1963 GMC Instrument cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EVBuilder · 03-31-2010, 07:57 PM

I have a fairly plain instrument cluster that has been cobbled by PO. It was spray painted with rattle cans over top of some of the lights and there was a paint can top glued over the hole on the far left. I wonder what was supposed to be there? it looks like my truck came with three gauges. Water temp, speedometer, and fuel gauge. There is an after market tach on the far right but its a small one and isn't centered in the hole. The paint cap hole was hacked out for something at one time definitely not factory. There is also a light that was lower left that is broken out. What would that be? Is there a source for parts to put this back right or do start looking for a used one to replace it all together?

**aerotruk63** · 03-31-2010, 08:20 PM

Which one do you have?

EVBuilder · 03-31-2010, 08:25 PM

I think the top one but not sure. I would have to look at it again. I know it didn't have the outer two gauges.

**aerotruk63** · 03-31-2010, 08:32 PM

They were accessory gauges, if you had the basic instrument panel which is like the one on the top, it would have the black centered plastic unit with the speedometer, oil pressure and water temperature only. There is a similar instrument panel on the larger trucks with two plastic units, The dash below it is the Deluxe instrument panel.

EVBuilder · 03-31-2010, 08:35 PM

So are there parts available for these clusters? I would like to replace the light lenses that were painted over and replace the broken one. which reminds me... what is that light at lower left supposed to be?

**aerotruk63** · 03-31-2010, 08:40 PM

I sold my 64 GMC 960 before the winter and all my GMC literature went with it. Have you checked on http://www.6066gmcguy.org/

**aerotruk63** · 03-31-2010, 08:43 PM

I would simply look for a dash in better shape. There's a yard near my property in Markdale ON. Also check with http://www.oakdalegarage.com/

EVBuilder · 03-31-2010, 08:44 PM

Thanks I will check that out. I went and looked at your pictures that is an awesome truck.

**Matt's k5** · 03-31-2010, 08:46 PM

keep checking ebay youll get lucky the lower left is gen, lower right is turn signal top right is high beam top left is low oil pressure, 60-62 had problems with circut board they were redsigned with plastic to hold the contacts in and no the paint can lid is not factory i recently scored two working ones off of ebay now my gauges work these are not reproduced you will have to custom build your own if you cannot fix yours or find others, later matt

**aerotruk63** · 03-31-2010, 08:48 PM

Minakers
King St
Milford ON, K0K 2P0

Phone #: 613-476-4547

Key contact: Paul Minaker , Owner
Very good old yard used to be his grandfathers, buses full of old parts.

**aerotruk63** · 03-31-2010, 08:51 PM

Yeh yeh it's real nice till I have to wash it. You know how that goes.

EVBuilder · 03-31-2010, 08:52 PM

Thanks man I copied and pasted it so i can call some time and not be upset I lost it.

**aerotruk63** · 03-31-2010, 08:56 PM

These are scanned from the 64 GMC Accessories Book.
LINK

http://picasaweb.google.com/normanme...MCAccessories#

Sick5 · 03-31-2010, 09:06 PM

i have the extra one
its the bottom one

**aerotruk63** · 03-31-2010, 09:08 PM

www.billstruckshop.com/

EVBuilder · 03-31-2010, 09:14 PM

I copied them all. I love stuff like that. I try to find anything like that for cars I buy. It will be a great reference for swapmeets. Would most of that stuff be the same for 1963? Also would you know what the Ontario seatbelt law says about older vehicles like this that dont have them?

EVBuilder · 03-31-2010, 09:16 PM

At the bottom of what Sick5? forgive me for being slow but I am new to the forum.

Sick5 · 03-31-2010, 09:17 PM

lol sorry i have an extra dash..
looks like the bottom pick aero posted

Sick5 · 03-31-2010, 09:21 PM

LMAO thats what get for reading fast
i thought you were looking for a dash

**aerotruk63** · 03-31-2010, 09:33 PM

EVBuilder is your truck Canadian or American Built?

