4 Core Radiator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GREEN70-72 · 02-19-2003, 03:58 PM

IS THERE ANY DIFFERENCE IN MOUNTING A STANDARD 350 RAD. THEN A 4 CORE OUT OF A BIG BLOCK TRUCK? OR JUST A DROP IN SWAP? THANKS
GREEN70-72

Wootdog · 02-19-2003, 05:00 PM

When I went from a two core to a four core. I had to change the mounts on the bottom and top. The ones on the bottom are welded in. Wootdog

Orence1 · 02-19-2003, 05:27 PM

Wootdog is right. The brackets that hold the SB radiator are too narrow for the 4 core. These units can be had from Wes or any of the other parts guys we have here. Not spendy at all. I think the four of them were less than $20. They come with some rubber inserts to protect the radiator metal from the bracket metal. Good luck.

02-19-2003, 03:58 PM	#1
GREEN70-72 Registered User Join Date: Feb 2002 Location: CRESTVIEW,FL,US Posts: 355	4 Core Radiator IS THERE ANY DIFFERENCE IN MOUNTING A STANDARD 350 RAD. THEN A 4 CORE OUT OF A BIG BLOCK TRUCK? OR JUST A DROP IN SWAP? THANKS GREEN70-72

02-19-2003, 05:00 PM	#2
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	When I went from a two core to a four core. I had to change the mounts on the bottom and top. The ones on the bottom are welded in. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

02-19-2003, 05:27 PM	#3
Orence1 Registered User Join Date: Jan 2000 Location: Bothell, WA Posts: 548	Wootdog is right. The brackets that hold the SB radiator are too narrow for the 4 core. These units can be had from Wes or any of the other parts guys we have here. Not spendy at all. I think the four of them were less than $20. They come with some rubber inserts to protect the radiator metal from the bracket metal. Good luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.