GA 71 Project truck for sale - Gen III & 4L60E - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokinstang70 · 02-21-2010, 07:46 PM

I have a project truck I HATE to get rid of. I have been acquiring parts and getting ready to begin the restoration for nearly a year, but family obligations and finances have forced me to do so.

It is a very nice non a/c 71 c-10 that has the usual cancer (Rockers, cab corners, doors), but I have a nice set of spare front fenders and spare doors. I have a set of POL rear disc brakes, Oak wood bed kit (not installed) and a ton a extra parts for the cab and under the hood. The truck currently does not have a motor or trans installed in it.

However, I have an complete 2004 Chevrolet silverado rolling chassis with a 5.3L V8 and 4L60E setup with only 47,000 miles. The rolling chassis has everything... wiring, fuel tank, drive shaft, rear end, front suspension, rack and pinion steering, etc etc etc.

I also have all the brackets and mounts for the LS swap. Motor mounts, motor perches, and trans crossmember.

Again, I absolutely hate to get rid of this, but I think it is time.

As you can imagine, I have way more money in this than I can ever get out of it, but I do think the combination is worth every penny of $6,000. ( I'm pretty firm on that)

If you have any questions, please let me know.

I will try to post pics tomorrow of both the c-10 and the 2004 silverado.

Thanks... and please know I post this with much regret!!

jorgensensc · 02-21-2010, 08:19 PM

Is the bedwood kit for sale seperately? Please put me in line. Is it a short bed fleetside or stepside?
Shawn

meathead95 · 02-21-2010, 09:22 PM

how much for the 2004 silverado by itself?

smokinstang70 · 02-21-2010, 09:26 PM

Sorry.. forgot the details

71 shortbed, was driven back and forth to work everyday until about 3 months ago when I sold the motor and trans.

I would rather not separate any of it, unless a group wanted to get together to buy it all. I need it all gone at the same time.

Thanks

smokinstang70 · 02-23-2010, 05:16 PM

bump

jorgensensc · 02-23-2010, 07:20 PM

If you decide to sell the oak bed seperately shoot me a PM with a priced shipped to 77018 either via fedex, ups or greyhound. Thanks!

VA72C10 · 02-23-2010, 11:29 PM

sorry you have to sell. Seems like Meathead wants the 2004. How much would you want for the 71 and related parts? I'm not in a position to buy right now but you might sell both that way...

72SWBChevy · 02-27-2010, 01:56 PM

is this a fleetside or step side swb bed? I need a good condition SWB fleetside bed. Tks

02-21-2010, 07:46 PM	#1
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	71 Project truck for sale - Gen III & 4L60E I have a project truck I HATE to get rid of. I have been acquiring parts and getting ready to begin the restoration for nearly a year, but family obligations and finances have forced me to do so. It is a very nice non a/c 71 c-10 that has the usual cancer (Rockers, cab corners, doors), but I have a nice set of spare front fenders and spare doors. I have a set of POL rear disc brakes, Oak wood bed kit (not installed) and a ton a extra parts for the cab and under the hood. The truck currently does not have a motor or trans installed in it. However, I have an complete 2004 Chevrolet silverado rolling chassis with a 5.3L V8 and 4L60E setup with only 47,000 miles. The rolling chassis has everything... wiring, fuel tank, drive shaft, rear end, front suspension, rack and pinion steering, etc etc etc. I also have all the brackets and mounts for the LS swap. Motor mounts, motor perches, and trans crossmember. Again, I absolutely hate to get rid of this, but I think it is time. As you can imagine, I have way more money in this than I can ever get out of it, but I do think the combination is worth every penny of $6,000. ( I'm pretty firm on that) If you have any questions, please let me know. I will try to post pics tomorrow of both the c-10 and the 2004 silverado. Thanks... and please know I post this with much regret!! Last edited by smokinstang70; 02-21-2010 at 07:47 PM.

02-21-2010, 08:19 PM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 71 Project truck for sale - Gen III & 4L60E Is the bedwood kit for sale seperately? Please put me in line. Is it a short bed fleetside or stepside? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-21-2010, 09:22 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: 71 Project truck for sale - Gen III & 4L60E how much for the 2004 silverado by itself? __________________ 72 2wd blazer 72 swb 4x4

02-21-2010, 09:26 PM	#4
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 71 Project truck for sale - Gen III & 4L60E Sorry.. forgot the details 71 shortbed, was driven back and forth to work everyday until about 3 months ago when I sold the motor and trans. I would rather not separate any of it, unless a group wanted to get together to buy it all. I need it all gone at the same time. Thanks

02-23-2010, 05:16 PM	#5
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 71 Project truck for sale - Gen III & 4L60E bump

02-23-2010, 07:20 PM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 71 Project truck for sale - Gen III & 4L60E If you decide to sell the oak bed seperately shoot me a PM with a priced shipped to 77018 either via fedex, ups or greyhound. Thanks! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-23-2010, 11:29 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 71 Project truck for sale - Gen III & 4L60E sorry you have to sell. Seems like Meathead wants the 2004. How much would you want for the 71 and related parts? I'm not in a position to buy right now but you might sell both that way... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-27-2010, 01:56 PM	#8
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 71 Project truck for sale - Gen III & 4L60E is this a fleetside or step side swb bed? I need a good condition SWB fleetside bed. Tks __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.