EVBuilder · 03-31-2010, 09:39 PM

Its American. It was built in Pontiac Michigan then shipped to Mississippi where it spent it's entire life until 7 years ago. when it taken to Michigan. I bought from a guy there and brought it over here a couple of weeks ago.

Sick5 that looks like a much better panel than mine. I see all the lenses are gone for the lights do you have those too or are they part of the actual cluster? What do you want for it?

**aerotruk63** · 03-31-2010, 09:41 PM

That panel in original form is silver with a black inset and chrome around the perimeter.

EVBuilder · 03-31-2010, 09:46 PM

aerotruk63 I went to that website you posted it looks like that guy has everything that LMC has but it's already in Canada. I ordered a gas tank filler hose from LMC and they called me the next day to tell me that the shipping was $47 for a $17 order. I told them to cancel it. I think it's a rip off for us to have to pay that much for stuff. Everything is already marked up 30% as it is that we buy here. Then to have to buy stuff and have it shipped here is crazy expensive. Did you know about that guy in Chattem that sells Eastwood stuff? He sells his stuff for the Eastwood price plus the exchange. ships same day too most of the time.

**aerotruk63** · 03-31-2010, 09:49 PM

Who would that be?

EVBuilder · 03-31-2010, 09:55 PM

I can not remember his name but I have a receipt for the last order I made out in the shop. I will have to look for it and PM you sometime. I don't think I will have trouble finding you. You are on nearly every thread that I am these days lol.

03-31-2010, 07:57 PM	#1
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	1963 GMC Instrument cluster I have a fairly plain instrument cluster that has been cobbled by PO. It was spray painted with rattle cans over top of some of the lights and there was a paint can top glued over the hole on the far left. I wonder what was supposed to be there? it looks like my truck came with three gauges. Water temp, speedometer, and fuel gauge. There is an after market tach on the far right but its a small one and isn't centered in the hole. The paint cap hole was hacked out for something at one time definitely not factory. There is also a light that was lower left that is broken out. What would that be? Is there a source for parts to put this back right or do start looking for a used one to replace it all together?

03-31-2010, 08:20 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster Which one do you have? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

03-31-2010, 08:25 PM	#3
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster I think the top one but not sure. I would have to look at it again. I know it didn't have the outer two gauges.

03-31-2010, 08:32 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster They were accessory gauges, if you had the basic instrument panel which is like the one on the top, it would have the black centered plastic unit with the speedometer, oil pressure and water temperature only. There is a similar instrument panel on the larger trucks with two plastic units, The dash below it is the Deluxe instrument panel. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

03-31-2010, 08:35 PM	#5
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster So are there parts available for these clusters? I would like to replace the light lenses that were painted over and replace the broken one. which reminds me... what is that light at lower left supposed to be?

03-31-2010, 08:40 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster I sold my 64 GMC 960 before the winter and all my GMC literature went with it. Have you checked on http://www.6066gmcguy.org/

03-31-2010, 08:43 PM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster I would simply look for a dash in better shape. There's a yard near my property in Markdale ON. Also check with http://www.oakdalegarage.com/

03-31-2010, 08:44 PM	#8
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster Thanks I will check that out. I went and looked at your pictures that is an awesome truck.

03-31-2010, 08:46 PM	#9
Matt's k5 BLAZER THIRTY!! Join Date: May 2007 Location: Utah Posts: 325	Re: 1963 GMC Instrument cluster keep checking ebay youll get lucky the lower left is gen, lower right is turn signal top right is high beam top left is low oil pressure, 60-62 had problems with circut board they were redsigned with plastic to hold the contacts in and no the paint can lid is not factory i recently scored two working ones off of ebay now my gauges work these are not reproduced you will have to custom build your own if you cannot fix yours or find others, later matt __________________ 49 chevy 5 window 20 year project (sold)😟 57 ford fairlane (dad's car never got to it before he passed away R.I.P I LOVE YOU DAD.) 62 GMC 305 V6 custom L/B 72 HIGHLANDER K5 BLAZER 2nd owner 71 K5 MAMMA'S RIDE! 63 GMC 4X4 305 V6 62 GMC SHORT BED SERVICE BODY V6 (STUMPY) 74 GMC CUSTOM 1500 L/B

