? How many are running ram horns? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matt67350 · 02-13-2003, 07:19 PM

How many are running ram horns?

67cst · 02-13-2003, 07:24 PM

me

greasemonkey · 02-13-2003, 07:35 PM

me2

GreenMystChevy · 02-13-2003, 07:40 PM

me3

WORNBRAKES · 02-13-2003, 07:41 PM

I am on the 68 and headers on the 69

mtdave2 · 02-13-2003, 08:00 PM

me, i like em,

72MARIO · 02-13-2003, 08:04 PM

Thinking of using the horns Headder smight sound nice.

Project1970 · 02-13-2003, 08:18 PM

I am, but namely because I can't afford to go with headers yet.

MandarinSixSeven · 02-13-2003, 08:32 PM

im with Project1970 on that one, cant afford anything else

Jackal2k9 · 02-13-2003, 08:41 PM

someone rear ended me and brock them both. I had a set of 1 7/8's headers so i had exhaust shop install and insurance pay much cheaper than the $400 set of ram horns manifolds.

O ya headers sound MUCH smoother

crazy longhorn · 02-13-2003, 08:43 PM

Nadda.....full length headers for my "toy".

crazyL

Blue Beard · 02-13-2003, 08:59 PM

I took headers off, mainly because they didn't fit very well. The right side rubbed the frame and the brake lines, doing a big number on my brake fliuid.

They also had every bolt loose, at the header and the collector.

Glad to go back to the ram horns....and if you want to get them cheap.....go to a muffler shop......they throw away alot of them for people changing over to headers.

Guess they don't know what they are worth.......

**StingRay** · 02-13-2003, 09:06 PM

Original equipment here too.

AndrewDT · 02-13-2003, 09:18 PM

Yep, straight dump.

**jamie72** · 02-13-2003, 09:22 PM

i run them too.

P455 · 02-13-2003, 09:36 PM

I run them, they're both cracked... installing headers soon.

Jackal2k9 · 02-13-2003, 09:47 PM

hey p455. are they big or small cracks? if they are not to bad ill buy them off you for a few bills

FRENCHBLUE72 · 02-13-2003, 10:59 PM

me too

P455 · 02-13-2003, 11:21 PM

Jackal2k9: They're not that bad, the drivers side crack is an inch or so long and maybe .025 wide.. I haven't looked at them in a while. I'll let you know. Probably not going to put headers on until I convert to an auto trans this spring/summer, but I'll hang onto them for you if you want them.

Suicide-D · 02-13-2003, 11:22 PM

What is a set of good, not cracked, and good studded rams horns worth? I have a set that came off my 71 because my heads wouldn't accept them... the valve covers were hitting them. I had to go with Headers. I was going to slap them on the 68 if it ever got a v8 but I have 2 sets of headers... I have the ones that sweep back, instead of going straight down.

Jackal2k9 · 02-13-2003, 11:22 PM

deffinately. and if you dont want to go to headers i can have them patched for you cheap 15 bucks or less.
as long as its not craked around the gasket surfaces.

Dirt Dobber: the exhaust shop wanted to charge me 200 a pop to get replacements when mine were broken in a collision. Thats inflated a bit... ebay value is 125-300 depending on numbers, condition, etc.

Hotrod70C10 · 02-13-2003, 11:24 PM

I was until a had a little incident at the lake.... I didn't realize how deep a hole was and went down into it...I didn't get stuck but it bent my exhaust pipes up into the bed floor broke my carrier bearing bracket and cracked the passenger side manifold where you could see inside of it.... sucked but it's fixed now and i have some cheapo flowtech headers on it now

Jackal2k9 · 02-13-2003, 11:26 PM

yeah rams horns are weak as hell... but if you do use them they flow very well... good to 300 hp or so.

Suicide-D · 02-13-2003, 11:29 PM

Well I guess I'll dig'em out this weekend and put them out there for sale. I know they are in very good shape. I was kinda tweaked when I could'nt use them.

matt_field · 02-13-2003, 11:32 PM

how about some 63-64 vette ones worth? straight dump. thats what i have i think they were 3" or 2.5''

02-13-2003, 07:19 PM	#1
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	? How many are running ram horns? How many are running ram horns? __________________ 69 swb stepside, rebuild and upgrade in progress

02-13-2003, 07:24 PM	#2
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	me __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

02-13-2003, 07:35 PM	#3
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	me2 __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

02-13-2003, 07:40 PM	#4
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	me3 __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

02-13-2003, 07:41 PM	#5
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	I am on the 68 and headers on the 69 __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

02-13-2003, 08:00 PM	#6
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	me, i like em, __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

02-13-2003, 08:04 PM	#7
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Thinking of using the horns Headder smight sound nice. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

02-13-2003, 08:18 PM	#8
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	I am, but namely because I can't afford to go with headers yet. __________________ Project1970 - LS1 Swap Complete!

