VA Passenger side Blazer/Jimmy original door no rust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 08-03-2010, 08:07 AM

LOWERED PRICE

I have a door that came off my 71 blazer. The bottom corner had some minor rust on the inside that was cut out and new metal welded in. Some hairline cracks were starting to develop around the upper hinge so that area was welded properly. Bottom of door is perfect. No other dents/dings I see (other than repaired areas in picture). The only other area to note is where the factory hinge brace mounts. It was removed to go on the repop door the PO used so it will need a new one.

Asking 225 FIRM plus shipping. Repops run more than this and trust me....they take a lot of work to make fit correctly. Again, this is an original blazer door....not a cut down truck door.

clean door bottom

inside

VA72C10 · 12-14-2010, 11:37 AM

ttt....going ebay next week...last offer225 plus shipping FIRM...

NW_Ryker · 12-27-2010, 12:16 AM

You still have the door?

VA72C10 · 01-14-2011, 10:20 AM

still available...some local interest but no one has shown up yet

*yellowdawg* · 01-14-2011, 11:48 PM

300 0r 225?

VA72C10 · 01-14-2011, 11:54 PM

It's all the way down to 225

VA72C10 · 01-21-2011, 09:26 PM

ttt....will be on ebay Monday if not sold here

VA72C10 · 01-26-2011, 08:53 PM

on ebay now

VA72C10 · 02-04-2011, 09:03 AM

200 FIRM for a board member now. final offer before this goes in cold storage

VA72C10 · 02-06-2011, 01:11 AM

ttt

VA72C10 · 02-08-2011, 08:15 PM

ttt

VA72C10 · 02-10-2011, 03:37 AM

ttt

VA72C10 · 02-11-2011, 12:54 AM

ttt

VA72C10 · 02-13-2011, 04:48 AM

ttt....someone wants this instead of cutting down a truck door or trying to patch a rusted out one

VA72C10 · 02-13-2011, 11:06 PM

ttt

VA72C10 · 02-15-2011, 01:28 AM

ttt

VA72C10 · 02-18-2011, 12:53 AM

ttt

VA72C10 · 02-19-2011, 03:13 PM

ttt

VA72C10 · 06-02-2011, 03:38 AM

Still have this...forgot about it for a bit

200 FIRM is my best price on this before I save it for a future blazer

47thriftmaster · 06-02-2011, 06:35 PM

I'll take it for $200 if you can give til the end of the month to get the cash. Just paid for wheels then to coat them, a engine, and some hub caps all in two and a half weeks. Wife will kill me if I get this now, but wouldn't notice at the end of the month. LOL

VA72C10 · 06-02-2011, 06:46 PM

Quote:

Originally Posted by 47thriftmaster

I'll take it for $200 if you can give til the end of the month to get the cash. Just paid for wheels then to coat them, a engine, and some hub caps all in two and a half weeks. Wife will kill me if I get this now, but wouldn't notice at the end of the month. LOL

Sure thing, Sold pending payment.

Will you pick up or need it shipped?

47thriftmaster · 06-02-2011, 07:11 PM

Well your 4 hours north of me so, Picking it up would be easier but just as much as shipping these days. Maybe we could meet in Petersburg to drop 45 min.

dujobu · 06-13-2011, 02:50 PM

Still got this door?

VA72C10 · 06-17-2011, 03:31 PM

Quote:

Originally Posted by dujobu

Still got this door?

it's sold pending payment and pickup from 47thriftmaster. If for some reason that deal falls through I'll pm you.

Rochlow · 12-02-2010, 10:17 AM

K5blazin is looking for some doors. Shoot him a PM.

08-03-2010, 08:07 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Passenger side Blazer/Jimmy original door no rust LOWERED PRICE I have a door that came off my 71 blazer. The bottom corner had some minor rust on the inside that was cut out and new metal welded in. Some hairline cracks were starting to develop around the upper hinge so that area was welded properly. Bottom of door is perfect. No other dents/dings I see (other than repaired areas in picture). The only other area to note is where the factory hinge brace mounts. It was removed to go on the repop door the PO used so it will need a new one. Asking 225 FIRM plus shipping. Repops run more than this and trust me....they take a lot of work to make fit correctly. Again, this is an original blazer door....not a cut down truck door. clean door bottom inside __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 12-14-2010 at 11:38 AM.

12-14-2010, 11:37 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt....going ebay next week...last offer225 plus shipping FIRM... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-27-2010, 12:16 AM	#3
NW_Ryker Registered User Join Date: Jul 2010 Location: Carnation Wa Posts: 199	Re: Passenger side Blazer/Jimmy original door no rust You still have the door?

01-14-2011, 10:20 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust still available...some local interest but no one has shown up yet __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-14-2011, 11:48 PM	#5
yellowdawg Account Suspended Join Date: Dec 2010 Posts: 87	Re: Passenger side Blazer/Jimmy original door no rust 300 0r 225?

01-14-2011, 11:54 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust It's all the way down to 225 __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-21-2011, 09:26 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt....will be on ebay Monday if not sold here __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-26-2011, 08:53 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust on ebay now __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-04-2011, 09:03 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust 200 FIRM for a board member now. final offer before this goes in cold storage __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-06-2011, 01:11 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-08-2011, 08:15 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2011, 03:37 AM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-11-2011, 12:54 AM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-13-2011, 04:48 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt....someone wants this instead of cutting down a truck door or trying to patch a rusted out one __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-13-2011, 11:06 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

02-15-2011, 01:28 AM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-18-2011, 12:53 AM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-19-2011, 03:13 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-02-2011, 03:38 AM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Passenger side Blazer/Jimmy original door no rust Still have this...forgot about it for a bit 200 FIRM is my best price on this before I save it for a future blazer __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-02-2011, 06:35 PM	#20
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Passenger side Blazer/Jimmy original door no rust I'll take it for $200 if you can give til the end of the month to get the cash. Just paid for wheels then to coat them, a engine, and some hub caps all in two and a half weeks. Wife will kill me if I get this now, but wouldn't notice at the end of the month. LOL

06-02-2011, 07:11 PM	#22
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Passenger side Blazer/Jimmy original door no rust Well your 4 hours north of me so, Picking it up would be easier but just as much as shipping these days. Maybe we could meet in Petersburg to drop 45 min.

06-13-2011, 02:50 PM	#23
dujobu Registered User Join Date: Jul 2010 Location: Wilmington, DE Posts: 639	Re: Passenger side Blazer/Jimmy original door no rust Still got this door?

12-02-2010, 10:17 AM	#25
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Passenger side Blazer/Jimmy original door no rust K5blazin is looking for some doors. Shoot him a PM.

Register or Log In To remove these advertisements.