which plug wires which degree - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brans72 · 04-23-2010, 07:49 PM

I am up grading our 67 C10 to HEI and wanna know what plug wire boot degrees you guys recomm and why for a straight 6? Thanks in advance Brandon

Tx Firefighter · 04-24-2010, 07:16 AM

I just buy stock plug wires for an 80 model 4.1 pickup. That's a factory inline 6 with HEI application. Usually they come with 5 90 degree end wires and 1 straight end wire. The straight end wire is for cylinder number 1 so it clears the distributor cap easier.

Shyguy · 04-29-2010, 08:27 AM

Quote:

Originally Posted by Tx Firefighter

I just buy stock plug wires for an 80 model 4.1 pickup. That's a factory inline 6 with HEI application. Usually they come with 5 90 degree end wires and 1 straight end wire. The straight end wire is for cylinder number 1 so it clears the distributor cap easier.

That is one good looking I-6. I saved a picture of it so I can pattern my I-6 after it when I start working on the engine.

Thanks for sharing the picture and the info.

Danny

brans72 · 04-24-2010, 12:58 PM

Good info! I plan on ordering Skip White HEI unless you suggest another. I had a feeling you would chime in and Thank You. Brandon

Brad · 04-29-2010, 01:54 AM

I just make my own from wires out of the jy cut to the correct length and cleaned up. It really doesn't matter what angle is your dangle on the L6's since you don't have to clear headers.

04-23-2010, 07:49 PM	#1
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	which plug wires which degree I am up grading our 67 C10 to HEI and wanna know what plug wire boot degrees you guys recomm and why for a straight 6? Thanks in advance Brandon

04-24-2010, 07:16 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: which plug wires which degree I just buy stock plug wires for an 80 model 4.1 pickup. That's a factory inline 6 with HEI application. Usually they come with 5 90 degree end wires and 1 straight end wire. The straight end wire is for cylinder number 1 so it clears the distributor cap easier. __________________ I'm on the Instagram- @Gearhead_Kevin

04-24-2010, 12:58 PM	#4
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: which plug wires which degree Good info! I plan on ordering Skip White HEI unless you suggest another. I had a feeling you would chime in and Thank You. Brandon

04-29-2010, 01:54 AM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: which plug wires which degree I just make my own from wires out of the jy cut to the correct length and cleaned up. It really doesn't matter what angle is your dangle on the L6's since you don't have to clear headers. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.