I-6 TBI Idea... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sailed2japan · 03-31-2010, 11:44 PM

I had a thought about adapting a TBI from a later model truck to fit a 292. I know it could be done, but not sure what all would be involved. I just thought it would be a cool way to build a motor and be a little different. My other thought was that it would be esay to put a blow thru turbo on it. This is all arm-chair customizing, though and would like some input.

Vernski · 03-31-2010, 11:57 PM

Quote:

Originally Posted by sailed2japan

I had a thought about adapting a TBI from a later model truck to fit a 292. I know it could be done, but not sure what all would be involved. I just thought it would be a cool way to build a motor and be a little different. My other thought was that it would be esay to put a blow thru turbo on it. This is all arm-chair customizing, though and would like some input.

Hey Jonny there are lots of Ideas out there check out this thread on FI for inline 6's....Vernski

http://67-72chevytrucks.com/vboard/s...d.php?t=337554

DWright · 04-01-2010, 05:54 AM

some inspiration for ya'

**aerotruk63** · 04-01-2010, 06:09 AM

Very Cool!

jchav62 · 04-01-2010, 09:34 AM

My brother in law, who is a genius at electrical and fuel injection, has kicked around the idea of adapting the 'TPI' setup that comes on the 4.0 Jeep inlines sixes to a Chevy six. That would be cool to see...

sailed2japan · 04-01-2010, 05:15 PM

That is on bad ma-ma jammin I-6!

padresag · 04-01-2010, 09:26 PM

these are the links that I was telling you about on the phone,Jonnie
http://webrodder.com/article.php?AID=184&SID=60
http://webrodder.com/article.php?AID=185&SID=60
http://webrodder.com/article.php?AID=186&SID=60
http://webrodder.com/article.php?AID=187&SID=60
ron

sailed2japan · 04-02-2010, 12:05 AM

Now that is some in depth info. Hopefully I get to put it to good use.

**Captainfab** · 04-02-2010, 01:38 AM

Thanks for posting these links Ron. I really liked Doc's build on this '63......that was years ago. I've got all those mags somewhere. I've searched for the build articles online a couple of times without any luck.

Quote:

Originally Posted by padresag

these are the links that I was telling you about on the phone,Jonnie
http://webrodder.com/article.php?AID=184&SID=60
http://webrodder.com/article.php?AID=185&SID=60
http://webrodder.com/article.php?AID=186&SID=60
http://webrodder.com/article.php?AID=187&SID=60
ron

**Bugeyev8** · 04-02-2010, 02:03 AM

Check the Megasquirt site under installations, should be something there

MXmaniac · 04-03-2010, 01:13 AM

Quote:

Originally Posted by Bugeyev8

Check the Megasquirt site under installations, should be something there

+1 for the Megasquirt. The Formula SAE team I'm part of is using a Microsquirt ECU on our race car(turbocharged 250cc single-cylinder), and I know a couple guys that are using Megasquirts on I-6 Datsun 240Z cars. It's a very hands-on learn-as-you-go system designed for the do-it-yourselfer that wants to learn all about fuel injection.

http://www.diyautotune.com/

Edit, this is probably exactly what you're looking for!:
http://www.diyautotune.com/tech_arti...part1-nova.htm

jbon64 · 04-04-2010, 07:22 PM

http://www.affordable-fuel-injection...on=show_detail

if you have the dough maybe try this , looks like everything is there .

sshockr · 04-05-2010, 08:24 PM

The cool thing about the Megasquirt is they're self learning.

Heater63 · 04-06-2010, 12:15 AM

Jonny,

woogeroo is right, go to inliners.org there is a ton of knowledge and experience there.

be prepared to pay premium prices to build a 292, but if you do, it's definately cool and different. I'm building mine with stock but balanced bottom end, propane dish pistons, Schnieder hydraulic lifter cam, lump ports, bigger valves, Offy intake, 4 bbl carb, and HEI.

