kick panel install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffro788 · 01-25-2010, 03:46 PM

Hey guys, I ordered a set of kick panels that you can put speakers in and didn't realize there was so much modifying to be done. I realize that I will need to drill holes for the lever to open the vent on one side and the vaccum canister for the other, but I didn't realize I would have to cut off most of the back section on the passenger side because of the contour of the cab. Has anyone else had to do this or did I get the wrong panels?

Mondo · 01-25-2010, 07:36 PM

Did you check these out?
I wish he had these before I bought the only ones I could find... that's my truck with the smooth cowl I got from Tony by the way

http://67-72chevytrucks.com/vboard/s....php?p=3747440

**leddzepp** · 01-25-2010, 07:45 PM

I had to trim mine in the manner you described. I used a dremel tool....no biggie.

jeffro788 · 01-28-2010, 04:37 PM

How are they held in place on the kick panel of the trk? it says the weather stripping holds them but that is hard to believe.

grs · 01-30-2010, 04:39 PM

I put 6 by 9 speakers in my 69 truck doors. I did not know if the kickpanel speakers would hit the emergency brake pedal or not. Don't put speakers under the seat. They sound terrible.

**leddzepp** · 01-31-2010, 04:59 AM

Quote:

Originally Posted by jeffro788

How are they held in place on the kick panel of the trk? it says the weather stripping holds them but that is hard to believe.

I used 3M double sided tape. Worked perfect.

01-25-2010, 03:46 PM	#1
jeffro788 Registered User Join Date: May 2009 Location: Little Rock, AR Posts: 71	kick panel install Hey guys, I ordered a set of kick panels that you can put speakers in and didn't realize there was so much modifying to be done. I realize that I will need to drill holes for the lever to open the vent on one side and the vaccum canister for the other, but I didn't realize I would have to cut off most of the back section on the passenger side because of the contour of the cab. Has anyone else had to do this or did I get the wrong panels?

01-25-2010, 07:36 PM	#2
Mondo Registered User Join Date: Aug 2007 Location: Bakersfield, Ca Posts: 538	Re: kick panel install Did you check these out? I wish he had these before I bought the only ones I could find... that's my truck with the smooth cowl I got from Tony by the way http://67-72chevytrucks.com/vboard/s....php?p=3747440 Last edited by Mondo; 01-25-2010 at 07:40 PM.

01-25-2010, 07:45 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: kick panel install I had to trim mine in the manner you described. I used a dremel tool....no biggie. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-28-2010, 04:37 PM	#4
jeffro788 Registered User Join Date: May 2009 Location: Little Rock, AR Posts: 71	Re: kick panel install How are they held in place on the kick panel of the trk? it says the weather stripping holds them but that is hard to believe.

01-30-2010, 04:39 PM	#5
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: kick panel install I put 6 by 9 speakers in my 69 truck doors. I did not know if the kickpanel speakers would hit the emergency brake pedal or not. Don't put speakers under the seat. They sound terrible.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.