disc brake swap

[made2drag]

i am changing from 67 drums up front to 73-87 drop spindles and disc brakes. i have the spindles and ball joints on and now i need to do the tie rods. i guess i use 73-87 outers and 67 inners? which tie rod adjusting sleeves? there are so many to pick from. what is the best combo?

[my67chevytruck]

call Jeff at Classic performance parts. I believe they have conversion tie rods.

Jeff 888-522-8303 ext 118

[made2drag]

thanks for the info!

[lolife99]

You need:
'73-'87 outers, and '67-70 outers (to use in the place of the inners so the threads will be opposite LH and RH),...

and some adjusting sleeves that have 11/16" threads on one end (the 73-87 tie rod end),... and 5/8" threads on the other end, (67-70 tie rod end).

Www.PerformaneOnLine.com sells the "conversion" adjusting sleeves.
This is how I know,... (my '69 disc brake swap)

[made2drag]

thanks lolife99, thats exactly what i was looking for. love your blz by the way.

[made2drag]

is that a cut lowering spring? looks really short. i have bags and i think that your lower control arm is sitting as low as my bag and drop spindle on a 29" tire

[made2drag]

could a 73-87 sleeve be welded to the 67 5/8 side? thanks for your help

[68 TT]

Originally Posted by made2drag

could a 73-87 sleeve be welded to the 67 5/8 side? thanks for your help

Not a wise idea to weld together steering components. Spend a few bucks and get the conversion sleeve so you know the piece won't come apart on you when you are driving down the road.

[lolife99]

Originally Posted by made2drag

is that a cut lowering spring? looks really short. i have bags and i think that your lower control arm is sitting as low as my bag and drop spindle on a 29" tire

I have 2.5" drop spindles and 3" (Summit brand) drop springs from Summit Racing.
They are actually Ground Force springs in a Summit Racing box.

[mclairmo]

Any Kragen/O'Reillys will have a good supply of flared brake tubing with the nuts on them. Just bend it yourself. If you need to, you can one end off, add a different size nut and re-flare it.

[made2drag]

thanks mclairmo, i will give that a try

[made2drag]

lolife99, that is one sweet blazer, it has the perfect stance

[ah_5500]

im about to be doing this to my 67 and thought id chime in to clear some stuff up im not sure about. can i use stock uppers with 73 87 ball joints? 73 87 lowers or can i use stock lowers with the 73 87 balljoints? thanks

[lolife99]

Originally Posted by ah_5500

im about to be doing this to my 67 and thought id chime in to clear some stuff up im not sure about. can i use stock uppers with 73 87 ball joints? 73 87 lowers or can i use stock lowers with the 73 87 balljoints? thanks

The 67-72 a-arms will work with the later 73-87 ball joints.
No need to swap the entire arm,... unless you just want to.

[ah_5500]

really. thats awesome. so bolt in 73 87 balljoints up top and press in 73 87 balljoints below? add in some 73 87 drop spindles and im set with exception of tie rod conversion and 73-87 master cylinder? thanks again. also is this what you did? (stock arms)

[lolife99]

Originally Posted by ah_5500

really. thats awesome. so bolt in 73 87 balljoints up top and press in 73 87 balljoints below? add in some 73 87 drop spindles and im set with exception of tie rod conversion and 73-87 master cylinder? thanks again. also is this what you did? (stock arms)

Actually my drop spindles are for 71-72 trucks. (Swap meet item for $100)

It's cheaper to just buy the drop spindles for the correct year of truck you are putting them on. Then there is no need to change balljoints OR tie rod ends.
I wish I would have done that. It would have been much cheaper in the long run. (just the tie rod adjusters are $50/pair)

[ah_5500]

but considerin my 67 has drums id have to do some swappin around as discussed right? also i couldnt find the adjusting sleeves, could you link them to me? the ones i found said nothing about converting. do i just tell them what i need when i call to order or are they on the site somewhere?

[ah_5500]

also should i get the spindles for 1 inch rotors or 1.25 inch

[Deaol]

Originally Posted by ah_5500

also should i get the spindles for 1 inch rotors or 1.25 inch

im running 1 1/4 6lug rotors from cpp using 73-87 setup

[lolife99]

Originally Posted by ah_5500

but considerin my 67 has drums id have to do some swappin around as discussed right? also i couldnt find the adjusting sleeves, could you link them to me? the ones i found said nothing about converting. do i just tell them what i need when i call to order or are they on the site somewhere?

Here's the ones from POL.
http://www.performanceonline.com/sto...cat=787&page=1

Part #HPAS6370

[ah_5500]

thanks fellas. i think im about to order some 3 inch spindles for the 1.25 rotors right now. probably the adjusting sleeves too. ill get the balljoints, calipers, and rotors local.