My 54 GMC Build

[docrock]

I am new to the group but have been reading for a while. I was on another group but it does not lend itself to thinking outside of original or stock. You guys are amazing builders with so many great ideas.
I started this thread in the wrong area. So if you see the same pics of the project this is it.
The idea is to take the coolness of the old truck and the modern ride feel of a newer model.
First take the body off the frame and get rid of 60 year old technology

[docrock]

I stripped the cab down to bare metal and sprayed with epoxy primer. Not sure how long this project will take but I dont want to go back and resand surface rust

[docrock]

This is the donnor chassis with a fender. every once in a while you need to visualize your direction.

[docrock]

I bought the 93 Chevy extended cab for 700. running and driving.
The front had been wrecked but I figured I would strip everything and see what I could use. The truck is 142 inch wheel base. The GMC is a 116 inch wheel base. I figured on cutting the frame and boxing the area of the joint. what I found was a factory joint just behind the front wheels

[docrock]

So I cut the weld

[docrock]

Removed 26 inches

[JoeDude]

Originally Posted by docrock

Attachment 597902
I stripped the cab down to bare metal and sprayed with epoxy primer. Not sure how long this project will take but I dont want to go back and resand surface rust

Do you know if the epoxy primer seals the rust like the stop-rust stuff that turns black?

Joe
54 Chevy 3100

[docrock]

The converter works great on turning rust to iron oxide. Then spray epoxy primer on top of that. Every attempt should be made to sand the metal with a course grit to get the best bite of the epoxy into the metal. Metal etch works great to for bonding to bare metal and then epoxy over that.

[docrock]

I miss this truck. Any chance anyone has seen it?

[docrock]

Has anyone seen my old project?

[Kabwe]

I like that Woodie man, thats a great ride.

[docrock]

Thanks. Woodies are a crazy build. There is no bondo and everything you do shows. Mistakes are costly. I did all the work on that car. Wood, metal, paint, electrical, running gear and scraps of two cars and lots of friends with spare parts. Its a sickness because as soon as I finish the truck I am starting a 49 merc woodie.

[OrrieG]

Was it an original woodie or did you add the wood to a standard wagon? I am leaning toward a 50's Willys 4wd woodie for a project after the 64 Chevelle to kill two birds with one stone. Might do a BBEEP envoy type conversion. I have the wood working skills and enjoy working with wood.

[docrock]

This car is a factory Ford Woodie. The Envoy works great. I meet a guy recently who builds AD style Chevy Woodies. A Willys Woodie looks cool. The 41 Chevy dump truck that I have in my drive way I am leaning toward a wood body sitting on a 3500 4x4 chassis. That would be a lumber yard of wood that could climb through the forest. lol

['58Patch]

Dude, I might have to swing by and learn a thing or two from you!

[OrrieG]

Originally Posted by docrock

This car is a factory Ford Woodie. The Envoy works great. I meet a guy recently who builds AD style Chevy Woodies. A Willys Woodie looks cool. The 41 Chevy dump truck that I have in my drive way I am leaning toward a wood body sitting on a 3500 4x4 chassis. That would be a lumber yard of wood that could climb through the forest. lol

This is way out there but why not use the 41 chassis, make woodie type doors and lower cab that transitions into a matching wood dump or flat bed? Or a woodie roadster look on big truck frame. Room for lots surf boards or rolling party shack? Too much caffine this morning I guess but could be fun...

[docrock]

How about an update with pics[ATTACH][/ATTACH]
these are the original body mounts recut to fit in there new location.
the bolt through the orinal bolt holes in the truck. the rear cab mounts i turned them 180 degrees and the bolt into an original bolt location.
For fun I started to fill all the unnecessary holes in the body. im using the late model gas tank with the fuel pump in the tank.

[docrock]

Cut the ruct out of the rear corners.
The frame is 3 inches wider so I had to remove the turn downs and move them out

[docrock]

typical front corner rust cut out and patch

[docrock]

OrrieG way to much fun. Barbq on a woodie. Sounds like a party. lol
58Patch its a funny thing my builds. My friend in the buisness says I have blind luck.
He saw the woodie before I built it and said it was an impossible build with so much of the car missing and rusted. My current build he says "Your just to inexperienced to know that you cant build what your building". I say you can build anything, its your own mind and the expressions of others that get in the way.

[T Hilde]

Looks good, keep the pictures coming.

[docrock]

todays plan was fix the fender gap. let me know what you think

[docrock]

['58Patch]

Fenders look great. Nice progress!

[docrock]