FL Un-needed parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 03-07-2010, 04:50 PM

**** NEW PARTS ADDED DAILY!!! ****

I just picked up a 72 4 x 4 Blazer project that was in proces of being converted to a 2WD. I'm going to continue to convert it to a 68 2WD,

, so I have been sorting through the parts that I won't need . I'll add to the list as I go. Here's what I got so far:

*** Added parts: ***

68 steering wheel with horn button - $75 + shipping
Chrome vent windows, green glass, good seals - $100 + shipping
67 Chrome vent windows - $125

Complete 4 x 4 engine cradle - $50 shipped
small block stands - $30 + shipping
67 front fenders - very straight need minor rust repair - $100 for both (no shipping)
69-72 front fenders - very straight no rust - $150 for pair (no shipping)
Good set of complete 72 front parking lights (housings, pigtails, lenses) - $40 shipped
73-87 steering wheel - $40 shipped
71/72 bumper straight with nice chrome - $100 (no shipping)

Used hei + cap - $30 shipped
73 BB motor mounts - $60 shipped
4 x 4 blazer front and rear driveshafts $75 apiece or $125 for both + shipping
Dual electric fan setup (both checked good when powered up) - $30 + shipping
Th 350 auto shift linkage - $30 shipped

***** SOLD ****

Nice ac control panel with cables (no pitting) - ** SOLD Lynfield **
L/R A/C balls with center vent - ** Sold USMCcheyv **
Sport mirrors - ** SOLD BIGREDBEAST **(1 looks like a fairly new aftermarket, the other looks original (chrome is so so))
New a/c glove box - SOLD BIGREDBEAST **
Van tilt, b/u switch relocated - Sold
Original 69-72 black steering wheel, worn but no cracks - SOLD
CST 72 gas pedal, with cable and brackets - $45 shipped

Complete 72 inner and outer grill shell with hood latch, support bracket, side braces (L&R), emblem, and headlight trim. The plastic the egg carton has no cracks at all. The emblem is really nice. I don't think this is original, but it looks really good. The only bend in the outer trim is on the bottom and should be able to be straightened well enough that the bumper would hide it. ** Sold - Southern C10 **

69-72 core support minor rust below the battery box but no rust through - ** SOLD MAK71 **
NOS tail light trim, - ** SOLD KILLER71 **
Nice 4 x 4 auto high hump - ** SOLD GMGUY **
Tailgate handle relocator kit - ** SOLD Wancosc356 **

Southern C10 · 03-07-2010, 04:57 PM

I need that grille. Shipping would probably kill it anyway. Got pics of the fans? Nice score on the parts.

**Hart_Rod** · 03-07-2010, 05:12 PM

Quote:

Originally Posted by Southern C10

I need that grille. Shipping would probably kill it anyway. Got pics of the fans? Nice score on the parts.

Boardmember 71burb is coming down in the next week to get some parts. He lives north of Birmingham. I'm sure he wouldn't mind bringing it back with him. Pics of the fan and other parts. LMK.

r/

Southern C10 · 03-07-2010, 05:24 PM

Quote:

Originally Posted by Hart_Rod

Boardmember 71burb is coming down in the next week to get some parts. He lives north of Birmingham. I'm sure he wouldn't mind bringing it back with him. Pics of the fan and other parts. LMK.

r/

Rob. 71burb lives in Canada according to his profile. I will take the grille if I can get the guy you are talking about to pick it up.

Brian.

**Hart_Rod** · 03-07-2010, 05:33 PM

Quote:

Originally Posted by wancosc356

Hey Rob. Any pics of the tailgate handle relocator kit?

Mike here's a couple pictures.

Quote:

Originally Posted by Southern C10

Rob. 71burb lives in Canada according to his profile. I will take the grille if I can get the guy you are talking about to pick it up.

Brian.

Here's his profile:

http://www.67-72chevytrucks.com/vboa...er.php?u=41240

Jason is a cool guy and I'm sure he won't mind taking it back with him. I'm not sure when he's coming down, but it will be in the next week or two. If not, I'll be up in Montgomery within the next month.

**wancosc356** · 03-07-2010, 05:19 PM

Hey Rob. Any pics of the tailgate handle relocator kit?

**wancosc356** · 03-07-2010, 05:35 PM

Thanks man. Any idea what brand it is?

