TX swb bed and couple of cabs and other stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WILD WILLIE · 04-05-2010, 10:07 AM

Need to get ride of a few things.
swb fleetside bed has a hole in floor for gas fill and some dents no rust 400.00
67 gmc cab rockers are good but drivers side has a dent in rocker po cut trans tunnel non air 250.00
70 chevy cab had the rockers replaced high hump with two shifter holes also has a clutch pedel 150.00
set of 68 doors rust free but has dents 75.00 for the pair
swb frame with 5 lug rearend and have spindles and roters to swith front to 5 lug 350.00
70 up driver quality grille has two small dents in pass side 175.00
custom and 350 emblems in good shape 35.00
cell 940-733-8076 located 50 miles south of Wichita falls Texas

WILD WILLIE · 04-05-2010, 10:09 AM

more pics

WILD WILLIE · 04-05-2010, 10:12 AM

some more of them

**72K20** · 04-05-2010, 10:44 AM

PM sent.

JimmyFloyd · 04-05-2010, 10:46 AM

Man, I could use that 70 cab, but I don't have a clue how I would get it to NY.

m6z · 04-05-2010, 01:21 PM

Is the 67 GMC grill and headlight buckets for sale? If so how much and is it straight and rust free?

WILD WILLIE · 04-05-2010, 02:01 PM

yes its for sale its rust free but it has some bumps ill take 40.00 with the buckets.

67 ext cab · 04-05-2010, 04:38 PM

put me in line for the bed can you take a few more pics of the underside of the bed and floor

WILD WILLIE · 04-05-2010, 04:50 PM

I will get more pics tonight and post them tommorow of bed.

WILD WILLIE · 04-05-2010, 10:41 PM

ttt

WILD WILLIE · 04-06-2010, 09:47 AM

more pics

DBear · 04-06-2010, 10:52 AM

is the grill still for sale.

WILD WILLIE · 04-06-2010, 10:58 AM

yes its still for sale

JimmyFloyd · 04-06-2010, 10:58 AM

might be interested in the grill too if it can be shipped. I like that one much better than my 70 one.

WILD WILLIE · 04-06-2010, 11:05 AM

more pics of grille and extra tailgate that goes with the bed

WILD WILLIE · 04-06-2010, 02:20 PM

have a good floor section to repair floor of bed that comes with it

jbristo67 · 04-06-2010, 05:45 PM

I want the bed let me know if it falls to me

WILD WILLIE · 04-06-2010, 06:38 PM

If I dont here from 67 ext cab its yous can help load if needed

68lowburb · 04-06-2010, 07:35 PM

how far are you from dallas?

WILD WILLIE · 04-06-2010, 07:41 PM

northwest about 2 hours from denton

crr26@cox.net · 04-06-2010, 10:37 PM

could you post better pics of the doors , usual problem areas. and what about the extra bed floor and how much for just the bed floor

**Clyde65** · 04-07-2010, 11:38 AM

If you would be willing to sell the upper and lower a-arms, I would be interested in them, let me know please. I can pick them up this weekend.

WILD WILLIE · 04-07-2010, 05:34 PM

as far as the bed floor I have a good piece to repair the hole not the hole floor and I have a complete front frame with upper and lowers and manuel steeringbox I will take 35.00 for everthing.

**WIDESIDE72** · 04-08-2010, 08:28 PM

Put me in line for the bed if it gets to me. I guess I should be checking in more often.

WILD WILLIE · 04-08-2010, 09:55 PM

wide side who ever show up with the money first can have it . Also I lowered the price to 350.00 I found some rust in the floor at the from and the pass side inner whell well has some rust If you are still intrested come get it .

