Stack...or not to stack - That is the question! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67_C-30 · 03-31-2010, 12:31 AM

Now that I've got off my big ol lazy butt and I got my dually running, I'm going to need an exhaust system. Truthfully, I really rather run it all the way over the axle, and out behind the wheels on the passenger. However, here's my dilemma: The diesel was to too wide with the turbo to go inside the frame. I'm going to have to run outside the passenger side frame rail. Since the leaf springs would be in the way, I can't easily go over axle. This leaves my options to either running it out in front the passenger rear wheel, or running a stack. When I think of stacks, my first thought is redneck, but they have really become popular with the diesel truck crowd. I'm undecided whether I like them or not. The exhaust exiting in front of the wheel would look and sound great, but people have told me that the diesel soot makes it impossible to keep the passenger side rear wheels and tires and bedside clean (especially the wheels). If I go stack, I'm pretty sure i'd want to keep it subtle (something like the pic below) . Maybe a satin black stack with an old school flapper, and not too high. I need help deciding! Give me your thoughts.

prostreetC-10 · 03-31-2010, 12:51 AM

NNNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Do I hear dueling banjos????? LOL

kgt · 03-31-2010, 01:07 AM

NOOOOOO.....stack....PLEASE!!!!...

Jacfourteen · 03-31-2010, 01:50 AM

I'd say no to the stack in the bed. I have another suggestion for you though. A guy on the 99-06 forum transplanted a cummins into his bodydropped and bagged regular cab, and to simplify the exhaust he is running a hood stack here is a link to the build (look about 2/3 of the way down the page, and I'm to tired to post the images). He cut the cowl then welded in a tube for the tip to run through, the tip will only extend about 3" above the cowl. Not sure if I like it or not, but it's an option......bet it would have a wicked turbo whistle to it though

72swb_327stroker_? · 03-31-2010, 02:08 AM

NO.. to stacks....its stacky

*vegaschevy* · 03-31-2010, 03:11 AM

It will be VERY loud!!

jdcole · 03-31-2010, 08:47 AM

This is the only custom truck that needs or deserves to be stacked..........

epashhans · 03-31-2010, 10:57 AM

I agree...no stacks. If it were a C50 or something, I would say you might be able to get away with some dual stacks. That might look good. But I would just run it down the passenger side and dump it in front of your inside dual but dump it slightly down, not out. I think with your duals on there you wouldn't have a problem of making a mess with your outside rim, just maybe your inside. Paint your truck flat black and no one will see the soot!

BAGNDRAGIT · 03-31-2010, 11:00 AM

i say go with hood stacks....they are sweet.

just my $0.02

67_C-30 · 04-01-2010, 12:17 AM

Quote:

Originally Posted by epashhans

I agree...no stacks. If it were a C50 or something, I would say you might be able to get away with some dual stacks. That might look good. But I would just run it down the passenger side and dump it in front of your inside dual but dump it slightly down, not out. I think with your duals on there you wouldn't have a problem of making a mess with your outside rim, just maybe your inside. Paint your truck flat black and no one will see the soot!

That's a good point I hadn't thought of. I really don't care too much about the inside wheel, but the thought of a black, sooty outside is what had me considering the stack in the first place.

72BlckButy · 03-31-2010, 02:33 PM

Nah... I'd have to say no to the stacks as well.

C20-67_N_MO · 03-31-2010, 02:45 PM

I agreee......

Stacks just do not looks good on these trucks at all.

prostreetC-10 · 03-31-2010, 04:04 PM

I just found out that it's illegal to have stacks in your state.....no really! The cops are saying no too!

68,69 K20 · 03-31-2010, 04:53 PM

Gotta vote no, everytime I see them in anything other than a semi they just look bad. Your truck is too cool to use stacks.

Trip59 · 03-31-2010, 05:30 PM

They look funny on these trucks IMO... how about something like lake pipes...

Trip

**Palf70Step** · 03-31-2010, 06:26 PM

A Flatbed, stacks are OK

Your bed.....NO...Run to the rear, or at lest out the side in from of the wheels.

69 longhorn · 03-31-2010, 08:10 PM

I guess that I am in the minority here,but ....I like staks. I have heard them run (redneck gas), made a sb Ford sound like a BB! if it were mine, I would do the stacks

crazyAL

tcb-1 · 03-31-2010, 10:03 PM

Quote:

Originally Posted by Palf70Step

A Flatbed, stacks are OK

Your bed.....NO...Run to the rear, or at lest out the side in from of the wheels.

no truer words spoken. agree 100%!!

ERASER5 · 03-31-2010, 11:23 PM

Just say NO to crack, I mean stack.

Dark Knight · 03-31-2010, 11:26 PM

I vote FOR the stacks. They would look really cool on your truck. It just has to be 2 chrome stacks with the curved tips. Turn them with the tips at a 45* angle from being straight back. But then again, I'm the guy that put a stack on a Jeep. lol.

culp7 · 03-31-2010, 11:28 PM

man i'd run stacks, it would be sweet to drive down the road blowin smoke!

