Finally about to begin! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68GMCCustom · 03-11-2010, 11:32 PM

Well, after months of saving I'm finally getting parts together for the next phase of my trucks life. Phase I brought two trucks together to make what it hase become. Now it will be joined back to its original frame, with all new or rebuilt components.

my new 6.0L (with intake and coil packs removed)

my fresh 200-4r built for 500+hp:

and custom 2500rpm stall torque convertor:

Lots more parts to buy though. I plan on starting on the frame in the next day or two. I also plan on starting a build thread.

I have a question though and hope someone can help. GM has had an intake in both their '09 GMPP catalog and the '10 GMPP catalog. The part number changed, but its the same part. Originally part number 19166952, its now ('10 catalog) showing number 19244037. What is it? A dual plane, LS3/L92 head, carb style intake. I'd like to buy one....if I can find someplace that has one!

nicolas72gmc · 03-11-2010, 11:39 PM

Ok Kurt, I'm jealous. My work truck has a 6.0L in it and I always wondered what it would feel like in our trucks. Who built your trans? That is exactly what I wanted to do rather than the 700r4. Looks like lots of fun bro.

68GMCCustom · 03-11-2010, 11:50 PM

Thanks! Accurate Trans out of Seagoville. He has built trans for my buddies, plus he's a racer...so I know he knows how to build them right.

I should show where it started. The '68 when I got it:

The '72 C-10 parts truck:

building 1 "better truck" from 2 that needed help:

Really looking forward to the next phase...I've wanted a carb'd LSx since I got the truck roughly 3 years ago!

68GMCCustom · 03-12-2010, 11:43 AM

Help please.

I have a question though and hope someone can help. GM has had an intake in both their '09 GMPP catalog and the '10 GMPP catalog. The part number changed, but its the same part. Originally part number 19166952, its now ('10 catalog) showing number 19244037. What is it? A dual plane, LS3/L92 head, carb style intake. I'd like to buy one....if I can find someplace that has one!

can anyone check these part numbers for me and tell me where I can get one? Thanks!

FLDBRED · 03-12-2010, 01:29 PM

Sir...what can one say...It doesn't get much better than that!

VA72C10 · 03-12-2010, 01:52 PM

looking forward to the build thread...and a bump so maybe someone who knows can answer your intake question....

69Goody · 03-29-2010, 01:20 PM

Awesome!
Building an LS of my own. Not sure if it will go in my 69 GMC or not though...it might and I can sell off the built SBC 400 to help on other areas.

Starting with a LQ4 6.0 bare iron block.
L92 Heads
4" Eagle stroker crank
4.005" Manley Forged Pistons
Scat Connecting Rods
Comp Cams 54-469-11
Lunati Gold .660 lift Dual Springs

Slowly getting the bits and pieces together. Been looking for the same intake you are. I have no word yet either...
Maybe if you and I call every dealer we can to inquire...word might get to GMPP to start kicking these out.

68GMCCustom · 03-29-2010, 02:52 PM

good thought. they've obviously done the engineering and the marketing work...so they ought to be available somewhere!

68GMCCustom · 03-30-2010, 03:26 PM

Well....now I know why I can't find one of those GMPP dual plane LSX-LS3 intakes. Even though they are in the '09 GMPP catalog AND the '10 GMPP catalog...according to "Pete" at Friendly Chevrolet (who called GMPP direct for me)...they haven't been released yet!

He said they plan to release them in about a month and that at that time I should be able to put in an order. With any luck...the truck will be all together...just waiting on that intake to be laid in place and a Holley HP 750 (or 850?) carb sitting on top!

Shon · 03-30-2010, 04:23 PM

you are going to like the 6.0!

03-11-2010, 11:32 PM	#1
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Finally about to begin! Well, after months of saving I'm finally getting parts together for the next phase of my trucks life. Phase I brought two trucks together to make what it hase become. Now it will be joined back to its original frame, with all new or rebuilt components. my new 6.0L (with intake and coil packs removed) my fresh 200-4r built for 500+hp: and custom 2500rpm stall torque convertor: Lots more parts to buy though. I plan on starting on the frame in the next day or two. I also plan on starting a build thread. I have a question though and hope someone can help. GM has had an intake in both their '09 GMPP catalog and the '10 GMPP catalog. The part number changed, but its the same part. Originally part number 19166952, its now ('10 catalog) showing number 19244037. What is it? A dual plane, LS3/L92 head, carb style intake. I'd like to buy one....if I can find someplace that has one! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 03-11-2010 at 11:51 PM.

03-11-2010, 11:39 PM	#2
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: Finally about to begin! Ok Kurt, I'm jealous. My work truck has a 6.0L in it and I always wondered what it would feel like in our trucks. Who built your trans? That is exactly what I wanted to do rather than the 700r4. Looks like lots of fun bro. __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

03-11-2010, 11:50 PM	#3
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Finally about to begin! Thanks! Accurate Trans out of Seagoville. He has built trans for my buddies, plus he's a racer...so I know he knows how to build them right. I should show where it started. The '68 when I got it: The '72 C-10 parts truck: building 1 "better truck" from 2 that needed help: Really looking forward to the next phase...I've wanted a carb'd LSx since I got the truck roughly 3 years ago! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-12-2010, 11:43 AM	#4
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Finally about to begin! Help please. I have a question though and hope someone can help. GM has had an intake in both their '09 GMPP catalog and the '10 GMPP catalog. The part number changed, but its the same part. Originally part number 19166952, its now ('10 catalog) showing number 19244037. What is it? A dual plane, LS3/L92 head, carb style intake. I'd like to buy one....if I can find someplace that has one! can anyone check these part numbers for me and tell me where I can get one? Thanks! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-12-2010, 01:29 PM	#5
FLDBRED Registered User Join Date: Jun 2009 Location: CENTRAL,NJ Posts: 586	Re: Finally about to begin! Sir...what can one say...It doesn't get much better than that!

03-12-2010, 01:52 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Finally about to begin! looking forward to the build thread...and a bump so maybe someone who knows can answer your intake question.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-29-2010, 01:20 PM	#7
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Re: Finally about to begin! Awesome! Building an LS of my own. Not sure if it will go in my 69 GMC or not though...it might and I can sell off the built SBC 400 to help on other areas. Starting with a LQ4 6.0 bare iron block. L92 Heads 4" Eagle stroker crank 4.005" Manley Forged Pistons Scat Connecting Rods Comp Cams 54-469-11 Lunati Gold .660 lift Dual Springs Slowly getting the bits and pieces together. Been looking for the same intake you are. I have no word yet either... Maybe if you and I call every dealer we can to inquire...word might get to GMPP to start kicking these out. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

03-29-2010, 02:52 PM	#8
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Finally about to begin! good thought. they've obviously done the engineering and the marketing work...so they ought to be available somewhere! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-30-2010, 03:26 PM	#9
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Finally about to begin! Well....now I know why I can't find one of those GMPP dual plane LSX-LS3 intakes. Even though they are in the '09 GMPP catalog AND the '10 GMPP catalog...according to "Pete" at Friendly Chevrolet (who called GMPP direct for me)...they haven't been released yet! He said they plan to release them in about a month and that at that time I should be able to put in an order. With any luck...the truck will be all together...just waiting on that intake to be laid in place and a Holley HP 750 (or 850?) carb sitting on top! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-30-2010, 04:23 PM	#10
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: Finally about to begin! you are going to like the 6.0! __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.