1:10 Square body 4x4

[Tex_50613]

here's a little project I'm working on that some of you guys might like, just keep in mind it's a long way from done

[Tex_50613]

[Andy4639]

That's a old Clod Buster body ant it. I have a couple of those myself. They are great R/C trucks back in ther day.
Cool cutomizing with the chassis. What did you use?

[Tex_50613]

yeah it is/was..... as for the chassis it's a Hot racing chassis and old Bruiser axels, suspention, motor/trans, alot of other misc. rc parts plus a lot of extra work
here's some pics of the chassis, and also the body befor I stretched it to fit and started the other work to it

[Scootin 81 C20]

Any chance you would build one of these for someone?

[Tex_50613]

Originally Posted by Scootin 81 C20

Any chance you would build one of these for someone?

yeah sure, the bare body (for a new body) runs about $80, this grill and a 90's K5/Suburban grill are the only 2 avalable at this time without makeing it myself, if you want to know anyother details just shoot me a PM or a e-mail, also the chassis arn't cheep at all

[andrewmp6]

The super clod is the same body but the chevy grill and tailgate was the first clod and hard to get now.And there was a jr clod that was smaller and 2wd the body is good for smaller scale trucks.The truck looks great are you going to make a winch for it out of a servo?Or you can buy one from rc4wdstore.com they also have some wagon wheel looking 2.2 beadlocks too.

[Tex_50613]

Originally Posted by andrewmp6

The super clod is the same body but the chevy grill and tailgate was the first clod and hard to get now.And there was a jr clod that was smaller and 2wd the body is good for smaller scale trucks.The truck looks great are you going to make a winch for it out of a servo?Or you can buy one from rc4wdstore.com they also have some wagon wheel looking 2.2 beadlocks too.

there is a guy on one of the scale forum's taht I'm on making re-productions of the grill and tailgates and another doing the 90's K-5 and Burb grill using cnc
I'm doing a servo winch, and as for wheels I'm going to use some custom made 1.9 or 1.5's

[Scootin 81 C20]

See how much it would cost to do an 81-82 single and double headlight grill. So what would be a good ballpark price for one built like mine as a 4x4? 2x4? It wouldn't need to be anything built super strong, just something fun for me to run around while we're out running the ATV. Powerslides, donuts, maybe some jumps would the extent of it.

[Tex_50613]

Originally Posted by Scootin 81 C20

See how much it would cost to do an 81-82 single and double headlight grill. So what would be a good ballpark price for one built like mine as a 4x4? 2x4? It wouldn't need to be anything built super strong, just something fun for me to run around while we're out running the ATV. Powerslides, donuts, maybe some jumps would the extent of it.

jumps take stringth, a good ready to run setup would cost you about $450-$500 with a body like yours

[Scootin 81 C20]

Would that include a remote or is that for just the truck? You do great work.

[Tex_50613]

Originally Posted by Scootin 81 C20

Would that include a remote or is that for just the truck? You do great work.

thanks for the complement,
I think that one could be done with controler for $500 you'd just have to get batterys for everything
and here's a update:
been working on the box floor and decided that I wanted a wood one, just keep in mind I'm no where's finished

[Tex_50613]

[Scootin 81 C20]

Dude, that is slick!!!!!!!! That looks like the bed from "Knucklebuster" on Gearz. You going to stain it or leave it natural? Any pics of the inside of the box before you started?

[Tex_50613]

yeah, the last pic of the body rite after I painted the truck, the box floor was only about 1/2 inch deep, now it's 1 3/4" deep except for a "tool box" that has no floor under it to hold the battery pack. the bed is stained Red Mehogany and all the white is painted flat black as of 10 minutes ago, I'll post pics in a couple minutes when they are done up-loading on my photobucket

[74 C-30]

thats pretty nice looking! i was looking to do a hardbody like that with a custom made frame since i have most of the parts to do with and the know how to get it done....but $$ was the issue. no $ means no axles

[Tex_50613]

Originally Posted by 74 C-30

thats pretty nice looking! i was looking to do a hardbody like that with a custom made frame since i have most of the parts to do with and the know how to get it done....but $$ was the issue. no $ means no axles

yeha I know how that goes, I was lucky with mine I got the vintage bruiser stuff in trade for doing up a ford on a axiel crawler chassis for a friend, but like rite now I ain't putting any more money in my rc's till I get a donor motor for my 84 after re-iterating why I don't wheel in the winter, I snapped my crankshaft last week pulling out a K-5

[andrewmp6]

The bed looks great how long did it take you?I have a 16 inch wheel base clod axled crawler i use to play with now it kinda collects dust.

[Stepsideride]

ouch on snapping the crank..........Hell Yeah for the Awesome RC Work

[Tex_50613]

Originally Posted by Stepsideride

ouch on snapping the crank..........Hell Yeah for the Awesome RC Work

thanks and thanks for the simpathy, I have done a little to the RC whilst I'v been sourcing the parts for my 83, here are some pics and video

[Tex_50613]

[IMG]http://i490.photobucket.com/albums/rr266/Tex5...

[IMG]http://i490.photobucket.com/albums/rr266/Tex5...

[Tex_50613]

here's a update for ya

[fryer1979]

Man that is awesome! Great job.

[FRENCHBLUE72]

Very cool I am just starting to get into scale builds..

[Tex_50613]

here's another 1:10 scaler I just started the body on, it's gonna be a 75 K-5 with a updated front clip and I beleive a full interrior or atleast dash, front seats and a taunno cover