1968CHEVYC10 · 03-31-2010, 11:37 PM

STACKS!!!! YES! what's everybody got against rednecks anyway?

dirtball · 04-01-2010, 12:03 AM

No to stacks on a light duty truck...

EVER!

RustenPaines · 04-01-2010, 12:11 AM

Bro, whatever floats your boat.

NORMSCOLORADO · 04-01-2010, 01:34 AM

im a stack fan myself and because your truck is HD and Diesel id do a simple 3-4" twin stack setup.... with slash cuts and dont go over the cab they look dumb when they stick above the cab.... and black stacks would be better less chrome to polish subtle and not too over the top....

:EDIT: here is what im talkin about.... i also brightened up the pic and leveled out the truck

03-31-2010, 12:31 AM	#1
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Stack...or not to stack - That is the question! Now that I've got off my big ol lazy butt and I got my dually running, I'm going to need an exhaust system. Truthfully, I really rather run it all the way over the axle, and out behind the wheels on the passenger. However, here's my dilemma: The diesel was to too wide with the turbo to go inside the frame. I'm going to have to run outside the passenger side frame rail. Since the leaf springs would be in the way, I can't easily go over axle. This leaves my options to either running it out in front the passenger rear wheel, or running a stack. When I think of stacks, my first thought is redneck, but they have really become popular with the diesel truck crowd. I'm undecided whether I like them or not. The exhaust exiting in front of the wheel would look and sound great, but people have told me that the diesel soot makes it impossible to keep the passenger side rear wheels and tires and bedside clean (especially the wheels). If I go stack, I'm pretty sure i'd want to keep it subtle (something like the pic below) . Maybe a satin black stack with an old school flapper, and not too high. I need help deciding! Give me your thoughts. Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

03-31-2010, 12:51 AM	#2
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Stack...or not to stack - That is the question! NNNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Do I hear dueling banjos????? LOL __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video! Last edited by prostreetC-10; 03-31-2010 at 12:52 AM.

03-31-2010, 01:07 AM	#3
kgt Registered User Join Date: Jul 2008 Location: Vancouver Posts: 147	Re: Stack...or not to stack - That is the question! NOOOOOO.....stack....PLEASE!!!!...

03-31-2010, 01:50 AM	#4
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: Stack...or not to stack - That is the question! I'd say no to the stack in the bed. I have another suggestion for you though. A guy on the 99-06 forum transplanted a cummins into his bodydropped and bagged regular cab, and to simplify the exhaust he is running a hood stack here is a link to the build (look about 2/3 of the way down the page, and I'm to tired to post the images). He cut the cowl then welded in a tube for the tip to run through, the tip will only extend about 3" above the cowl. Not sure if I like it or not, but it's an option......bet it would have a wicked turbo whistle to it though __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's Last edited by Jacfourteen; 03-31-2010 at 01:53 AM.

03-31-2010, 02:08 AM	#5
72swb_327stroker_? knuckle buster.. Join Date: Oct 2007 Location: Frisco Posts: 613	Re: Stack...or not to stack - That is the question! NO.. to stacks....its stacky __________________ _______________________________________________________________________________ Eric THIS SITE ROCKS!!! Check out my suburban on 20's with fresh paint! Click here to support the site Check out the Member Photo Gallery here StreetCruizin FAQ thread Site vendors list (scroll down to vendors in red) join the the smilies fight club

03-31-2010, 03:11 AM	#6
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Stack...or not to stack - That is the question! It will be VERY loud!!

03-31-2010, 08:47 AM	#7
jdcole Registered User Join Date: Feb 2009 Location: Canyon TX Posts: 63	Re: Stack...or not to stack - That is the question! This is the only custom truck that needs or deserves to be stacked.......... __________________ 1969 Chevy LWB 350 converting to short stepper My build thread

03-31-2010, 10:57 AM	#8
epashhans Registered User Join Date: Jul 2009 Location: MT Posts: 319	Re: Stack...or not to stack - That is the question! I agree...no stacks. If it were a C50 or something, I would say you might be able to get away with some dual stacks. That might look good. But I would just run it down the passenger side and dump it in front of your inside dual but dump it slightly down, not out. I think with your duals on there you wouldn't have a problem of making a mess with your outside rim, just maybe your inside. Paint your truck flat black and no one will see the soot! __________________ '67 C-10 Shorty - 454, 5spd, and speed holes!

