IN 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 03-22-2010, 10:00 PM

I parted out a 1968 C20 last weekend and here are some of the parts I am getting rid of. I have close up pictures of all parts but instead of cluttering the thread up with pictures of unwanted parts I will post pictures as asked.

---Respond to the thread as per rules and to keep the confusion down.---

1. Choke Delete in good overall condition but the black paint is flaked/ cracked, The "GM" letters has some minor inperfections -- see pictures SOLD.

2. Dash cluster assy. in good shape and is made for the choke delete because it does not have the "choke" lettering on the right side. It was puled out of a nonrunning truck so true operation is unknown, circuit board looks good, I do not see any breaks/ cracks in the bezel but the outside silver trim is poor. I have more pictures if interested. SOLD

3. Vent doors including the arm and bracket, The doors have surface rust on the back side and need new seals but are solid and moved good before removing. $20.00 each or $35.00 for the pair plus shipping.

4. Jack items from inside the cab. 3 brackets, 2 springs and bolts, $10.00 plus shipping

5. Trim below the steering column at the instrument bezel. good used condition SOLD

6. Parking brake lever cover in good used condition but does have 2 holes in it--see pictures in post #4. SOLD

7. Speaker Bracket used condition with slight surface rust/ corrosion. $10.00 plus shipping

8. Ignition switch surround-- scuffed but usable, Free with other purchase or pay shipping only by itself

9. Cig. Lighter element, trim and socket, used, some corrotion SOLD.

10. Headlight switch knob and 2 retainer nuts, Used condition $5.00 plus shipping

11. Jack handle -- straight section is bent some $5.00 plus shipping

12. 68 Grille support- used, surface rust $10.00 plus shipping

13. Small Block Frame Stands- grease included $20.00 plus shipping for the pair

14. Grille bowtie emblem-- pitted and faded, studs good $5.00 plus shipping

15. Hood latch assy. - used condition, works good $10.00 plus shipping

16. Saftey Recall Frame Bracket with bolts $10.00 plus shipping

17. Automatic column shifter rod- used- SOLD

18. Automatic column shifter linkage frame pivot- used- SOLD

19. Door lock cylinders with arms and retainer clips-- no key-- $15.00 plus
shipping for the pair

20. 2 Hub Caps from C20 16 inch wheels-- used - SOLD

21. Door Latch rods- from the inside handle pivot to the latch assy. with the end clips $5.00 for the pair plus shipping

22. Brace that goes around the steering rod across the inner fender. Solid but rusty-- Free with the purchase of something else or the shipping cost if wanted seperately.

23. Washer solvent tank bracket- surface rust $5.00 plus shipping

I will accept PayPal or Money order and combine shipping when able.

**Todd68Chevy** · 03-22-2010, 10:05 PM

Here are a couple more pictures. The Choke Delete and the Cluster are being sold seperate. Please ask any questions you might have and if you want more pictures let me know, Thanks for looking, Todd

**wancosc356** · 03-22-2010, 10:20 PM

Does the e brake cover have any rust, dents or extra holes?

**Todd68Chevy** · 03-22-2010, 10:29 PM

Wancosc356 here are a couple pictures of of the park brake cover. I can put my hands on it tomorrow and verify but I do not remember any big issues with it. In the second picture the 2 small holes seen in the picture might be extra. I will look better tomorrow. Thanks, Todd

**wancosc356** · 03-22-2010, 10:30 PM

Thanks for the pics. Im gonna have to pass on it though.

**Todd68Chevy** · 03-22-2010, 10:32 PM

No problem, Thanks for looking

MARIOS68PANEL · 03-22-2010, 11:02 PM

I`ll take the cig Lighter . shipped to 95673?? Pm me paypal info and how much.

**Todd68Chevy** · 03-23-2010, 07:06 AM

Quote:

Originally Posted by wancosc356

Does the e brake cover have any rust, dents or extra holes?

The Park brake cover does have a couple holes in it-- see pictures in post #4, Price is marked down to $20.00 plus shipping. Thanks Todd

Quote:

Originally Posted by MARIOS68PANEL

I`ll take the cig Lighter . shipped to 95673?? Pm me paypal info and how much.

PM sent with shipping quote. Close up pictures attached. Thanks, Todd

**Todd68Chevy** · 03-26-2010, 01:17 PM

Quote:

Originally Posted by lolife99

I'll take the one good bezel for $15.00.
Let me know how you want to be paid.

