Bench seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6863m · 07-23-2010, 12:06 AM

I have searched and looked through the different posts and that started me looking on craigslist for a seat.

I found a 65 suburban front seat 60/40. Would that fit right into my 62 C-10 without too much modification.

There was also a 67 but I would think that would be different in size and mounts. I don't have any existing mounts.

**Captainfab** · 07-23-2010, 12:11 AM

You're going to have to drill some holes to mount that Suburban seat in your truck. I've read that the '67-'72 seats fit good in the '60-'66's, but I'm not sure about the mounting brackets bolting to the floor.

6863m · 07-23-2010, 12:32 AM

Captain Fab, but any seat from 60 thru 66 are a bolt in my 62? There seem to be some out there within a few hundred miles and I don't care about the covers. Seems like I might have some luck finding one. My choice is a new one, frame only for about $800.

**Captainfab** · 07-23-2010, 12:39 AM

As far as I know all '60-'66 pickup seats interchange......

Quote:

Originally Posted by 6863m

Captain Fab, but any seat from 60 thru 66 are a bolt in my 62? There seem to be some out there within a few hundred miles and I don't care about the covers. Seems like I might have some luck finding one. My choice is a new one, frame only for about $800.

6863m · 07-23-2010, 12:48 AM

Thanks, I will put an add in the local craigslist and see how I can do. It is a great experience for me. Thanks for the help.

jonzcustomshop · 07-23-2010, 09:06 AM

my wifes truck has an 80's seat in it, all i had to do was change out the tracks for 60-66, and they bolted right up to the seat. only thing is that the 80's seat does not fold forward..

REDNOSE65 · 07-23-2010, 10:21 AM

I used a seat out of a 91 Chevy pick up ...
Sit lower and way more comfortable.
Got it reupholstered with the diamond pattern.

Rich 5150 69 · 07-23-2010, 06:46 PM

I went to several differant car lots and sat in many differant seats until I narrowed it down, then bought `05 silverado seats with consol.

nomrlz · 08-02-2010, 11:17 PM

Quote:

Originally Posted by Rich 5150 69

I went to several differant car lots and sat in many differant seats until I narrowed it down, then bought `05 silverado seats with consol.

i just picked these up from a '00 silverado today

got the rear one too but will just end up selling it. or putting it on the fron porch

64swb · 07-23-2010, 10:45 PM

i know i put the seat out of my old 72 chevy in my 64 and it bolted right up to the factory holes.

chevy_mike · 08-02-2010, 11:42 PM

I just bolted my '68 bench into my '65 yesterday. Bolted right in with no mods.

6863m · 08-03-2010, 04:16 PM

I took my old seat I bought to the powder coater today with the seat rails. We have to do a little welding on the seat back adjustment plate but that is about it.

07-23-2010, 12:06 AM	#1
6863m Registered User Join Date: Feb 2009 Location: Alpine Ca, Posts: 123	Bench seat I have searched and looked through the different posts and that started me looking on craigslist for a seat. I found a 65 suburban front seat 60/40. Would that fit right into my 62 C-10 without too much modification. There was also a 67 but I would think that would be different in size and mounts. I don't have any existing mounts.

07-23-2010, 12:11 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Bench seat You're going to have to drill some holes to mount that Suburban seat in your truck. I've read that the '67-'72 seats fit good in the '60-'66's, but I'm not sure about the mounting brackets bolting to the floor. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-23-2010, 12:32 AM	#3
6863m Registered User Join Date: Feb 2009 Location: Alpine Ca, Posts: 123	Re: Bench seat Captain Fab, but any seat from 60 thru 66 are a bolt in my 62? There seem to be some out there within a few hundred miles and I don't care about the covers. Seems like I might have some luck finding one. My choice is a new one, frame only for about $800.

07-23-2010, 12:48 AM	#5
6863m Registered User Join Date: Feb 2009 Location: Alpine Ca, Posts: 123	Re: Bench seat Thanks, I will put an add in the local craigslist and see how I can do. It is a great experience for me. Thanks for the help.

07-23-2010, 09:06 AM	#6
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Bench seat my wifes truck has an 80's seat in it, all i had to do was change out the tracks for 60-66, and they bolted right up to the seat. only thing is that the 80's seat does not fold forward.. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

07-23-2010, 10:21 AM	#7
REDNOSE65 Registered User Join Date: Dec 2009 Location: DALLAS, TEXAS Posts: 1,908	Re: Bench seat I used a seat out of a 91 Chevy pick up ... Sit lower and way more comfortable. Got it reupholstered with the diamond pattern. __________________ RED NOSE '65 LOS HITTERS C.C DALLAS, TEXAS The making of a Red Nose... http://www.67-72chevytrucks.com/vboa...d.php?t=396518

07-23-2010, 06:46 PM	#8
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: Bench seat I went to several differant car lots and sat in many differant seats until I narrowed it down, then bought `05 silverado seats with consol. __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

07-23-2010, 10:45 PM	#10
64swb Registered User Join Date: Mar 2007 Location: Camino, CA Posts: 182	Re: Bench seat i know i put the seat out of my old 72 chevy in my 64 and it bolted right up to the factory holes. __________________ 1978 Chevy C10, 1986 Chevy K20 'Burb, 1970 Chevelle, 1996 K2500 'Burb, 1977 Chevy K10, 1970 Ford F-250, 72 Ford F100 4x4, 1979 Chevy C30, 1982 Chevy C30, 1996 Chevy Dually 4x4 SAS, 1997 Chevy Tahoe, 1991 Ford F-350 cclb dually 4x4

08-02-2010, 11:42 PM	#11
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Bench seat I just bolted my '68 bench into my '65 yesterday. Bolted right in with no mods. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

08-03-2010, 04:16 PM	#12
6863m Registered User Join Date: Feb 2009 Location: Alpine Ca, Posts: 123	Re: Bench seat I took my old seat I bought to the powder coater today with the seat rails. We have to do a little welding on the seat back adjustment plate but that is about it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.