5 on 5 to 5 on 4 3/4 how to???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy2racr · 02-12-2003, 10:42 PM

ok, I can have the axels welded and redrilled, how about fronts? and if I have the rears redrilled does anyone know of a brake drum that would fit the stock brakes and not be finned? cause the fins hit oneset of wheels I could run.. thanks
Bryce

eraser87 · 02-13-2003, 01:16 AM

i used drums off of a 1965 chev belair car , they were the same depth and size just no fins .....

eraser87 · 02-13-2003, 01:18 AM

you can have the fronts redrilled too , thats what we did... you have to machine down the center cone of rhe drum too .

Longhorn Man · 02-13-2003, 01:19 AM

Wouldn't a 1965 chev belair have the 5 on 5 though? I thought all the full size cars had the big bolt pattern.

eraser87 · 02-13-2003, 01:32 AM

nope it is 5 on 43/4

chevy2racr · 02-15-2003, 08:24 PM

there isn't a rotor that will bolt on thats 5 on 4 3/4? I thought I heard some van was

eraser87 · 02-17-2003, 01:26 AM

not sure ,i just redrilled mine

02-12-2003, 10:42 PM	#1
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	5 on 5 to 5 on 4 3/4 how to???? ok, I can have the axels welded and redrilled, how about fronts? and if I have the rears redrilled does anyone know of a brake drum that would fit the stock brakes and not be finned? cause the fins hit oneset of wheels I could run.. thanks Bryce __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

02-13-2003, 01:16 AM	#2
eraser87 Truck Fanatic Join Date: Sep 2002 Location: Kelowna, BC, Canada Posts: 62	drums i used drums off of a 1965 chev belair car , they were the same depth and size just no fins .....

02-15-2003, 08:24 PM	#6
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	there isn't a rotor that will bolt on thats 5 on 4 3/4? I thought I heard some van was __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

02-17-2003, 01:26 AM	#7
eraser87 Truck Fanatic Join Date: Sep 2002 Location: Kelowna, BC, Canada Posts: 62	roters not sure ,i just redrilled mine

02-13-2003, 01:18 AM	#3
eraser87 Truck Fanatic Join Date: Sep 2002 Location: Kelowna, BC, Canada Posts: 62	you can have the fronts redrilled too , thats what we did... you have to machine down the center cone of rhe drum too .

02-13-2003, 01:19 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Wouldn't a 1965 chev belair have the 5 on 5 though? I thought all the full size cars had the big bolt pattern.

02-13-2003, 01:32 AM	#5
eraser87 Truck Fanatic Join Date: Sep 2002 Location: Kelowna, BC, Canada Posts: 62	nope it is 5 on 43/4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.