|
|
|
07-30-2010, 01:59 PM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Jacksonville, FL
Posts: 65
|
Shop compressor
I plan on using 3/8' drive tools and my trusty angle grinder for most of what i do at home do you think this compressor will be able to handle it? 1/2' only when the 3/8" can't get it done...
4 HP, 29 Gallon, 120 PSI Compressor 
__________________
This is were I try to sound clever and cool at the same time. |
|
|
|
07-30-2010, 02:44 PM
|
#2 |
|
Its a Truck Thing......
Join Date: Dec 2004
Location: Sierra Vista, Arizona
Posts: 3,179
|
Re: Shop compressor
Should be, the grinder may put a load on it, but the rest should be ok.
Smitty
__________________
71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van" |
|
|
|
|
07-30-2010, 02:53 PM
|
#3 | |
|
Registered User
Join Date: Sep 2008
Location: Cornelius Oregon
Posts: 1,073
|
Re: Shop compressor
Quote:
You might want to think about running 3/4 line if your going to plum your shop with air fittings. Volume makes a big difference and I have a 5 HP 80 Gallon Compressor that sometimes has a hard time keeping up. I only spent $400 on the compressor and if I keep Painting I think I am going to step up to the plate next time and get the $1500 one that makes way less moisture and is way more efficient. Only makes sense to spend the money when your spraying $2500 in paint. Good luck with your Compressor. JRBECK64 |
|
|
|
|
|
07-30-2010, 02:56 PM
|
#4 |
|
Registered User
 
Join Date: Aug 2009
Location: Rochester, MN
Posts: 201
|
Re: Shop compressor
The cubic feet per minute and pressure rating is the most important (usually rated CFM @ PSI). The other ratings are important but what really counts is the sustained flow. Most air tools run below 100 PSI. If you plan on ever wanting to run a large sander, sand blaster, cut off tool, tools that need a large volume of air at a higher pressure for long periods of time you need something that can do something like 12 CFM @ 90 PSI. Spend absolutely as much money as you can on the compressor. I have a 60 gallon sandborn that is suppose to be 11.5 CFM @ 90 PSI and I seriously doubt it's capable of that. I have problems with it keeping up with my 5" DA sander, or my 3" cut off tool. If I had the extra cash I'd sell the one I had and buy this.
http://www.tractorsupply.com/air-com...ressor-3301332
__________________
Blayne |
|
|
|
|
07-30-2010, 03:06 PM
|
#5 |
|
Family Man
Join Date: May 2010
Location: Western Kentucky
Posts: 80
|
Re: Shop compressor
I have this one, runs airtools good with minimal pressure regroup and runs a DA decent...just not long periods of time.
http://www.sears.com/shc/s/p_10153_1...6&blockType=G6 |
|
|
|
|
07-30-2010, 03:24 PM
|
#6 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Shop compressor
i think you'll find alot of limitations with a small compressor like that
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
07-30-2010, 04:20 PM
|
#7 |
|
Registered User
Join Date: Jul 2000
Location: NC
Posts: 987
|
Re: Shop compressor
Can you afford a compressor with more cfm's? I have a 10 cfm, 60 gallon compressor that is much too small for what I do (sandblasting, painting, etc). Buy the most cfm's you can afford.
|
|
|
|
|
07-30-2010, 04:34 PM
|
#8 |
|
Registered User
Join Date: Jan 2010
Location: Roanoke, Tx.
Posts: 1,561
|
Re: Shop compressor
Get a 2 stage compressor. If you run a single stage all the time you may burn it up.
|
|
|
|
|
07-30-2010, 06:17 PM
|
#9 |
|
vw guy & now c-10 guy
Join Date: Sep 2008
Location: Louisville,KY
Posts: 483
|
Re: Shop compressor
I agree. get a 2 stage. thats the only way the compressor will always have a continuous supply of air. I have a 6hp 80 gallon 2 stage porter cable that was only $1000 and it works really good- tools never slow down
|
|
|
|
|
07-30-2010, 08:03 PM
|
#10 |
|
Registered User
Join Date: Aug 2009
Location: Jacksonville, FL
Posts: 65
|
Re: Shop compressor
Thanks fellas as usual i have been educated...
__________________
This is were I try to sound clever and cool at the same time. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
