Motor mounts for Big block 65 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zus1 · 05-02-2010, 02:42 AM

Where can I find motor mounts for this application. I have read that it will be easier to move the engine forward.

markeb01 · 05-02-2010, 01:13 PM

The following threads should prove helpful:

http://67-72chevytrucks.com/vboard/s...g+block+mounts
http://67-72chevytrucks.com/vboard/s...light=bbc+swap

pctahlequah · 05-02-2010, 01:17 PM

I used a set of 67-71 BBC mounts I got on Ebay. They bolt in the factory location on our trucks. But a BBC is too close to the firewall there.
I've seen guys rework the firewall for for clearance, but on mine I moved the mounts about 3 inches forward to gain clearance for the valve covers and distributor.

protrash64 · 05-02-2010, 01:52 PM

I used 73+ 1/2 ton mounts which center the engine between to the 2 factory positions. I ran stock valve covers and they fit with NO firewall hacking. Front clearance is a little tighter but workable.....2 header options depending on your clearance needs. Mine is running and driving, too. Check link in my sig.

Zus1 · 05-02-2010, 03:42 PM

Thanks alot guys. I read up on them and I'm sure i will have a few more questions like the headers. I want it to be as easy as possible. I think the electric fan should help with front clearance. HOPEFULLY!

steverino66 · 05-02-2010, 09:01 PM

Quote:

Originally Posted by Zus1

Thanks alot guys. I read up on them and I'm sure i will have a few more questions like the headers. I want it to be as easy as possible. I think the electric fan should help with front clearance. HOPEFULLY!

My 454 is mounted on the forward frame holes with HEI dizzy, I used 71 towers/mounts/headers, plenty of frame clearance; short water pump gives plenty of front clearance with a fan. I did have to use a Groves components power steering pump mount.
I've heard 73-87 mounts/headers work well also.

**Captainfab** · 05-03-2010, 12:02 AM

The '73-'87 C20 frame brackets fit these older frames better than the C10 versions. On my Suburban I made my own frame brackets that moved the engine forward about 2 inches since I wanted to run my M/T valve covers. I used the '73-'87 headers also.

protrash64 · 05-03-2010, 06:46 PM

Here ya go.......perches, frame brackets, sometimes also called motor mounts..... they stradle the frame to the crossmember and the rubber bolts to the perch. These are 73+ 1/2 tons.

markeb01 · 05-04-2010, 12:22 PM

Here's the best thread available regarding disc brake parts options:

http://67-72chevytrucks.com/vboard/s...d.php?t=367260

05-02-2010, 02:42 AM	#1
Zus1 Registered User Join Date: Apr 2010 Location: Marietta, GA. Posts: 4	Motor mounts for Big block 65 c10 Where can I find motor mounts for this application. I have read that it will be easier to move the engine forward.

05-02-2010, 01:13 PM	#2
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Motor mounts for Big block 65 c10 The following threads should prove helpful: http://67-72chevytrucks.com/vboard/s...g+block+mounts http://67-72chevytrucks.com/vboard/s...light=bbc+swap __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 Last edited by markeb01; 05-02-2010 at 01:15 PM.

05-02-2010, 01:17 PM	#3
pctahlequah Registered User Join Date: Mar 2009 Location: Tahlequah, OK Posts: 31	Re: Motor mounts for Big block 65 c10 I used a set of 67-71 BBC mounts I got on Ebay. They bolt in the factory location on our trucks. But a BBC is too close to the firewall there. I've seen guys rework the firewall for for clearance, but on mine I moved the mounts about 3 inches forward to gain clearance for the valve covers and distributor. __________________ '66 C20 converted to C10, 454/TH400 '66 C10 saved from crusher

05-02-2010, 01:52 PM	#4
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Motor mounts for Big block 65 c10 I used 73+ 1/2 ton mounts which center the engine between to the 2 factory positions. I ran stock valve covers and they fit with NO firewall hacking. Front clearance is a little tighter but workable.....2 header options depending on your clearance needs. Mine is running and driving, too. Check link in my sig. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-02-2010, 03:42 PM	#5
Zus1 Registered User Join Date: Apr 2010 Location: Marietta, GA. Posts: 4	Re: Motor mounts for Big block 65 c10 Thanks alot guys. I read up on them and I'm sure i will have a few more questions like the headers. I want it to be as easy as possible. I think the electric fan should help with front clearance. HOPEFULLY!

05-03-2010, 12:02 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Motor mounts for Big block 65 c10 The '73-'87 C20 frame brackets fit these older frames better than the C10 versions. On my Suburban I made my own frame brackets that moved the engine forward about 2 inches since I wanted to run my M/T valve covers. I used the '73-'87 headers also. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-03-2010, 06:46 PM	#8
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Motor mounts for Big block 65 c10 Here ya go.......perches, frame brackets, sometimes also called motor mounts..... they stradle the frame to the crossmember and the rubber bolts to the perch. These are 73+ 1/2 tons. Attached Images __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-04-2010, 12:22 PM	#9
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Motor mounts for Big block 65 c10 Here's the best thread available regarding disc brake parts options: http://67-72chevytrucks.com/vboard/s...d.php?t=367260 __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.