![]() |
|
![]() |
#1 |
Registered User
Join Date: Jun 2007
Location: Dayton, Ohio
Posts: 95
|
Trim new springs?
Do I need to trim the ear on my new front springs to properly seat the spring in the bottom and upper grooves? Has anyone had to do this? See picture below.
1970 C10, stock spring height, ECE replacements ![]() Last edited by frankdatank01; 03-28-2010 at 07:48 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: Trim new springs?
The spring should be right as it is. Your old spring has taken a set which affects the windup. This explains why the two won't match.
Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC |
![]() |
![]() |
![]() |
#3 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Trim new springs?
40+ years of flexing will cause the spring to begin to sag... the old springs were as high as your replacements back in the day.
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2007
Location: Dayton, Ohio
Posts: 95
|
Re: Trim new springs?
I'm going to give it a shot. I wasn't concerned on the height, just whether the spring will sit in the grooves properly since the new spring appears longer. When I test fit the bottom in properly, the top didn't feel right, but its hard to tell, there is not much of a "nub" up there where the spring sits, just the center circle. Thought I'd ask first.
Thanks for the responses. Frank Last edited by frankdatank01; 03-28-2010 at 08:32 PM. Reason: clarity |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2009
Location: DFW, TX
Posts: 764
|
Re: Trim new springs?
Any chance you could measure the height of those old stock springs and report the results in the thread linked below? Even better if you can measure the wire diameter too. I know you truck is a 70 but I think the springs were the same from 70 to 72.
Thanks in advance, Matt http://67-72chevytrucks.com/vboard/s...d.php?t=394251
__________________
72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400 Last edited by OhOneWS6; 03-28-2010 at 09:06 PM. |
![]() |
![]() |
![]() |
#6 |
Who needs sleep...
![]() Join Date: Aug 2009
Location: Middleburg, Florida
Posts: 260
|
Re: Trim new springs?
Bottom has a place to seat, to locate, top doesn't, it's the same all the way around on mine...
Trip |
![]() |
![]() |
![]() |
Bookmarks |
|
|