04-05-2010, 10:07 AM	#1
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	swb bed and couple of cabs and other stuff Need to get ride of a few things. swb fleetside bed has a hole in floor for gas fill and some dents no rust 400.00 67 gmc cab rockers are good but drivers side has a dent in rocker po cut trans tunnel non air 250.00 70 chevy cab had the rockers replaced high hump with two shifter holes also has a clutch pedel 150.00 set of 68 doors rust free but has dents 75.00 for the pair swb frame with 5 lug rearend and have spindles and roters to swith front to 5 lug 350.00 70 up driver quality grille has two small dents in pass side 175.00 custom and 350 emblems in good shape 35.00 cell 940-733-8076 located 50 miles south of Wichita falls Texas Attached Images

04-05-2010, 10:09 AM	#2
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff more pics Attached Images

04-05-2010, 10:12 AM	#3
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff some more of them Attached Images

04-05-2010, 10:44 AM	#4
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: swb bed and couple of cabs and other stuff PM sent.

04-05-2010, 10:46 AM	#5
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: swb bed and couple of cabs and other stuff Man, I could use that 70 cab, but I don't have a clue how I would get it to NY. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

04-05-2010, 01:21 PM	#6
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: swb bed and couple of cabs and other stuff Is the 67 GMC grill and headlight buckets for sale? If so how much and is it straight and rust free? __________________ Doug Looking for a 67-72 short bed driver.....

04-05-2010, 02:01 PM	#7
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff yes its for sale its rust free but it has some bumps ill take 40.00 with the buckets.

04-05-2010, 04:38 PM	#8
67 ext cab Registered User Join Date: Jan 2010 Location: cross lanes west virginia Posts: 52	Re: swb bed and couple of cabs and other stuff put me in line for the bed can you take a few more pics of the underside of the bed and floor

04-05-2010, 04:50 PM	#9
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff I will get more pics tonight and post them tommorow of bed. Last edited by WILD WILLIE; 04-05-2010 at 04:50 PM.

04-05-2010, 10:41 PM	#10
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff ttt

04-06-2010, 09:47 AM	#11
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff more pics Attached Images

04-06-2010, 10:52 AM	#12
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Re: swb bed and couple of cabs and other stuff is the grill still for sale.

04-06-2010, 10:58 AM	#13
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff yes its still for sale

04-06-2010, 11:05 AM	#15
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff more pics of grille and extra tailgate that goes with the bed Attached Images

04-06-2010, 02:20 PM	#16
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff have a good floor section to repair floor of bed that comes with it



Register or Log In To remove these advertisements.

04-06-2010, 05:45 PM	#17
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: swb bed and couple of cabs and other stuff I want the bed let me know if it falls to me __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

04-06-2010, 06:38 PM	#18
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff If I dont here from 67 ext cab its yous can help load if needed

04-06-2010, 07:35 PM	#19
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: swb bed and couple of cabs and other stuff how far are you from dallas?

04-06-2010, 07:41 PM	#20
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff northwest about 2 hours from denton

04-06-2010, 10:37 PM	#21
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: swb bed and couple of cabs and other stuff could you post better pics of the doors , usual problem areas. and what about the extra bed floor and how much for just the bed floor

04-07-2010, 11:38 AM	#22
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,549	Re: swb bed and couple of cabs and other stuff If you would be willing to sell the upper and lower a-arms, I would be interested in them, let me know please. I can pick them up this weekend. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-07-2010, 05:34 PM	#23
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff as far as the bed floor I have a good piece to repair the hole not the hole floor and I have a complete front frame with upper and lowers and manuel steeringbox I will take 35.00 for everthing.

04-08-2010, 08:28 PM	#24
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: swb bed and couple of cabs and other stuff Put me in line for the bed if it gets to me. I guess I should be checking in more often.

04-08-2010, 09:55 PM	#25
WILD WILLIE Registered User Join Date: Jun 2006 Location: OLNEY TEXAS Posts: 325	Re: swb bed and couple of cabs and other stuff wide side who ever show up with the money first can have it . Also I lowered the price to 350.00 I found some rust in the floor at the from and the pass side inner whell well has some rust If you are still intrested come get it .

Register or Log In To remove these advertisements.