**Hart_Rod** · 03-07-2010, 05:43 PM

Quote:

Originally Posted by wancosc356

Thanks man. Any idea what brand it is?

I'm not sure Mike. I tried googling the numbers on it, but got nothing back. The main panel is galvanized and the whole setup looks solid.

R/

**wancosc356** · 03-07-2010, 05:45 PM

Quote:

Originally Posted by Hart_Rod

I'm not sure Mike. I tried googling the numbers on it, but got nothing back. The main panel is galvanized and the whole setup looks solid.

R/

Oh ok. Is the handle and mechanism steel or plastic?

Southern C10 · 03-07-2010, 05:46 PM

Rob,

I PMd him so I will let you know. I will pass on the fans. Not sure if I will need them.

Brian.

**Hart_Rod** · 03-07-2010, 05:48 PM

Quote:

Originally Posted by wancosc356

Oh ok. Is the handle and mechanism steel or plastic?

Handle is cast metal, not plastic. Everthing else is steel.

Quote:

Originally Posted by Southern C10

Rob,

I PMd him so I will let you know. I will pass on the fans. Not sure if I will need them.

Brian.

Sounds good.

nplocoman · 03-07-2010, 06:30 PM

I am interested in the fan and the hei distributor. Can you get a quote on shipping to 69101? Does the hei have a coil? Also do you have any plug wires to go with it?

**wancosc356** · 03-07-2010, 06:43 PM

Quote:

Originally Posted by Hart_Rod

Handle is cast metal, not plastic. Everthing else is steel.

I'll take it. PM sent.

Duncan and son · 03-07-2010, 07:42 PM

Rob, do you need a factory 2wd frame? We bought the one in okla.
Paul and Jason

**wancosc356** · 03-07-2010, 08:09 PM

Payment send for tailgate handle relocator kit. Thanks man.

nplocoman · 03-07-2010, 08:45 PM

I ended up with another distributor that I had checked on earlier. I will pass on both. Thanks for the price quote.

BigRed Beast · 03-07-2010, 08:50 PM

I'm in for the ac glove box...shipped to 80138. Got any exterior mirrors?

**Hart_Rod** · 03-07-2010, 08:52 PM

Quote:

Originally Posted by wancosc356

Payment send for tailgate handle relocator kit. Thanks man.

Your welcome!

Quote:

Originally Posted by nplocoman

I ended up with another distributor that I had checked on earlier. I will pass on both. Thanks for the price quote.

I'll go $70 shipped if you change your mind.

Quote:

Originally Posted by BigRed Beast

I'm in for the ac glove box...shipped to 80138. Got any exterior mirrors?

Thanks. What style?

Southern C10 · 03-08-2010, 07:57 AM

Rob,

Jason replied and he will pick up the grille. PM me your paypal info.

Brian.

64GMCHorsepower · 03-08-2010, 03:59 PM

Rob, can you give me the measurments on the fans please....

Southern C10 · 03-08-2010, 06:29 PM

Rob,

Payment sent for grille.

Brian.

LUCKTRUCK · 03-08-2010, 08:11 PM

hartrod, sorry I'm gonna pass on the linkage

**Hart_Rod** · 03-08-2010, 08:48 PM

Quote:

Originally Posted by 64GMCHorsepower

Rob, can you give me the measurments on the fans please....

Overall length or the diamter of the fans?

Quote:

Originally Posted by Southern C10

Rob,

Payment sent for grille.

Brian.

Thanks Brian!

Quote:

Originally Posted by LUCKTRUCK

hartrod, sorry I'm gonna pass on the linkage

No worries. Take care.

R/

64GMCHorsepower · 03-08-2010, 11:46 PM

overall length and height please on the fans please....

**Hart_Rod** · 03-08-2010, 11:51 PM

Quote:

Originally Posted by 64GMCHorsepower

overall length and height please on the fans please....

15 1/2" X 31"

I added more parts, nice ac control panel, 4 x 4 engine cradle, small block engine mounts....

