Lift Pics

[deepnsteep]

Anybody have some pics of different lift combos? I'm thinking 2.5" with 33" tires, but I'd like to see some pics first. The alternative would be 4" lift with 33" or 35" tires. This would be going on a CCSB...

Thanks!

[Davidmichael]

This is a 4 inch lift with 35's.

[bikes&bowties]

i personally think a crew needs 4+ because of the length.. to look appropriate.. i want 6-8 and 37's when i build one

[deepnsteep]

This is what I just got home and I do not like the lift/tires it has. It has 8" suspension plus 3" body and 38"x15.5" Toyo M/T's. It drives like crap! This will be my driver and I need it to be practical and still look good...



I'm a little worried that 4" lift with 33" tires will look a little awkward.

Thanks!

Levi

[blakeduren]

deepnsteep:
Do you have your caster angles worked out?
Do you have a steering brace and crossover steering yet?
Upgrade to a XJ steering shaft.
My 6inch and 35s steered better than stock when i was done with it.

Also, always use a shackle flip in back, it rides much better. Use longer 56" springs also.

[BigRed76]

Originally Posted by blakeduren

deepnsteep:
Do you have your caster angles worked out?
Do you have a steering brace and crossover steering yet?
Upgrade to a XJ steering shaft.
My 6inch and 35s steered better than stock when i was done with it.

Also, always use a shackle flip in back, it rides much better. Use longer 56" springs also.

Does the crossover steering really help?

[BigRed76]

Originally Posted by BigRed76

Does the crossover steering really help?

Nevermind. I just did a little research on the crossover steering and it makes perfect sense now lol

[blakeduren]

Yes, even in a parking lot you can get more lock to lock turning compared to a raised steering arm correction etc. On highway bumps, your steering will not wonder as your suspension travels.
And of course, offroad is where that crossover really shines when you can actually turn all of the time.

[BigRed76]

Originally Posted by blakeduren

Yes, even in a parking lot you can get more lock to lock turning compared to a raised steering arm correction etc. On highway bumps, your steering will not wonder as your suspension travels.
And of course, offroad is where that crossover really shines when you can actually turn all of the time.

Thats good to know. my 76 K10 is all stock right now and i have horrible bump steer on the highway, and the stock steering is all tight but always feels sloppy.

[STOCKISH]

Originally Posted by deepnsteep

This is what I just got home and I do not like the lift/tires it has. It has 8" suspension plus 3" body and 38"x15.5" Toyo M/T's. It drives like crap! This will be my driver and I need it to be practical and still look good...



I'm a little worried that 4" lift with 33" tires will look a little awkward.

Thanks!

Levi

I love the look of this truck. Absolutely perfect!

[deepnsteep]

Originally Posted by 1972SuperCheyenne

I love the look of this truck. Absolutely perfect!

It does get a lot of looks. I happened to hit Hot August Nights just right in Reno bringing it to Wyo from California last Friday. It doesn't look as big in the pic as it does in person!!

deepnsteep:
Do you have your caster angles worked out?
Do you have a steering brace and crossover steering yet?
Upgrade to a XJ steering shaft.
My 6inch and 35s steered better than stock when i was done with it.

Also, always use a shackle flip in back, it rides much better. Use longer 56" springs also.

I'm not sure what you mean by caster angles?? Lifted geometry is new to me...teach me sensei!
I do not have a steering brace but am considering it. I plan on a 4" lift max and didn't really think crossover is really necessary with that amount of lift.
Note taken.
Does the shackle flip give a better ride than skyjacker springs even? Use stock springs for 4" lift?

Thanks for the input!

Levi

[86lovelongbeds]

Here is a picture of my work in progress. Have a 4 inch lift on order, as it sits in the picture it has a 3 inch lift with 33's. I photo shopped out the rust in this picture lol

[tswore]

here is mine. 4 inch all spring rough country lift. The first pic is with 33s on 16 inch wheels, and the second is how it sits now, 35/1250-20s.

[blakeduren]

I'm not sure what you mean by caster angles?? Lifted geometry is new to me...teach me sensei!
I do not have a steering brace but am considering it. I plan on a 4" lift max and didn't really think crossover is really necessary with that amount of lift.
Note taken.
Does the shackle flip give a better ride than skyjacker springs even? Use stock springs for 4" lift?

Thanks for the input!

Levi

On your front suspension, do you have extended length shackles? If so, this can cause you poor steering response unless you correct it with shims between your axle and leaf springs.
Do the steering brace!
Crossover is always worth it if you drive the truck often.
Shackle flip is the best way to go for flex and for ride quality.
Stock springs give about a 4 inch lift. I used some 56's instead of the 52s on my last blazer and got more like 5 or 6 because they had more arch to them.
Longer and flatter springs give a better ride and more flex.

