Solenoid valve mounting

[b&a72]

Was wondering where you guys are mounting your solenoid valves? Building brackets etc? Also do the 2 front ones need to be close to the front of the truck to work properly? Any pictures would be helpful.

[dv8customs]

You can buy brackets or build your own pretty easily. The valves don't have to be close to the bag they are working. As for location find a place that is easily accessible and provides protection from road debris.

[michael bustamante]

I mounted mine to a piece of flat stock with short u bolts and bolted them to the side of the frame right underneath the front part of the bed.

[nastyc10]

I had some L-shaped brackets layin around that I drilled some holes in and mounted to the frame under the bed up near the cab. Then bolted the valves on to them. They work fine.

[kev2809]

i used small u bolts from lowes and bolted them to flat piece of metal, then bolted that in between my frame rails behind my gas tank. i will build a hatch that opens on the floor so i can service them if i need to. heres a pic..

[b&a72]

Thanks guys I was going to fab a bracket to put them all on but just wanted to see what other people where doing.

[N2TRUX]

As mentioned find a safe location and build your bracket to fit. There have been a couple threads on the subject with some good quality pics. Try drilling down through the posts and see what you find.