03-07-2010, 04:50 PM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Un-needed parts ** NEW PARTS ADDED DAILY!!! I just picked up a 72 4 x 4 Blazer project that was in proces of being converted to a 2WD. I'm going to continue to convert it to a 68 2WD, , so I have been sorting through the parts that I won't need . I'll add to the list as I go. Here's what I got so far: * Added parts: * 68 steering wheel with horn button - $75 + shipping Chrome vent windows, green glass, good seals - $100 + shipping 67 Chrome vent windows - $125 Complete 4 x 4 engine cradle - $50 shipped small block stands - $30 + shipping 67 front fenders - very straight need minor rust repair - $100 for both (no shipping) 69-72 front fenders - very straight no rust - $150 for pair (no shipping) Good set of complete 72 front parking lights (housings, pigtails, lenses) - $40 shipped 73-87 steering wheel - $40 shipped 71/72 bumper straight with nice chrome - $100 (no shipping) Used hei + cap - $30 shipped 73 BB motor mounts - $60 shipped 4 x 4 blazer front and rear driveshafts $75 apiece or $125 for both + shipping Dual electric fan setup (both checked good when powered up) - $30 + shipping Th 350 auto shift linkage - $30 shipped * SOLD Nice ac control panel with cables (no pitting) - SOLD Lynfield L/R A/C balls with center vent - Sold USMCcheyv Sport mirrors - SOLD BIGREDBEAST (1 looks like a fairly new aftermarket, the other looks original (chrome is so so)) New a/c glove box - SOLD BIGREDBEAST Van tilt, b/u switch relocated - Sold Original 69-72 black steering wheel, worn but no cracks - SOLD CST 72 gas pedal, with cable and brackets - $45 shipped Complete 72 inner and outer grill shell with hood latch, support bracket, side braces (L&R), emblem, and headlight trim. The plastic the egg carton has no cracks at all. The emblem is really nice. I don't think this is original, but it looks really good. The only bend in the outer trim is on the bottom and should be able to be straightened well enough that the bumper would hide it. Sold - Southern C10 69-72 core support minor rust below the battery box but no rust through - SOLD MAK71 NOS tail light trim, - SOLD KILLER71 Nice 4 x 4 auto high hump - SOLD GMGUY Tailgate handle relocator kit - SOLD Wancosc356 Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 04-28-2010 at 10:35 AM.

03-07-2010, 04:57 PM	#2
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Un-needed parts I need that grille. Shipping would probably kill it anyway. Got pics of the fans? Nice score on the parts. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108 Last edited by Southern C10; 03-07-2010 at 04:58 PM.

03-07-2010, 05:19 PM	#6
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Un-needed parts Hey Rob. Any pics of the tailgate handle relocator kit? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-07-2010, 05:35 PM	#7
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Un-needed parts Thanks man. Any idea what brand it is? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-07-2010, 05:46 PM	#10
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Un-needed parts Rob, I PMd him so I will let you know. I will pass on the fans. Not sure if I will need them. Brian. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

03-07-2010, 06:30 PM	#12
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: Un-needed parts I am interested in the fan and the hei distributor. Can you get a quote on shipping to 69101? Does the hei have a coil? Also do you have any plug wires to go with it?

03-07-2010, 07:42 PM	#14
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Un-needed parts Rob, do you need a factory 2wd frame? We bought the one in okla. Paul and Jason __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

03-07-2010, 08:09 PM	#15
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Un-needed parts Payment send for tailgate handle relocator kit. Thanks man. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-07-2010, 08:45 PM	#16
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: Un-needed parts I ended up with another distributor that I had checked on earlier. I will pass on both. Thanks for the price quote.

03-07-2010, 08:50 PM	#17
BigRed Beast Registered User Join Date: Aug 2007 Location: Parker, CO Posts: 140	Re: Un-needed parts I'm in for the ac glove box...shipped to 80138. Got any exterior mirrors? __________________ Big Red Beast 1972 Blazer CST AC/Auto/4x4 "Project" 1997 F 350 CC Powerstroke "The Great White"

03-08-2010, 07:57 AM	#19
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Un-needed parts Rob, Jason replied and he will pick up the grille. PM me your paypal info. Brian. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

03-08-2010, 03:59 PM	#20
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Un-needed parts Rob, can you give me the measurments on the fans please.... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-08-2010, 06:29 PM	#21
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Un-needed parts Rob, Payment sent for grille. Brian. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

03-08-2010, 08:11 PM	#22
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Re: Un-needed parts hartrod, sorry I'm gonna pass on the linkage __________________ LUCKTRUCK

03-08-2010, 11:46 PM	#24
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Un-needed parts overall length and height please on the fans please.... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.