Payment recieved, Item shipped, Thanks

Quote:

Originally Posted by MARIOS68PANEL

I`ll take the cig Lighter . shipped to 95673?? Pm me paypal info and how much.

Payment recieved, items shipped, Thanks

**lolife99** · 03-23-2010, 07:36 AM

Got any better pics of the headlight bezels? I need a nice set of 67-68 bezels.

**Todd68Chevy** · 03-23-2010, 06:28 PM

Quote:

Originally Posted by lolife99

Got any better pics of the headlight bezels? I need a nice set of 67-68 bezels.

Here are some close up pictures of the headlight bezels. They both need cleaned/ polished but I just noticed one is bent along the edge-- see pictures 1 & 2. Thanks, Todd

bguild · 09-02-2010, 10:07 PM

Quote:

Originally Posted by Todd68Chevy

Here are some close up pictures of the headlight bezels. They both need cleaned/ polished but I just noticed one is bent along the edge-- see pictures 1 & 2. Thanks, Todd

I guess they are called Headlight Bezels

**Todd68Chevy** · 09-02-2010, 10:51 PM

Quote:

Originally Posted by bguild

No just the chrome trim that goes around the headlights.. Sorry for the confusion. YOu have a picture of them on page one.. I should have been more descriptive.

Quote:

Originally Posted by bguild

I guess they are called Headlight Bezels

No problem, I did sell the better one to Lolife but I think I still have the damaged one. I will be able to look for it this weekend. Thanks for your interest, Todd

**ScottH** · 03-23-2010, 11:34 AM

Todd, would u have a good taillight harness for a 68 fleetside?

thanks.

Scott

**Todd68Chevy** · 03-23-2010, 09:50 PM

Quote:

Originally Posted by ScottH

Todd, would u have a good taillight harness for a 68 fleetside?

thanks.

Scott

The two I have at this time have been spliced together. If I find a good one before you buy another one I will let you know. Thanks for asking. Todd

Quote:

Originally Posted by lolife99

Got any better pics of the headlight bezels? I need a nice set of 67-68 bezels.

Hey I just noticed that I did not have them listed in the pricing-- good eye--- I would take $15.00 each or $25.00 for the pair plus shipping. Thanks, Todd

Quote:

Originally Posted by MARIOS68PANEL

I`ll take the cig Lighter . shipped to 95673?? Pm me paypal info and how much.

Cig. lighter Sold, waiting on payment. Thanks, Todd

**Todd68Chevy** · 03-23-2010, 12:58 PM

ScottH, The truck these parts came off of did not have a bed on it and the wiring was not there but I have a couple other trucks that might have a good harness. I will check tonight. Thanks, Todd

**ScottH** · 03-23-2010, 01:20 PM

Thanks Todd

**lolife99** · 03-23-2010, 11:16 PM

I'll take the one good bezel for $15.00.
Let me know how you want to be paid.

**Todd68Chevy** · 03-24-2010, 06:10 AM

Quote:

Originally Posted by lolife99

I'll take the one good bezel for $15.00.
Let me know how you want to be paid.

PM sent. Thanks, Todd

**ScottH** · 03-24-2010, 10:45 AM

Todd, found a harness, just wanted to let u know.

Scott

**Todd68Chevy** · 03-24-2010, 09:58 PM

Quote:

Originally Posted by lolife99

I'll take the one good bezel for $15.00.
Let me know how you want to be paid.

One Headlight Bezel Sold, waiting on payment. Thanks, Todd

Quote:

Originally Posted by ScottH

Todd, found a harness, just wanted to let u know.

Scott

Good to hear, Thanks, Todd

**Todd68Chevy** · 03-27-2010, 06:11 AM

Still a lot of good parts left. ttt

**Todd68Chevy** · 03-30-2010, 05:25 PM

Choke delete and other good parts still availible. ttt

MARIOS68PANEL · 03-30-2010, 05:35 PM

got the parts yesterday . Thank you for getting them to me so quick.

