WY 1970 GMC C10 292 4 speed PARTING - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 02-28-2010, 02:31 PM

Parting 1970 GMC C10 long bed, 292, 4 speed, body is rough.

Underhood harness, complete. $50 shipped. SOLD
Aircleaner and carb spacer. $45 shipped. SOLD
Aluminum T-stat housing. $20 shipped.
Headlight bezels, no damage. good to powdercoat or rechrome. $45 shipped.

Please reply in post. Thanks, Sharpie

*sharpie1972* · 02-28-2010, 02:32 PM

...

67slammer · 02-28-2010, 06:34 PM

what kinda shape are the vent windows in? price and shipping to pa please. thanks mike

turner15 · 03-03-2010, 12:39 PM

Quote:

Originally Posted by sharpie1972

...

Looking for that fender trim on the pass side. How much shipped to SC 29577

**bignbad** · 03-03-2010, 06:36 PM

how much for the shifter?If it is a sm465.

seadonkey · 03-03-2010, 07:30 PM

HI, I'm looking for an original engine mount crossmember, or I guess everything for mounting a 292 between the frame. What I've got is someone's homemade stuff that I'm looking to swap out. Let me know if you can help.
Thanks,
Nick

*sharpie1972* · 02-28-2010, 06:41 PM

Hi Mike, Non-chrome, no tint. Good shape. $75 shipped for the pair. I can post pics if you're interested. Thanks, Sharpie

**70STOVEBOLT** · 03-01-2010, 06:18 PM

I asked about the antenna on the other truck you are parting, but the one on this truck might work better since it's on the passenger side. Price plus shipping to 46562 please...

*mrhino* · 03-01-2010, 06:42 PM

interested in the heater box inside and out, all the door mechensims regulator, latch, rods, locks , glass channels that sorta thing. my zip is 46516

*mrhino* · 03-01-2010, 06:43 PM

what shape are the door panels in? are they metal?

*sharpie1972* · 03-01-2010, 07:07 PM

70stovebolt: antenna is in poor shape.
Mrhino: Heater boxes inside and out are in good shape. $150 shipped for everything.
Complete door guts for both sides. $125 shipped.
Door panels are metal. $65 pair shipped.

I can post pics if you're interested. Thanks, Sharpie

**70STOVEBOLT** · 03-02-2010, 08:37 AM

Thanks for the reply.

ffrancis63800frank · 03-02-2010, 05:31 PM

am in need of gas pedal linkage for 1970 chevy 3/4 4/4. can you help me?

*sharpie1972* · 03-02-2010, 06:43 PM

V8 or 6? Do you need complete from pedal to carb or just portions thereof? Sharpie

ffrancis63800frank · 03-02-2010, 10:27 PM

i have a v/8 and it runs ok. i think the linkage is off a newer truck because it is on a bind and it does not bolt on to the floor correctly. the pedal is hooked to the linkage and i have two tits on the floor to connect to the pedal that i assume should be there. i have seen what i think is the right linkage and it is rather simple, but i am not sure if what i saw is for six cylinders only. i have a new floor mounted pedal. i need the linkage and cable hook-up to the carb.

*sharpie1972* · 03-02-2010, 11:10 PM

Ok, I understand what you need. The pedal mount assembly will be the same on all 1970 trucks, the firewall side consists of a rod that attaches to the carb. The cable type set-up is 71/72 style. I can send you everything from pedal to carb for $30. Hope this helps, Sharpie

ffrancis63800frank · 03-03-2010, 07:01 AM

you got a deal. can i pay with pay-pal?

*sharpie1972* · 03-03-2010, 10:18 AM

PM sent. Sharpie

turner15 · 03-03-2010, 12:38 PM

Sent you a PM

*sharpie1972* · 03-04-2010, 09:48 AM

Bignbad: Yes sm465. $45 shipped and I got in another throttle pedal assembly like the one you sent a picture of.

