Distributor question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kiwi · 04-02-2010, 02:55 AM

Anybody know what the initial and total advance timing specs were for a stock 350 4V V-8 fit to a 1971 Chevrolet C10 truck?

In addition, with regards to the stock cast-iron cylinder heads fit to a 1971 C10 with a 350 V-8 ...

1. What was the cc size of the combustion chambers (I think that it was 76 cc which yielded a lackluster 8.2:1 compression ratio)

2. What was the size of the intake runners on the cylinder heads (I'm guessing that it was somewhat near 180 cc's)

04-02-2010, 02:55 AM	#1
Kiwi Registered User Join Date: Mar 2010 Location: Los Angeles, California Posts: 81	Distributor question Anybody know what the initial and total advance timing specs were for a stock 350 4V V-8 fit to a 1971 Chevrolet C10 truck? In addition, with regards to the stock cast-iron cylinder heads fit to a 1971 C10 with a 350 V-8 ... 1. What was the cc size of the combustion chambers (I think that it was 76 cc which yielded a lackluster 8.2:1 compression ratio) 2. What was the size of the intake runners on the cylinder heads (I'm guessing that it was somewhat near 180 cc's)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.