**Todd68Chevy** · 04-03-2010, 08:15 AM

Happy Easter weekend. ttt

03-22-2010, 10:00 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More I parted out a 1968 C20 last weekend and here are some of the parts I am getting rid of. I have close up pictures of all parts but instead of cluttering the thread up with pictures of unwanted parts I will post pictures as asked. ---Respond to the thread as per rules and to keep the confusion down.--- 1. Choke Delete in good overall condition but the black paint is flaked/ cracked, The "GM" letters has some minor inperfections -- see pictures SOLD. 2. Dash cluster assy. in good shape and is made for the choke delete because it does not have the "choke" lettering on the right side. It was puled out of a nonrunning truck so true operation is unknown, circuit board looks good, I do not see any breaks/ cracks in the bezel but the outside silver trim is poor. I have more pictures if interested. SOLD 3. Vent doors including the arm and bracket, The doors have surface rust on the back side and need new seals but are solid and moved good before removing. $20.00 each or $35.00 for the pair plus shipping. 4. Jack items from inside the cab. 3 brackets, 2 springs and bolts, $10.00 plus shipping 5. Trim below the steering column at the instrument bezel. good used condition SOLD 6. Parking brake lever cover in good used condition but does have 2 holes in it--see pictures in post #4. SOLD 7. Speaker Bracket used condition with slight surface rust/ corrosion. $10.00 plus shipping 8. Ignition switch surround-- scuffed but usable, Free with other purchase or pay shipping only by itself 9. Cig. Lighter element, trim and socket, used, some corrotion SOLD. 10. Headlight switch knob and 2 retainer nuts, Used condition $5.00 plus shipping 11. Jack handle -- straight section is bent some $5.00 plus shipping 12. 68 Grille support- used, surface rust $10.00 plus shipping 13. Small Block Frame Stands- grease included $20.00 plus shipping for the pair 14. Grille bowtie emblem-- pitted and faded, studs good $5.00 plus shipping 15. Hood latch assy. - used condition, works good $10.00 plus shipping 16. Saftey Recall Frame Bracket with bolts $10.00 plus shipping 17. Automatic column shifter rod- used- SOLD 18. Automatic column shifter linkage frame pivot- used- SOLD 19. Door lock cylinders with arms and retainer clips-- no key-- $15.00 plus shipping for the pair 20. 2 Hub Caps from C20 16 inch wheels-- used - SOLD 21. Door Latch rods- from the inside handle pivot to the latch assy. with the end clips $5.00 for the pair plus shipping 22. Brace that goes around the steering rod across the inner fender. Solid but rusty-- Free with the purchase of something else or the shipping cost if wanted seperately. 23. Washer solvent tank bracket- surface rust $5.00 plus shipping I will accept PayPal or Money order and combine shipping when able. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 01-10-2011 at 07:43 AM. Reason: update items sold

03-22-2010, 10:05 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Here are a couple more pictures. The Choke Delete and the Cluster are being sold seperate. Please ask any questions you might have and if you want more pictures let me know, Thanks for looking, Todd Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-22-2010, 10:20 PM	#3
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Does the e brake cover have any rust, dents or extra holes? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-22-2010, 10:30 PM	#5
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Thanks for the pics. Im gonna have to pass on it though. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

03-22-2010, 10:32 PM	#6
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More No problem, Thanks for looking __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-22-2010, 10:29 PM	#4
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Wancosc356 here are a couple pictures of of the park brake cover. I can put my hands on it tomorrow and verify but I do not remember any big issues with it. In the second picture the 2 small holes seen in the picture might be extra. I will look better tomorrow. Thanks, Todd Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-22-2010, 11:02 PM	#7
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More I`ll take the cig Lighter . shipped to 95673?? Pm me paypal info and how much. __________________ 67 short step 71 Custom

03-23-2010, 07:36 AM	#10
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Got any better pics of the headlight bezels? I need a nice set of 67-68 bezels. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-23-2010, 11:34 AM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Todd, would u have a good taillight harness for a 68 fleetside? thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-23-2010, 12:58 PM	#16
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More ScottH, The truck these parts came off of did not have a bed on it and the wiring was not there but I have a couple other trucks that might have a good harness. I will check tonight. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-23-2010, 01:20 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Thanks Todd __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-23-2010, 11:16 PM	#18
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More I'll take the one good bezel for $15.00. Let me know how you want to be paid. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 03-23-2010 at 11:16 PM.

03-24-2010, 10:45 AM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Todd, found a harness, just wanted to let u know. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-27-2010, 06:11 AM	#22
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Still a lot of good parts left. ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

03-30-2010, 05:25 PM	#23
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Choke delete and other good parts still availible. ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.



Register or Log In To remove these advertisements.

03-30-2010, 05:35 PM	#24
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More got the parts yesterday . Thank you for getting them to me so quick. __________________ 67 short step 71 Custom

04-03-2010, 08:15 AM	#25
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1968 Chevy Parts incl. Choke Delete, Park Brake Cover & More Happy Easter weekend. ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

Register or Log In To remove these advertisements.