Seadonkey: I will be pulling the motor and you will have first shot at all of the 292 mounting hardware.

Thanks, Sharpie

**71blksuper4x4** · 03-04-2010, 12:52 PM

Dennis, how is the shifter knob? Also, can you get me a pic of the shift boot and retainer. I am not sure if the one that came with our 70' is correct. Thanks Trevor

**bignbad** · 03-04-2010, 06:13 PM

Dennis,I'll take the shifter,i dont need the knob so that can go to Trevor.Also i'll take the throttle assembly.Let me know the total.Thanks Eric

seadonkey · 03-04-2010, 08:25 PM

thanks, just pm me when you have the motor out, and if you have pics that would be awesome.
Thanks
Nick

*sharpie1972* · 03-04-2010, 09:04 PM

Bignbad: PM sent.
Trevor: interesting one here, the shift boot and ring are nice on the GMC, but they are somewhat square shaped. They match the factory hole in the high hump, but are quite different from the set on a 1970 Chevy 4 speed I have at my shop as you can see in the pics. Both are straight six trucks. What shape is your floor hump hole? Sharpie

**71blksuper4x4** · 03-04-2010, 11:36 PM

Hey Dennis, my boot is oval like the 2nd one. I think my boot and retainer have too many holes in them. What would you take for the retainer and boot? My knob I have is correct from your pics and in good shape, so I won't need one. Trevor

02-28-2010, 02:31 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	1970 GMC C10 292 4 speed PARTING Parting 1970 GMC C10 long bed, 292, 4 speed, body is rough. Underhood harness, complete. $50 shipped. SOLD Aircleaner and carb spacer. $45 shipped. SOLD Aluminum T-stat housing. $20 shipped. Headlight bezels, no damage. good to powdercoat or rechrome. $45 shipped. Please reply in post. Thanks, Sharpie Attached Images Last edited by sharpie1972; 03-18-2010 at 08:29 PM.

02-28-2010, 02:32 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING ... Attached Images

02-28-2010, 06:34 PM	#3
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	Re: 1970 GMC C10 292 4 speed PARTING what kinda shape are the vent windows in? price and shipping to pa please. thanks mike __________________ 67 short bed stepside tach tilt buddy buckets bagged sittin on 20s and 4w disc brakes (not quite finnished)

03-03-2010, 06:36 PM	#5
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: 1970 GMC C10 292 4 speed PARTING how much for the shifter?If it is a sm465. __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

03-03-2010, 07:30 PM	#6
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 1970 GMC C10 292 4 speed PARTING HI, I'm looking for an original engine mount crossmember, or I guess everything for mounting a 292 between the frame. What I've got is someone's homemade stuff that I'm looking to swap out. Let me know if you can help. Thanks, Nick

02-28-2010, 06:41 PM	#7
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING Hi Mike, Non-chrome, no tint. Good shape. $75 shipped for the pair. I can post pics if you're interested. Thanks, Sharpie

03-01-2010, 06:18 PM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,344	Re: 1970 GMC C10 292 4 speed PARTING I asked about the antenna on the other truck you are parting, but the one on this truck might work better since it's on the passenger side. Price plus shipping to 46562 please... __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-01-2010, 06:42 PM	#9
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: 1970 GMC C10 292 4 speed PARTING interested in the heater box inside and out, all the door mechensims regulator, latch, rods, locks , glass channels that sorta thing. my zip is 46516 Last edited by mrhino; 03-01-2010 at 06:42 PM. Reason: add

03-01-2010, 06:43 PM	#10
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: 1970 GMC C10 292 4 speed PARTING what shape are the door panels in? are they metal?

