I need some photographic help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 05-14-2010, 11:07 PM

As some of you might know, I'm retro-fitting the entire harness and TBI set-up into my crew cab from a '89 'burb. I am trying to figure out all the routing and some of the wiring. The PO of the 'burb cut the ends off of some of the wiring, including ground lugs and the alternator plug and eyelet. I could use some under hood shots of the wire routing (89-91 Blazer, 'burb or crew) as well as the wires running to the alternator and the power junction block located on the firewall above the brake booster.
thanks in advance guys (and/or gals

)

justpball · 05-15-2010, 11:28 AM

see if any of this helps, I have alot of extra stuff because of the airride but here are some pics

joe231 · 05-15-2010, 12:58 PM

Cool
thanks!
Where does the heavy wire in loom coming off of the back of the alternator go?
And what color are the 2 wires that plug into the alternator?

justpball · 05-15-2010, 01:50 PM

heavy gauge goes to the battery and the two small gauge are black and red with black stripe

joe231 · 05-15-2010, 02:27 PM

Cool
thanks!!!!

joe231 · 05-15-2010, 07:10 PM

What year are the pics from?

justpball · 05-15-2010, 10:38 PM

1990 burb

joe231 · 05-16-2010, 12:12 PM

I was just wonder because your colors don't match anything I have or the diagrams i have.....

*Stitch* · 05-16-2010, 12:41 PM

my crewcab is an 87 and it had TBI in it...give me a few and I'll go take some pics of the harness for ya...it's still in the truck...

edit: went outside to the truck and the wires were cut to the alternator...also, there was one large red wire w/ ring terminal and one smaller wire with a two hole ring terminal on it going to the junction box...

in the first picture you can see those two wires on a harness I have from a burb...dont' know what year though...

also, the second picture is of the wires that are coming out of the burb harness where the alternator would have been...the wire colors are from left to right...blue, red, purple, black/yellow stripe, yellow...

hope this helps...

joe231 · 05-16-2010, 01:20 PM

Thanks Chuck!
I hate all the cut happy people!!

*Stitch* · 05-16-2010, 03:29 PM

did that help you any...I also need to know where these last wires goto...I know where the big gauge red wire goes of course, but the others I'm not too sure...

motornut · 05-18-2010, 11:58 AM

duno if it helps but here is pics of 85/89 subs one of 89 more plus diagrams

motornut · 05-18-2010, 12:02 PM

does this help?

joe231 · 05-22-2010, 11:12 PM

sorry guys, i've been up to my eyeballs trying to get my crew on the road....

Quote:

Originally Posted by Fat Hoe

did that help you any...I also need to know where these last wires goto...I know where the big gauge red wire goes of course, but the others I'm not too sure...

the black and white is ground, the only larger purple I know of goes to the starter solenoid, the blue I'm not sure of, does it have a stripe?....and the last wire, is it white or tan? does it have a stripe?

Quote:

Originally Posted by motornut

does this help?

in the last pic can you tell me the colors of the wires going to the alternator?
those diagrams look nice, but I can't read them...

Justpball,

can you tell me what the wires go to that I highlighted in your pic?
Name: 6aafa732 highlighted.jpg
Views: 151
Size: 65.8 KB

Name: 6aafa732 highlighted.jpg
Views: 151
Size: 65.8 KB

justpball · 05-24-2010, 01:41 PM

yea that wire goes to the back of the alt, it is the 2nd wire on the hot side.this one

joe231 · 05-24-2010, 10:27 PM

Ok
cool
thanks!
I think I have it sorted out.

Chuck, I think I figured out where that blue wire goes..... ESC module to the knock sensor.

05-14-2010, 11:07 PM	#1
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	I need some photographic help As some of you might know, I'm retro-fitting the entire harness and TBI set-up into my crew cab from a '89 'burb. I am trying to figure out all the routing and some of the wiring. The PO of the 'burb cut the ends off of some of the wiring, including ground lugs and the alternator plug and eyelet. I could use some under hood shots of the wire routing (89-91 Blazer, 'burb or crew) as well as the wires running to the alternator and the power junction block located on the firewall above the brake booster. thanks in advance guys (and/or gals ) __________________ *CHEVY ONLY*

05-15-2010, 11:28 AM	#2
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: I need some photographic help see if any of this helps, I have alot of extra stuff because of the airride but here are some pics __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

05-15-2010, 12:58 PM	#3
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I need some photographic help Cool thanks! Where does the heavy wire in loom coming off of the back of the alternator go? And what color are the 2 wires that plug into the alternator? __________________ *CHEVY ONLY*

05-15-2010, 01:50 PM	#4
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: I need some photographic help heavy gauge goes to the battery and the two small gauge are black and red with black stripe __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 05-15-2010 at 01:53 PM.

05-15-2010, 02:27 PM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I need some photographic help Cool thanks!!!! __________________ *CHEVY ONLY*

05-15-2010, 07:10 PM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I need some photographic help What year are the pics from? __________________ *CHEVY ONLY*

05-15-2010, 10:38 PM	#7
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: I need some photographic help 1990 burb __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

05-16-2010, 12:12 PM	#8
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I need some photographic help I was just wonder because your colors don't match anything I have or the diagrams i have..... __________________ *CHEVY ONLY*

05-16-2010, 12:41 PM	#9
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: I need some photographic help my crewcab is an 87 and it had TBI in it...give me a few and I'll go take some pics of the harness for ya...it's still in the truck... edit: went outside to the truck and the wires were cut to the alternator...also, there was one large red wire w/ ring terminal and one smaller wire with a two hole ring terminal on it going to the junction box... in the first picture you can see those two wires on a harness I have from a burb...dont' know what year though... also, the second picture is of the wires that are coming out of the burb harness where the alternator would have been...the wire colors are from left to right...blue, red, purple, black/yellow stripe, yellow... hope this helps... Attached Images Last edited by Stitch; 05-16-2010 at 12:59 PM.

05-16-2010, 01:20 PM	#10
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I need some photographic help Thanks Chuck! I hate all the cut happy people!! __________________ *CHEVY ONLY*

05-16-2010, 03:29 PM	#11
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: I need some photographic help did that help you any...I also need to know where these last wires goto...I know where the big gauge red wire goes of course, but the others I'm not too sure...

05-18-2010, 11:58 AM	#12
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: I need some photographic help duno if it helps but here is pics of 85/89 subs one of 89 more plus diagrams Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

05-18-2010, 12:02 PM	#13
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: I need some photographic help does this help? Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 05-18-2010 at 12:11 PM.

05-24-2010, 01:41 PM	#15
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: I need some photographic help yea that wire goes to the back of the alt, it is the 2nd wire on the hot side.this one __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055 Last edited by justpball; 05-24-2010 at 01:48 PM.

05-24-2010, 10:27 PM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I need some photographic help Ok cool thanks! I think I have it sorted out. Chuck, I think I figured out where that blue wire goes..... ESC module to the knock sensor. __________________ *CHEVY ONLY* Last edited by joe231; 05-24-2010 at 10:46 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.