Woogeroo · 04-02-2010, 06:13 AM

http://www.inliners.org

-W

03-31-2010, 11:44 PM	#1
sailed2japan Jonny Join Date: Apr 2008 Location: Outside the Box, Austin,TX Posts: 741	I-6 TBI Idea... I had a thought about adapting a TBI from a later model truck to fit a 292. I know it could be done, but not sure what all would be involved. I just thought it would be a cool way to build a motor and be a little different. My other thought was that it would be esay to put a blow thru turbo on it. This is all arm-chair customizing, though and would like some input. __________________ 1966 C30, Cummins, stacks, and a flat bed in progress... "Honor.....simply put, A veteran - whether active duty, retired, national guard or reserve is someone who, at one time in his life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including his life.' That is Honor, and there are way too many people in this country who no longer understand it." -AEC Hundley USNR

04-01-2010, 05:54 AM	#3
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: I-6 TBI Idea... some inspiration for ya' Attached Images __________________ "If it ain't broke, hit it with a hammer, then fix it.."

04-01-2010, 06:09 AM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: I-6 TBI Idea... Very Cool! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-01-2010, 09:34 AM	#5
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: I-6 TBI Idea... My brother in law, who is a genius at electrical and fuel injection, has kicked around the idea of adapting the 'TPI' setup that comes on the 4.0 Jeep inlines sixes to a Chevy six. That would be cool to see... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-01-2010, 05:15 PM	#6
sailed2japan Jonny Join Date: Apr 2008 Location: Outside the Box, Austin,TX Posts: 741	Re: I-6 TBI Idea... That is on bad ma-ma jammin I-6! __________________ 1966 C30, Cummins, stacks, and a flat bed in progress... "Honor.....simply put, A veteran - whether active duty, retired, national guard or reserve is someone who, at one time in his life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including his life.' That is Honor, and there are way too many people in this country who no longer understand it." -AEC Hundley USNR

04-01-2010, 09:26 PM	#7
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: I-6 TBI Idea... these are the links that I was telling you about on the phone,Jonnie http://webrodder.com/article.php?AID=184&SID=60 http://webrodder.com/article.php?AID=185&SID=60 http://webrodder.com/article.php?AID=186&SID=60 http://webrodder.com/article.php?AID=187&SID=60 ron

04-02-2010, 12:05 AM	#8
sailed2japan Jonny Join Date: Apr 2008 Location: Outside the Box, Austin,TX Posts: 741	Re: I-6 TBI Idea... Now that is some in depth info. Hopefully I get to put it to good use. __________________ 1966 C30, Cummins, stacks, and a flat bed in progress... "Honor.....simply put, A veteran - whether active duty, retired, national guard or reserve is someone who, at one time in his life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including his life.' That is Honor, and there are way too many people in this country who no longer understand it." -AEC Hundley USNR

04-02-2010, 02:03 AM	#10
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: I-6 TBI Idea... Check the Megasquirt site under installations, should be something there

04-04-2010, 07:22 PM	#12
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: I-6 TBI Idea... http://www.affordable-fuel-injection...on=show_detail if you have the dough maybe try this , looks like everything is there . __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

04-05-2010, 08:24 PM	#13
sshockr Registered User Join Date: Oct 2009 Location: Wichita, KS Posts: 91	Re: I-6 TBI Idea... The cool thing about the Megasquirt is they're self learning. __________________ 1963 Long Bed C10 - LT1/4L60E Swap in Progress. Blew up the straight six and happened to have the engine trans combo on hand already. 1995 Impala SS - LT1/T56 Combo. This is my 1st priority project.

04-06-2010, 12:15 AM	#14
Heater63 Registered User Join Date: Dec 2007 Location: N Texas Posts: 580	Re: I-6 TBI Idea... Jonny, woogeroo is right, go to inliners.org there is a ton of knowledge and experience there. be prepared to pay premium prices to build a 292, but if you do, it's definately cool and different. I'm building mine with stock but balanced bottom end, propane dish pistons, Schnieder hydraulic lifter cam, lump ports, bigger valves, Offy intake, 4 bbl carb, and HEI. __________________ 292 + TKO500

04-02-2010, 06:13 AM	#15
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: I-6 TBI Idea... http://www.inliners.org -W



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.