03-31-2010, 11:00 AM	#9
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: Stack...or not to stack - That is the question! i say go with hood stacks....they are sweet. just my $0.02 __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

03-31-2010, 02:33 PM	#11
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Stack...or not to stack - That is the question! Nah... I'd have to say no to the stacks as well. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-31-2010, 02:45 PM	#12
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Stack...or not to stack - That is the question! I agreee...... Stacks just do not looks good on these trucks at all. __________________ Coming Soon: Project 1970 Country Truck

03-31-2010, 04:04 PM	#13
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Stack...or not to stack - That is the question! I just found out that it's illegal to have stacks in your state.....no really! The cops are saying no too! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

03-31-2010, 04:53 PM	#14
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Stack...or not to stack - That is the question! Gotta vote no, everytime I see them in anything other than a semi they just look bad. Your truck is too cool to use stacks. __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin Last edited by 68,69 K20; 04-01-2010 at 08:09 PM.

03-31-2010, 05:30 PM	#15
Trip59 Who needs sleep... Join Date: Aug 2009 Location: Middleburg, Florida Posts: 260	Re: Stack...or not to stack - That is the question! They look funny on these trucks IMO... how about something like lake pipes... Trip __________________ Trip 72 GMC 1/2T LWB Build and Project Blog: http://72.tripbauer.com/

03-31-2010, 06:26 PM	#16
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	Re: Stack...or not to stack - That is the question! A Flatbed, stacks are OK Your bed.....NO...Run to the rear, or at lest out the side in from of the wheels. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

03-31-2010, 08:10 PM	#17
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Re: Stack...or not to stack - That is the question! I guess that I am in the minority here,but ....I like staks. I have heard them run (redneck gas), made a sb Ford sound like a BB! if it were mine, I would do the stacks crazyAL __________________ http://community.webshots.com/user/hotrodhorn

03-31-2010, 11:23 PM	#19
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: Stack...or not to stack - That is the question! Just say NO to crack, I mean stack. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

03-31-2010, 11:26 PM	#20
Dark Knight Registered User Join Date: Dec 2008 Location: Pleak, Texas Posts: 420	Re: Stack...or not to stack - That is the question! I vote FOR the stacks. They would look really cool on your truck. It just has to be 2 chrome stacks with the curved tips. Turn them with the tips at a 45* angle from being straight back. But then again, I'm the guy that put a stack on a Jeep. lol. __________________ -1967 Chevrolet Fleetside LWB- 350 V8 w/thumpr cam, NV3500, 3.08 gears, A/C, PS -1983 Chevy Silverado C1500- 383 stroker, TH400 -1989 Chevy Silverado K1500 SWB- 5.3L swap, 700R4, 3.42 gears -And a '66 Ford Mustang- 200 I6, C4 trans, rust bucket "The only thing we have to fear is fear itself." -FDR (and maybe rust too) You've gotta be able to stop and steer before you can go fast!

03-31-2010, 11:28 PM	#21
culp7 HickTown Join Date: Apr 2009 Location: ANDOVER, Kansas Posts: 355	Re: Stack...or not to stack - That is the question! man i'd run stacks, it would be sweet to drive down the road blowin smoke! __________________ 1993 Ford Mustang Vert w/ 2.3 1969 Chevy C/10 w/350 1968 Chevy C-20 w/250 1976 Dodge Aspen W/ 225 2000 Toyota Tundra w/4.7 1987 Dodge Ram D-100 w/360 255/70-15 ___________ (oo)══╬══(oo) ‾‾‾‾‾‾‾‾‾‾‾

03-31-2010, 11:37 PM	#22
1968CHEVYC10 Registered User Join Date: Aug 2009 Location: Tomball, TX Posts: 578	Re: Stack...or not to stack - That is the question! STACKS!!!! YES! what's everybody got against rednecks anyway? __________________ '68 C10 LWB 6.2NA/NP833 3.73's

04-01-2010, 12:03 AM	#23
dirtball Registered User Join Date: May 2006 Location: Colorado Posts: 412	Re: Stack...or not to stack - That is the question! No to stacks on a light duty truck... EVER! __________________ Brett

04-01-2010, 12:11 AM	#24
RustenPaines Registered User Join Date: Sep 2008 Location: Portland, Oregon Posts: 286	Re: Stack...or not to stack - That is the question! Bro, whatever floats your boat.

04-01-2010, 01:34 AM	#25
NORMSCOLORADO Registered User Join Date: Oct 2008 Location: JAY, NY Posts: 176	Re: Stack...or not to stack - That is the question! im a stack fan myself and because your truck is HD and Diesel id do a simple 3-4" twin stack setup.... with slash cuts and dont go over the cab they look dumb when they stick above the cab.... and black stacks would be better less chrome to polish subtle and not too over the top.... :EDIT: here is what im talkin about.... i also brightened up the pic and leveled out the truck __________________ 04 Chevy Colorado Z71 4X4 76 Chevy C-10 Custom Deluxe (sold) 67 Chevy C-30 1 Ton 9' stepper 6.5 Turbo Diesel Last edited by NORMSCOLORADO; 04-01-2010 at 02:02 AM.

Register or Log In To remove these advertisements.