02-13-2003, 08:32 PM	#9
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	im with Project1970 on that one, cant afford anything else __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

02-13-2003, 08:41 PM	#10
Jackal2k9 Registered User Join Date: Apr 2002 Location: Katy, Texas Posts: 171	Me a while ago someone rear ended me and brock them both. I had a set of 1 7/8's headers so i had exhaust shop install and insurance pay much cheaper than the $400 set of ram horns manifolds. O ya headers sound MUCH smoother

02-13-2003, 08:43 PM	#11
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Nadda.....full length headers for my "toy". crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

02-13-2003, 08:59 PM	#12
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	I took headers off, mainly because they didn't fit very well. The right side rubbed the frame and the brake lines, doing a big number on my brake fliuid. They also had every bolt loose, at the header and the collector. Glad to go back to the ram horns....and if you want to get them cheap.....go to a muffler shop......they throw away alot of them for people changing over to headers. Guess they don't know what they are worth....... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-13-2003, 09:06 PM	#13
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Original equipment here too. __________________ Saskatoon, Saskatchewan Canada

02-13-2003, 09:18 PM	#14
AndrewDT Registered User Join Date: Jul 2001 Location: North Woods, Minnesota Posts: 196	Yep, straight dump. __________________ '72 Suburban 4X4 "Save the Earth, kill yourself"

02-13-2003, 09:22 PM	#15
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	i run them too. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com



Register or Log In To remove these advertisements.

02-13-2003, 09:36 PM	#16
P455 Registered User Join Date: Jan 2003 Location: San Antonio, TX Posts: 16	I run them, they're both cracked... installing headers soon. __________________ 72 GMC Sierra Grande 00 GMC Sierra SLE 67 Pontiac LeMans/455 67 Pontiac LeMans/326

02-13-2003, 09:47 PM	#17
Jackal2k9 Registered User Join Date: Apr 2002 Location: Katy, Texas Posts: 171	hey p455. are they big or small cracks? if they are not to bad ill buy them off you for a few bills

02-13-2003, 10:59 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	me too __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-13-2003, 11:21 PM	#19
P455 Registered User Join Date: Jan 2003 Location: San Antonio, TX Posts: 16	Jackal2k9: They're not that bad, the drivers side crack is an inch or so long and maybe .025 wide.. I haven't looked at them in a while. I'll let you know. Probably not going to put headers on until I convert to an auto trans this spring/summer, but I'll hang onto them for you if you want them. __________________ 72 GMC Sierra Grande 00 GMC Sierra SLE 67 Pontiac LeMans/455 67 Pontiac LeMans/326

02-13-2003, 11:22 PM	#20
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	so..... What is a set of good, not cracked, and good studded rams horns worth? I have a set that came off my 71 because my heads wouldn't accept them... the valve covers were hitting them. I had to go with Headers. I was going to slap them on the 68 if it ever got a v8 but I have 2 sets of headers... I have the ones that sweep back, instead of going straight down.

02-13-2003, 11:24 PM	#22
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I was until a had a little incident at the lake.... I didn't realize how deep a hole was and went down into it...I didn't get stuck but it bent my exhaust pipes up into the bed floor broke my carrier bearing bracket and cracked the passenger side manifold where you could see inside of it.... sucked but it's fixed now and i have some cheapo flowtech headers on it now __________________ 70' C-10 LWB Fleetside 4.5/6 drop

02-13-2003, 11:26 PM	#23
Jackal2k9 Registered User Join Date: Apr 2002 Location: Katy, Texas Posts: 171	yeah rams horns are weak as hell... but if you do use them they flow very well... good to 300 hp or so.

02-13-2003, 11:29 PM	#24
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	Holy Cow Well I guess I'll dig'em out this weekend and put them out there for sale. I know they are in very good shape. I was kinda tweaked when I could'nt use them.

02-13-2003, 11:32 PM	#25
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	how about some 63-64 vette ones worth? straight dump. thats what i have i think they were 3" or 2.5'' __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

Register or Log In To remove these advertisements.