Looking for build threads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454inthehood · 01-25-2010, 10:15 PM

I feel like all the threads ive been reading about bagging c10s everybody is using some sort of a dropmember?

So my question is, does anybody know what some of the pros and cons of using a dropmember compared to using stock crossmember?

Thanks in advance!

*project 67 sub* · 01-25-2010, 10:30 PM

i dont think that there would be any cons of using a dropmember, i dont even have one and all i can think of is positives about it

Ronm909 · 01-25-2010, 10:54 PM

only con is MONEY$.. it raised, converts to rack an pinion, includes motor mounts, and centers wheel within the opening. plus it keeps suspension geometry correct so your tires dont look like they are falling inward at the top. oh and a stock crossmember does not allow your frame to lay unless you hack it up. AND you can steer while laid out, did I forget anything??

FRENCHBLUE72 · 01-25-2010, 11:49 PM

In this economy price is the only down fall that I see..

01-25-2010, 10:15 PM	#1
454inthehood Registered User Join Date: Dec 2008 Location: Poughkeepsie, NY Posts: 43	Looking for build threads I feel like all the threads ive been reading about bagging c10s everybody is using some sort of a dropmember? So my question is, does anybody know what some of the pros and cons of using a dropmember compared to using stock crossmember? Thanks in advance! __________________ 67 c10 Stockfloor Bodydrop

01-25-2010, 10:30 PM	#2
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Looking for build threads i dont think that there would be any cons of using a dropmember, i dont even have one and all i can think of is positives about it

01-25-2010, 10:54 PM	#3
Ronm909 67GMC Slammed Join Date: Feb 2009 Location: Rancho Cucamonga, Ca Posts: 255	Re: Looking for build threads only con is MONEY$.. it raised, converts to rack an pinion, includes motor mounts, and centers wheel within the opening. plus it keeps suspension geometry correct so your tires dont look like they are falling inward at the top. oh and a stock crossmember does not allow your frame to lay unless you hack it up. AND you can steer while laid out, did I forget anything??

01-25-2010, 11:49 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Looking for build threads In this economy price is the only down fall that I see.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.