Looking for air bag setups....

[72gmcshorty]

I would like to see pics of how you mounted your air bag stuff (tanks, valves, hoses) on the blazer frames...

[chevyblazer]

hi dont have pictures now but in the front its easy just put the cups that bolt the bags no welding necesary in the back dependin if ti has springs just take the spirng off and make brackets to bolt ari bas ñeaf springs you can put tha bag like they sellem to you whit brackets that bolt on the leaf and the chasis mine has 3 link in the back and the bags go on top of the rear end mine haves manual valves like and crompresor goes on the motor it haves a ford air compresor they work great if you dont wanna put an electric let me take picture of mine later in the week

[72gmcshorty]

I am more interested in where the tanks have been mounted and plumbed, location of compressor and even how the wiring was run...

[chevyblazer]

ok a dont have pictures yet my tank is the back behind the seat and the compressor goes on top of the motor my is where ac compresor goes originily on a 98 vortec engine

[hotrodhomi]

I wasn't able to find a good place for the tanks under the blazer. I ended up putting them behind the rear wheel wells and I had a custom cover made for them.

[chevyblazer]

these are the only pictures y had may be thell help whaw your looking for here it has a co2 tank but now it has air thank

[72gmcshorty]

Thant thing is sure to be loud and low....

[chevyblazer]

yeah when y lowerd it its lowsy planing on putting nitro but the regulator is to expensive
when y crouse with it y like to get it down and upo rigt now the rear doesnt go down that fast because of the weight but with more psi hope that it does have any pictures of your ride

[chevyblazer]

compressor set up