72 GMC Rad Support Work With... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Deaol · 07-04-2010, 07:56 PM

Just wondering if there were any differences between the 68 GMC support and a 72 GMC support. Trying to find complete good condition GMC (quad buckets) supports has been a pain and I have a chance to pickup a 72 GMC support for a good deal but don't know if I will be able to make it work with a 68 hood/grille etc.

Thanks in advance for any feedback

Sammy · 07-04-2010, 10:39 PM

Other than holes cut for air or aux battery brackets they should be the same for the GMC's.

Livrat · 07-04-2010, 10:55 PM

The 72 GMC core support will bolt on the same, the only difference is the 68 GMC has threaded holes across the bottom front for the lower valance, the 72 support does not.

bglad420 · 07-04-2010, 10:53 PM

I think I might have one off a 72. I can go take a gander at it and let you know if its anything worth while. I'm just down in Bellingham WA

bglad420 · 07-04-2010, 10:54 PM

Whoops a little backwards there I thought you found a 68 and wanted a 72... drrrr.

07-04-2010, 07:56 PM	#1
Deaol Registered User Join Date: Mar 2010 Location: N. Vancouver Island Posts: 122	72 GMC Rad Support Work With... Just wondering if there were any differences between the 68 GMC support and a 72 GMC support. Trying to find complete good condition GMC (quad buckets) supports has been a pain and I have a chance to pickup a 72 GMC support for a good deal but don't know if I will be able to make it work with a 68 hood/grille etc. Thanks in advance for any feedback __________________ * 1968 GMC Swb - 98% done (current restoration) * 1971 Chevy Lwb - Retired Dump Hauler * 1982 K10 Longbox - New Dump Hauler

07-04-2010, 10:39 PM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: 72 GMC Rad Support Work With... Other than holes cut for air or aux battery brackets they should be the same for the GMC's. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-04-2010, 10:55 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 72 GMC Rad Support Work With... The 72 GMC core support will bolt on the same, the only difference is the 68 GMC has threaded holes across the bottom front for the lower valance, the 72 support does not.

07-04-2010, 10:53 PM	#4
bglad420 Registered User Join Date: Dec 2005 Location: Bellingham, WA Posts: 167	Re: 72 GMC Rad Support Work With... I think I might have one off a 72. I can go take a gander at it and let you know if its anything worth while. I'm just down in Bellingham WA __________________ 70 GMC LWB Fleetside, 402BB, TH400 90K original only cost $50.

07-04-2010, 10:54 PM	#5
bglad420 Registered User Join Date: Dec 2005 Location: Bellingham, WA Posts: 167	Re: 72 GMC Rad Support Work With... Whoops a little backwards there I thought you found a 68 and wanted a 72... drrrr. __________________ 70 GMC LWB Fleetside, 402BB, TH400 90K original only cost $50.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.