Tuff Country springs tend to have the softest springs rate for aftermarket options...unless custom made.

Do you have your front sway bar still attached? If so, get rid of it.

[BigRed76]

Originally Posted by blakeduren

On your front suspension, do you have extended length shackles? If so, this can cause you poor steering response unless you correct it with shims between your axle and leaf springs.
Do the steering brace!
Crossover is always worth it if you drive the truck often.
Shackle flip is the best way to go for flex and for ride quality.
Stock springs give about a 4 inch lift. I used some 56's instead of the 52s on my last blazer and got more like 5 or 6 because they had more arch to them.
Longer and flatter springs give a better ride and more flex.

Tuff Country springs tend to have the softest springs rate for aftermarket options...unless custom made.

Do you have your front sway bar still attached? If so, get rid of it.

Why get rid of the front swaybar?

[deepnsteep]

Here is what is in there now for shims. I don't believe these to be extended length shackles.





I think this last one shows a spacer that was used to correct that geometry. I see your point on coupling the front with bad geometry though.



Brake lines are extended with braided lines. I think you can see them in one pic. They may be a little too long with less lift though.

I will look into putting on 56" springs, but I'm afraid that it would interfere too much with a hitch (that I need to add also).

Originally Posted by blakeduren

On your front suspension, do you have extended length shackles? If so, this can cause you poor steering response unless you correct it with shims between your axle and leaf springs.
Do the steering brace!
Crossover is always worth it if you drive the truck often.
Shackle flip is the best way to go for flex and for ride quality.
Stock springs give about a 4 inch lift. I used some 56's instead of the 52s on my last blazer and got more like 5 or 6 because they had more arch to them.
Longer and flatter springs give a better ride and more flex.

Tuff Country springs tend to have the softest springs rate for aftermarket options...unless custom made.

Do you have your front sway bar still attached? If so, get rid of it.

[78 Chevyrado]

Originally Posted by deepnsteep

This is what I just got home and I do not like the lift/tires it has. It has 8" suspension plus 3" body and 38"x15.5" Toyo M/T's. It drives like crap! This will be my driver and I need it to be practical and still look good...



I'm a little worried that 4" lift with 33" tires will look a little awkward.

Thanks!

Levi

Are those raceline wheels? What size are they? They look just like the 18's I bought for my C20.

[deepnsteep]

Originally Posted by 78 Chevyrado

Are those raceline wheels? What size are they? They look just like the 18's I bought for my C20.

Mine are Weld Cheyenne. They are 18x12.5 and for sale on Wyoming CL...

4 inch lift with 33's

Your truck looks great...that's pretty much the look I'm going for!

Thanks for all the input!

Levi

[sdailey]

Not a crew cab, but here's my old '87 with a 2" lift running 33's.

[Patriot]

Originally Posted by sdailey

Not a crew cab, but here's my old '87 with a 2" lift running 33's.

Are those factory 8" wheels. MAN that looks nice!!!

[weider1717]

Originally Posted by sdailey

Not a crew cab, but here's my old '87 with a 2" lift running 33's.

What are the details on the lift? is it 2" or 2.5" not seeing many 2" kits. Also are those 10" rallys?

[81square]

Originally Posted by sdailey

Not a crew cab, but here's my old '87 with a 2" lift running 33's.

What brand of lift is that? Looks great!

[mooseknuckles]

Originally Posted by deepnsteep

This is what I just got home and I do not like the lift/tires it has. It has 8" suspension plus 3" body and 38"x15.5" Toyo M/T's. It drives like crap! This will be my driver and I need it to be practical and still look good...



I'm a little worried that 4" lift with 33" tires will look a little awkward.

Thanks!

Levi

I think you bought the wrong truck to be your driver......not very practical at all, but man is it awesome!

[chevymadness]

Originally Posted by deepnsteep

This is what I just got home and I do not like the lift/tires it has. It has 8" suspension plus 3" body and 38"x15.5" Toyo M/T's. It drives like crap! This will be my driver and I need it to be practical and still look good...



I'm a little worried that 4" lift with 33" tires will look a little awkward.

Thanks!

Levi

man that trucks looks really good what are you thinking no that lift looks great and 33 tires are perfect i actually getting 33s that paint job is sweet what a great truck how much you pay for that i wouldnt change a thing

[chevymadness]

Originally Posted by deepnsteep

This is what I just got home and I do not like the lift/tires it has. It has 8" suspension plus 3" body and 38"x15.5" Toyo M/T's. It drives like crap! This will be my driver and I need it to be practical and still look good...



I'm a little worried that 4" lift with 33" tires will look a little awkward.

Thanks!

Levi

oh and forgot to say if you dont want them tires i like them alot so if your maybe thinking about selling them or something holla at me im just getting a chevy and need some treds those look nice and rims aswell