AT shift point question for the masses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70Custom10Nut · 03-13-2010, 11:45 AM

When coming of a traffic light, with the selector in "Drive", what RPM does your trans go to second and then third? I have a B&M shift kit in mine and I think it is shifting too soon causing a bog if I'm on it too much. Right now it shifts about 2-2200 rpm, I think if I raised the shift point it would alleviate my issue. Of course leisurely shifting the point varies, but my concern is shifting under power. I put a new modulator on the trans years ago and thought I had it set right. Would 3000 rpm be too high for this? Cnut

Sinister · 03-13-2010, 11:56 AM

Here's a good thread over at www.hotrodders.com on the subject:http://www.hotrodders.com/forum/th35...ts-174188.html

03-13-2010, 11:45 AM	#1
70Custom10Nut Registered User Join Date: Sep 2007 Location: Vilseck Germany (currently) Posts: 317	AT shift point question for the masses When coming of a traffic light, with the selector in "Drive", what RPM does your trans go to second and then third? I have a B&M shift kit in mine and I think it is shifting too soon causing a bog if I'm on it too much. Right now it shifts about 2-2200 rpm, I think if I raised the shift point it would alleviate my issue. Of course leisurely shifting the point varies, but my concern is shifting under power. I put a new modulator on the trans years ago and thought I had it set right. Would 3000 rpm be too high for this? Cnut

03-13-2010, 11:56 AM	#2
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: AT shift point question for the masses Here's a good thread over at www.hotrodders.com on the subject:http://www.hotrodders.com/forum/th35...ts-174188.html __________________ Beat it to fit, Paint it to match...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.