airlift dominator 2600 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewdude92 · 04-21-2010, 01:38 PM

these have the 1/2" port. Is that just the size of the threaded hole? well what im asking is will i be able to use my 1/4" air hose still?

dznucks · 04-21-2010, 03:51 PM

you will more than likely have to use a reducer bushing and then use a fitting. I am not sure you can get a 1/4" hose to 1/2" NPT fitting. Fastenal doesnt show them on their site and they will usually carry it if its available.

If I recall the threads in the bags are 1/2" NPT. You may want to try going up to a 3/8" line. I have heard that most people arent happy with the fill speed of a 1/4" line.

http://www.fastenal.com/web/products...99961618&Nty=0

drewdude92 · 04-23-2010, 01:51 PM

thank you. im going to check at NAPA today I dont have to have he fancy just press in dealy mabobs either.

**michael bustamante** · 04-23-2010, 04:05 PM

I found 1/2 thread to 3/8 line locs at fastenall, but dont get the swivel heads, I went thru 3 of them before I found one that doesnt leak, if youwant the compression fitting ones I found those at home depot (brass)

drewdude92 · 04-26-2010, 01:34 PM

sweet thank you

04-21-2010, 01:38 PM	#1
drewdude92 72 chevys 4 life Join Date: Aug 2008 Location: Crescent,Ok Posts: 406	airlift dominator 2600 these have the 1/2" port. Is that just the size of the threaded hole? well what im asking is will i be able to use my 1/4" air hose still? __________________ I dont call it being young and dumb....I call it young and havin fun

04-21-2010, 03:51 PM	#2
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: airlift dominator 2600 you will more than likely have to use a reducer bushing and then use a fitting. I am not sure you can get a 1/4" hose to 1/2" NPT fitting. Fastenal doesnt show them on their site and they will usually carry it if its available. If I recall the threads in the bags are 1/2" NPT. You may want to try going up to a 3/8" line. I have heard that most people arent happy with the fill speed of a 1/4" line. http://www.fastenal.com/web/products...99961618&Nty=0 Last edited by dznucks; 04-21-2010 at 03:52 PM.

04-23-2010, 01:51 PM	#3
drewdude92 72 chevys 4 life Join Date: Aug 2008 Location: Crescent,Ok Posts: 406	Re: airlift dominator 2600 thank you. im going to check at NAPA today I dont have to have he fancy just press in dealy mabobs either. __________________ I dont call it being young and dumb....I call it young and havin fun

04-23-2010, 04:05 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: airlift dominator 2600 I found 1/2 thread to 3/8 line locs at fastenall, but dont get the swivel heads, I went thru 3 of them before I found one that doesnt leak, if youwant the compression fitting ones I found those at home depot (brass) __________________ 1967custom

04-26-2010, 01:34 PM	#5
drewdude92 72 chevys 4 life Join Date: Aug 2008 Location: Crescent,Ok Posts: 406	Re: airlift dominator 2600 sweet thank you __________________ I dont call it being young and dumb....I call it young and havin fun



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.