03-01-2010, 07:07 PM	#11
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING 70stovebolt: antenna is in poor shape. Mrhino: Heater boxes inside and out are in good shape. $150 shipped for everything. Complete door guts for both sides. $125 shipped. Door panels are metal. $65 pair shipped. I can post pics if you're interested. Thanks, Sharpie

03-02-2010, 08:37 AM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,344	Re: 1970 GMC C10 292 4 speed PARTING Thanks for the reply. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-02-2010, 05:31 PM	#13
ffrancis63800frank Registered User Join Date: Aug 2009 Location: Kimbolton, Ohio Posts: 7	Re: 1970 GMC C10 292 4 speed PARTING am in need of gas pedal linkage for 1970 chevy 3/4 4/4. can you help me?

03-02-2010, 06:43 PM	#14
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING V8 or 6? Do you need complete from pedal to carb or just portions thereof? Sharpie

03-02-2010, 10:27 PM	#15
ffrancis63800frank Registered User Join Date: Aug 2009 Location: Kimbolton, Ohio Posts: 7	Re: 1970 GMC C10 292 4 speed PARTING i have a v/8 and it runs ok. i think the linkage is off a newer truck because it is on a bind and it does not bolt on to the floor correctly. the pedal is hooked to the linkage and i have two tits on the floor to connect to the pedal that i assume should be there. i have seen what i think is the right linkage and it is rather simple, but i am not sure if what i saw is for six cylinders only. i have a new floor mounted pedal. i need the linkage and cable hook-up to the carb.

03-02-2010, 11:10 PM	#16
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING Ok, I understand what you need. The pedal mount assembly will be the same on all 1970 trucks, the firewall side consists of a rod that attaches to the carb. The cable type set-up is 71/72 style. I can send you everything from pedal to carb for $30. Hope this helps, Sharpie



Register or Log In To remove these advertisements.

03-03-2010, 07:01 AM	#17
ffrancis63800frank Registered User Join Date: Aug 2009 Location: Kimbolton, Ohio Posts: 7	Re: 1970 GMC C10 292 4 speed PARTING you got a deal. can i pay with pay-pal?

03-03-2010, 10:18 AM	#18
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING PM sent. Sharpie

03-03-2010, 12:38 PM	#19
turner15 Registered User Join Date: Jan 2007 Location: Toronto Canada Posts: 265	Re: 1970 GMC C10 292 4 speed PARTING Sent you a PM

03-04-2010, 09:48 AM	#20
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING Bignbad: Yes sm465. $45 shipped and I got in another throttle pedal assembly like the one you sent a picture of. Seadonkey: I will be pulling the motor and you will have first shot at all of the 292 mounting hardware. Thanks, Sharpie

03-04-2010, 12:52 PM	#21
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 1970 GMC C10 292 4 speed PARTING Dennis, how is the shifter knob? Also, can you get me a pic of the shift boot and retainer. I am not sure if the one that came with our 70' is correct. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-04-2010, 06:13 PM	#22
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: 1970 GMC C10 292 4 speed PARTING Dennis,I'll take the shifter,i dont need the knob so that can go to Trevor.Also i'll take the throttle assembly.Let me know the total.Thanks Eric __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

03-04-2010, 08:25 PM	#23
seadonkey Registered User Join Date: Sep 2008 Location: Port Edwards wi Posts: 49	Re: 1970 GMC C10 292 4 speed PARTING thanks, just pm me when you have the motor out, and if you have pics that would be awesome. Thanks Nick

03-04-2010, 09:04 PM	#24
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1970 GMC C10 292 4 speed PARTING Bignbad: PM sent. Trevor: interesting one here, the shift boot and ring are nice on the GMC, but they are somewhat square shaped. They match the factory hole in the high hump, but are quite different from the set on a 1970 Chevy 4 speed I have at my shop as you can see in the pics. Both are straight six trucks. What shape is your floor hump hole? Sharpie Attached Images

03-04-2010, 11:36 PM	#25
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 1970 GMC C10 292 4 speed PARTING Hey Dennis, my boot is oval like the 2nd one. I think my boot and retainer have too many holes in them. What would you take for the retainer and boot? My knob I have is correct from your pics and in good shape, so I won't need one. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

Register or Log In To remove these advertisements.