67-69 chevy 6 cyl power steering worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joemomma1 · 05-04-2010, 02:44 AM

I have the chance but dont know if I should pick it up. Is there any interest for this part?

bestchevyfan · 05-04-2010, 05:59 AM

Hi, if you do i would like first chance to buy it .let me know. Thanks,buddy

**NC67Chev** · 05-04-2010, 11:54 AM

It depends on the "completeness" of the set-up, but they definitely have value. I've seen them sell from $75 to $250. The more "complete," meaning brackets, ps pump, water pump pulley, alternator pulley (if a double one is required), harmonic balancer, etc.

There are various configurations between cars and trucks. I've pulled two set-up off of Nova's (one a 72 & one a 74). One with A/C and one without. They were different and thus required different things to make them line up correctly.

If the seller knows anything regarding the value/demand, they will insist in selling all pulleys and brackets as a unit. If I were buying, that's the only way I would touch it. Just my 2 cents.

PanelDeland · 05-04-2010, 02:42 PM

^NC is absolutely right!^

Joemomma1 · 05-04-2010, 07:44 PM

I went and took a better look but I doubt its stock stuff.

**NC67Chev** · 05-04-2010, 08:05 PM

I'm not sure what that is from, but I'm sure somebody else will. Is that a "63" written on the manifold? Is that maybe a clue, hmmm.....I wouldn't pick that up if it were me, but I'm picky.

Joemomma1 · 05-04-2010, 08:18 PM

Can this set up be used? From a 77 chevy C10.

**NC67Chev** · 05-04-2010, 08:33 PM

nope. The set-ups that are so sought after are from '75 and older. The heads were changed starting in '76.

Mister laugh · 05-04-2010, 09:33 PM

Those pictures don't look like an integrated head to me. I think that is a good setup. I have been wrong before and I'm no expert but i dont think that is integrated head.

Joemomma1 · 05-04-2010, 11:46 PM

The truck is originally a diesel but has been changed so the 6 can be from anything. Is there a way to check?

Mister laugh · 05-05-2010, 12:08 AM

Quote:

Originally Posted by Joemomma1

The truck is originally a diesel but has been changed so the 6 can be from anything. Is there a way to check?

After a little bit of googling that is not an integrated head engine, the powersteering setup should work for you. Some of those pulleys dont look original to me though, so make sure you grab them ALL to make sure it works for you.

Jbesotes · 05-05-2010, 01:31 AM

That '77 Chevy pump should work the power steering pumps work all the way up '80. I have a pump on mine that was off of a '75 Chevy. and it works great! It works almost too good with my stock steering wheel. The pullies that are on the fan in the picture will work but they have a serpentine belt setup on them, which doesnt make a difference it just wont be used.

Also if that chrome valve cover says Chevrolet on it and if it is in good shape I would grab it too they run from $90- $160 from what I have seen.

Hope this helpes you get the power steering working.

**NC67Chev** · 05-05-2010, 08:32 AM

I don't think I was very clear in my reply. The pump isn't what I was focusing on. The pump might work fine, but the pumps are also readily available for not much. The brackets are the issue, which I don't think are correct for a non-integrated head. The brackets are where the value of the set-up comes into play. Maybe somebody rigged it up to work, I don't know. If you can bolt it back up, then maybe you should buy it if it's cheap. However, if you can't bolt it back up, then I wouldn't. Here is a picture showing what the saddle portion of the correct brackets looks like:

05-04-2010, 02:44 AM	#1
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 813	67-69 chevy 6 cyl power steering worth? I have the chance but dont know if I should pick it up. Is there any interest for this part?

05-04-2010, 05:59 AM	#2
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 67-69 chevy 6 cyl power steering worth? Hi, if you do i would like first chance to buy it .let me know. Thanks,buddy

05-04-2010, 11:54 AM	#3
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 67-69 chevy 6 cyl power steering worth? It depends on the "completeness" of the set-up, but they definitely have value. I've seen them sell from $75 to $250. The more "complete," meaning brackets, ps pump, water pump pulley, alternator pulley (if a double one is required), harmonic balancer, etc. There are various configurations between cars and trucks. I've pulled two set-up off of Nova's (one a 72 & one a 74). One with A/C and one without. They were different and thus required different things to make them line up correctly. If the seller knows anything regarding the value/demand, they will insist in selling all pulleys and brackets as a unit. If I were buying, that's the only way I would touch it. Just my 2 cents. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

05-04-2010, 02:42 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 67-69 chevy 6 cyl power steering worth? ^NC is absolutely right!^ __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

05-04-2010, 07:44 PM	#5
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 813	Re: 67-69 chevy 6 cyl power steering worth? I went and took a better look but I doubt its stock stuff.

05-04-2010, 08:05 PM	#6
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 67-69 chevy 6 cyl power steering worth? I'm not sure what that is from, but I'm sure somebody else will. Is that a "63" written on the manifold? Is that maybe a clue, hmmm.....I wouldn't pick that up if it were me, but I'm picky. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

05-04-2010, 08:18 PM	#7
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 813	Re: 67-69 chevy 6 cyl power steering worth? Can this set up be used? From a 77 chevy C10.

05-04-2010, 08:33 PM	#8
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 67-69 chevy 6 cyl power steering worth? nope. The set-ups that are so sought after are from '75 and older. The heads were changed starting in '76. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

05-04-2010, 09:33 PM	#9
Mister laugh Registered User Join Date: Jun 2007 Location: Edmonton, Alberta Posts: 423	Re: 67-69 chevy 6 cyl power steering worth? Those pictures don't look like an integrated head to me. I think that is a good setup. I have been wrong before and I'm no expert but i dont think that is integrated head.

05-04-2010, 11:46 PM	#10
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 813	Re: 67-69 chevy 6 cyl power steering worth? The truck is originally a diesel but has been changed so the 6 can be from anything. Is there a way to check?

05-05-2010, 01:31 AM	#12
Jbesotes Registered User Join Date: Feb 2010 Location: Lincoln, Ca Posts: 38	Re: 67-69 chevy 6 cyl power steering worth? That '77 Chevy pump should work the power steering pumps work all the way up '80. I have a pump on mine that was off of a '75 Chevy. and it works great! It works almost too good with my stock steering wheel. The pullies that are on the fan in the picture will work but they have a serpentine belt setup on them, which doesnt make a difference it just wont be used. Also if that chrome valve cover says Chevrolet on it and if it is in good shape I would grab it too they run from $90- $160 from what I have seen. Hope this helpes you get the power steering working. __________________ '70 Chevy Shorty I support our troops!! Thank You to all that have served!!

05-05-2010, 08:32 AM	#13
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 67-69 chevy 6 cyl power steering worth? I don't think I was very clear in my reply. The pump isn't what I was focusing on. The pump might work fine, but the pumps are also readily available for not much. The brackets are the issue, which I don't think are correct for a non-integrated head. The brackets are where the value of the set-up comes into play. Maybe somebody rigged it up to work, I don't know. If you can bolt it back up, then maybe you should buy it if it's cheap. However, if you can't bolt it back up, then I wouldn't. Here is a picture showing what the saddle portion of the correct brackets looks like: Attached Images __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar Last edited by NC67Chev; 05-05-2010 at 08:33 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.