03-31-2010, 08:48 PM	#10
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster Minakers King St Milford ON, K0K 2P0 Phone #: 613-476-4547 Key contact: Paul Minaker , Owner Very good old yard used to be his grandfathers, buses full of old parts.

03-31-2010, 08:51 PM	#11
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster Yeh yeh it's real nice till I have to wash it. You know how that goes.

03-31-2010, 08:52 PM	#12
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster Thanks man I copied and pasted it so i can call some time and not be upset I lost it.

03-31-2010, 08:56 PM	#13
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster These are scanned from the 64 GMC Accessories Book. LINK http://picasaweb.google.com/normanme...MCAccessories# __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 03-31-2010 at 08:56 PM.

03-31-2010, 09:06 PM	#14
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 1963 GMC Instrument cluster i have the extra one its the bottom one __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

03-31-2010, 09:08 PM	#15
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster www.billstruckshop.com/



Register or Log In To remove these advertisements.

03-31-2010, 09:14 PM	#16
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster I copied them all. I love stuff like that. I try to find anything like that for cars I buy. It will be a great reference for swapmeets. Would most of that stuff be the same for 1963? Also would you know what the Ontario seatbelt law says about older vehicles like this that dont have them?

03-31-2010, 09:16 PM	#17
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster At the bottom of what Sick5? forgive me for being slow but I am new to the forum.

03-31-2010, 09:17 PM	#18
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 1963 GMC Instrument cluster lol sorry i have an extra dash.. looks like the bottom pick aero posted __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

03-31-2010, 09:21 PM	#19
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: 1963 GMC Instrument cluster LMAO thats what get for reading fast i thought you were looking for a dash Attached Images __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148 Last edited by Sick5; 03-31-2010 at 09:35 PM.

03-31-2010, 09:33 PM	#20
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster EVBuilder is your truck Canadian or American Built?

03-31-2010, 09:39 PM	#21
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster Its American. It was built in Pontiac Michigan then shipped to Mississippi where it spent it's entire life until 7 years ago. when it taken to Michigan. I bought from a guy there and brought it over here a couple of weeks ago. Sick5 that looks like a much better panel than mine. I see all the lenses are gone for the lights do you have those too or are they part of the actual cluster? What do you want for it?

03-31-2010, 09:41 PM	#22
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster That panel in original form is silver with a black inset and chrome around the perimeter. Last edited by aerotruk63; 03-31-2010 at 09:41 PM.

03-31-2010, 09:46 PM	#23
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster aerotruk63 I went to that website you posted it looks like that guy has everything that LMC has but it's already in Canada. I ordered a gas tank filler hose from LMC and they called me the next day to tell me that the shipping was $47 for a $17 order. I told them to cancel it. I think it's a rip off for us to have to pay that much for stuff. Everything is already marked up 30% as it is that we buy here. Then to have to buy stuff and have it shipped here is crazy expensive. Did you know about that guy in Chattem that sells Eastwood stuff? He sells his stuff for the Eastwood price plus the exchange. ships same day too most of the time.

03-31-2010, 09:49 PM	#24
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 1963 GMC Instrument cluster Who would that be? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

03-31-2010, 09:55 PM	#25
EVBuilder Registered User Join Date: Mar 2010 Location: Ingersoll Ontario Posts: 271	Re: 1963 GMC Instrument cluster I can not remember his name but I have a receipt for the last order I made out in the shop. I will have to look for it and PM you sometime. I don't think I will have trouble finding you. You are on nearly every thread that I am these days lol.

Register or Log In To remove these advertisements.