We don't throw stones at a bunch of panzies driving around in show trucks looking to get rid of every little finger print on the paint.

I've snapped drive lines, front axles, clutches, springs and whatever else that needs to be replaced with a tougher part. If you don't like it fine. Work your own hobby.

AGAIN I SAID THATS MY P.O. Calm down I never said you were stupid. I also like to mud, read the signature. Their is a 4x4 forum you know. I just aint got the money like others to completely trash my rides. To each his own so calm down.

Benelli · 01-19-2010, 11:18 PM

What was up with the toolbox?

That was just flat out hard on things, the first 30 seconds sucked and where lame, but the rest of it was alright. I don't really like watching guys beat the ever living hell out of nice looking trucks. Needs locked axles.

*highperf4x4* · 01-19-2010, 11:24 PM

*highperf4x4* · 01-19-2010, 11:34 PM

That's right, to each his own so you didn't have any right to call it "F@#$@n STUPID"

Rollinsqrbdy · 01-19-2010, 11:40 PM

Again in my P.O IT IS. I Like playin in the mudd also bud but i think they went a lil to far. Didnt mean to offend u

63chevyll · 01-19-2010, 11:50 PM

so be it, i woulda done the same thing......maybe with a few cold ones in me. But no matter what kind of truck, that kind of driving is hard on equipment.

MUD ONN

*highperf4x4* · 01-19-2010, 11:52 PM

Ok, I'll drop it.

**N2TRUX** · 01-20-2010, 12:02 AM

Quote:

Originally Posted by highperf4x4

Ok, I'll drop it.

Good idea. Nothing wrong with beating on your own stuff, since it is "your" stuff. Just don't post it and not expect to get some grief.

*highperf4x4* · 01-20-2010, 12:13 AM

Quote:

Originally Posted by N2TRUX

Good idea. Nothing wrong with beating on your own stuff, since it is "your" stuff. Just don't post it and not expect to get some grief.

That's not my truck dude. Mine is 90 GMC K1500. I posted the video because it psyched me up to head for some mud this weekend and then I got hit with the buzzkill bomb.

If you're suggesting that I should have known that when I posted something to my chevy brothers here in the forums they would have called it F@#$@n STUPID, then I must be in the wrong place.

Just for the record, I didn't see a single thing get tore up on that truck. The flopping toolbox in the bed could have come from a Ford for all I know. I guess I need to drop it again huh? I'll just scoot my sorry butt back over to the 67-72 section where I belong.

**N2TRUX** · 01-20-2010, 09:19 PM

Quote:

Originally Posted by highperf4x4

I guess you edited my title too huh?

Yes, that is correct.

Quote:

Originally Posted by highperf4x4

.... I guess I need to drop it again huh? I'll just scoot my sorry butt back over to the 67-72 section where I belong.

Your welcome to post here, or any place on this forum, as long as you post in a positive manner. Sorry for the buzzkill cuz....

*highperf4x4* · 01-20-2010, 12:17 AM

Quote:

Originally Posted by N2TRUX

Good idea. Nothing wrong with beating on your own stuff, since it is "your" stuff. Just don't post it and not expect to get some grief.

I guess you edited my title too huh?

Rollinsqrbdy · 01-19-2010, 11:57 PM

dropped

Rollinsqrbdy · 01-19-2010, 11:58 PM

It looks like a mean truck though nice looking too

01-19-2010, 10:43 PM	#2
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: You gotta drive it balls out!! I couldnt watch it all. In my own personal opinion that was F@#$@n STUPID. I almost cried for the truck. Again thats my own opinion. __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

01-21-2010, 12:10 AM	#4
Colesnsty68 Registered User Join Date: Jun 2009 Location: Arvada, Colorado Posts: 210	Re: You gotta drive it all out!! That was bada$$. yes i hate to see truck get the living hel kicked outta them but it was pretty kool. glad it wasnt my truck. __________________ 1970 Chevrolet custom camper 20 2000 F@$d F250 Powerjoke "And i still like bologna on white bread now and then" -Alan Jackson

01-19-2010, 10:46 PM	#6
chevymotocross Registered User Join Date: May 2007 Location: East Haven, CT Posts: 882	Re: You gotta drive it balls out!! Very stupid. Engine sounds.... or sounded at one time strong though. __________________ 87 Chevy 2wd SWB: 305/700r4 Dual Exhaust, K&N Filter, Injector Pod Spacer, TBI Spacer, Belltech Front Sway Bar, Corvette Servo, Western Chassis 4/6 and c-notch

01-19-2010, 10:50 PM	#7
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: You gotta drive it balls out!! i love reving it and shifting it in and out fo drive and reveres __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

01-19-2010, 10:53 PM	#8
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: You gotta drive it balls out!! New Trans anyone? I guess if I had a free truck that was all rotted and on it's last leg, it could be fun. Even then I don't know. Might I suggest welding the spider gears up - it's like a free locker __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

01-19-2010, 11:07 PM	#11
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: You gotta drive it balls out!! ARE YOU FREAKING KIDDING ME? Hey if you don't like muddin that's fine. Don't call us stupid though. We don't throw stones at a bunch of panzies driving around in show trucks looking to get rid of every little finger print on the paint. I've snapped drive lines, front axles, clutches, springs and whatever else that needs to be replaced with a tougher part. If you don't like it fine. Work your own hobby.

01-19-2010, 11:18 PM	#14
Benelli Watchin the rust grow Join Date: Oct 2008 Location: Western Nebraska Posts: 950	Re: You gotta drive it balls out!! What was up with the toolbox? That was just flat out hard on things, the first 30 seconds sucked and where lame, but the rest of it was alright. I don't really like watching guys beat the ever living hell out of nice looking trucks. Needs locked axles. __________________ 1979 Chevy K10 (H/D Front end) - 350 w/ Holley Truck Avenger, Weinald Intake manifold, headers, bored .060 over, mild cam, Built up TH350 (TranStar Shift kit) with a part-timed NP203 t-case SOLD ($3,000) 1997 Chevy Silverado 1500 - 4.3 vortec, extended cab, 21 highway MPG, stock. "Red" SOLD ($3,000) 1987 Toyota 4wd Pick-up - work in progress, future DD SOLD ($1,850) 1998 Dodge Ram 2500 Cummins 5spd Quad cab - old 12 valve with some work done 2004 Chevy Silverado - Black, 4x4, 5.3L, stock for now Underneath that rust is a heart of gold

01-19-2010, 11:24 PM	#15
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: You gotta drive it balls out!!

01-19-2010, 11:34 PM	#16
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: You gotta drive it balls out!! That's right, to each his own so you didn't have any right to call it "F@#$@n STUPID"

01-19-2010, 11:40 PM	#17
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: You gotta drive it balls out!! Again in my P.O IT IS. I Like playin in the mudd also bud but i think they went a lil to far. Didnt mean to offend u __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club--- Last edited by Rollinsqrbdy; 01-19-2010 at 11:41 PM.

01-19-2010, 11:50 PM	#18
63chevyll gets board easy....... Join Date: Mar 2009 Location: Colorado Springs Posts: 717	Re: You gotta drive it balls out!! so be it, i woulda done the same thing......maybe with a few cold ones in me. But no matter what kind of truck, that kind of driving is hard on equipment. MUD ONN

01-19-2010, 11:52 PM	#19
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: You gotta drive it balls out!! Ok, I'll drop it.

01-19-2010, 11:57 PM	#24
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: You gotta drive it all out!! dropped __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

01-19-2010, 11:58 PM	#25
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: You gotta drive it all out!! It looks like a mean truck though nice looking too __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.