The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-25-2010, 05:10 PM   #1
palposity
Registered User
 
palposity's Avatar
 
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
Want to Buy -- Inner Fender Wells

I need 2 for my 86 K20 project. I was going to order them from one of the normal spots that sells the knock off re-productions, but I thought I would check here first to see if anyone had any good used ones for sale?

Thanks!
__________________
Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original.
View Project Pops HERE

Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig
View Project Cletus HERE - SOLD

DD--2008 Duramax CCSB
palposity is offline   Reply With Quote
Old 08-25-2010, 05:27 PM   #2
HOGDADDY
Registered User
 
HOGDADDY's Avatar
 
Join Date: Jul 2006
Location: Alabama
Posts: 661
Re: Want to Buy -- Inner Fender Wells

I have some good used ones available off a 86 c10 and I believe they are all the same.

From my research aftermarket sells for $around $50 ea. and another $100 for shipping the 2 of them and that totals $200 for aftermarket inner fenders that mifgt fit good and might not.

I will sell you mine for $140 shipping included if interested and they will fit. I can shoot ya some pics if interested.

Last edited by HOGDADDY; 08-25-2010 at 05:53 PM.
HOGDADDY is offline   Reply With Quote
Old 08-26-2010, 07:41 AM   #3
palposity
Registered User
 
palposity's Avatar
 
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
Re: Want to Buy -- Inner Fender Wells

Quote:
Originally Posted by HOGDADDY View Post
I have some good used ones available off a 86 c10 and I believe they are all the same.

From my research aftermarket sells for $around $50 ea. and another $100 for shipping the 2 of them and that totals $200 for aftermarket inner fenders that mifgt fit good and might not.

I will sell you mine for $140 shipping included if interested and they will fit. I can shoot ya some pics if interested.

I appreciate the offer, but I checked LMC and they are quoting $68.75 total shipping which puts the total for both inner fenders @ 158.65. I guess for the little price difference I should stick with the new ones.

However, If you would like to check with an alternate shipper to see if you can ship yours cheaper and let me know that is cool too. Thanks!
__________________
Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original.
View Project Pops HERE

Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig
View Project Cletus HERE - SOLD

DD--2008 Duramax CCSB
palposity is offline   Reply With Quote
Old 08-27-2010, 05:56 PM   #4
HOGDADDY
Registered User
 
HOGDADDY's Avatar
 
Join Date: Jul 2006
Location: Alabama
Posts: 661
Re: Want to Buy -- Inner Fender Wells

Thats not a bad deal at all from LMC it would be hard to beat.
HOGDADDY is offline   Reply With Quote
Old 09-06-2010, 07:35 PM   #5
palposity
Registered User
 
palposity's Avatar
 
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
Re: Want to Buy -- Inner Fender Wells

Quote:
Originally Posted by HOGDADDY View Post
Thats not a bad deal at all from LMC it would be hard to beat.
Hogdaddy, I'm having some second thoughts about buying the LMC fenders. If you can ship yours to my to get here by mid-next week please drop me a line.
__________________
Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original.
View Project Pops HERE

Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig
View Project Cletus HERE - SOLD

DD--2008 Duramax CCSB
palposity is offline   Reply With Quote
Old 08-30-2010, 09:19 AM   #6
Draggin79
Registered User
 
Draggin79's Avatar
 
Join Date: Mar 2006
Location: Baltimore, MD
Posts: 41
Re: Want to Buy -- Inner Fender Wells

I have a set of LMC innerfenders that I bought for my 78, I never used them, decided to airbag my truck and they wont work because the tire will hit. I never mounted them, they are brand new, and the undersides of them are lined with LINE-X bedliner. they are mint!! I am located in baltimore maryland, not sure if you would be interested in driving here, or having them shipped, but either way you can contact me through PM if your still interested in them.
Draggin79 is offline   Reply With Quote
Old 09-05-2010, 02:20 AM   #7
junkyardjohn
Registered User
 
junkyardjohn's Avatar
 
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
Exclamation Re: Want to Buy -- Inner Fender Wells

I JUST RECIEVED A SET OF NOS INNERS FROM ANOTHER MEMBER 400 MILES AWAY. I HAD JUST BOUGHT A SET OF REPOPS FROM LMC TWO DAYS EARLIER. I PAINTED THE NOS SET & AM GETTING READY TO INSTALL THEM. I NEVER HAD A TRIAL FIT WITH EITHER SET. LOOKING AT THEM SIDE BY SIDE THE REPOPS DON'T LOOK SO BAD. THEY SEEM TO BE ABOUT THE SAME WEIGHT . THEY (THE NOS SET) HAD A VERY LITTLE BIT OF REINFORCING WHERE THE INNERS BOLT TO THE CAB & THEY ALWAY RUST OUT IN THAT SPOT,AND THE REPOPS DID NOT. THEY'RE GOING IN AN 84 CUCV BLAZER & I JUST COULDNT BRING MYSELF TO USE THE CHINEEZ PARTS ON THE 84 CUCV BLAZER. ALL IN ALL FOR ALMOST 1/3 THEY MONEY, I THINK I WOULD USE THE REPOPS WITH A LITTLE REINFORCING. ESPESSIALLY AFTER DEALING WITH A NO-ACCOUNT SELLER. IF I HAD IT TO DO OVER I'D USE THE REPOPS 4 SURE. ANYONE CONSIDERING THEM SHOULDN'T HESITATE AT ALL AS THE QUALITY IS O-K & THERE DARN NEAR AS HEAVY AS THE NOS SET, ACCORDING TO THE SELLER IT COST AS MUCH TO SHIP THEM FROM OHIO TO KY AS IT DID FROM CA. TO KY. IF ANYONE NEEDS A BRAND NEW SET OF 81-87 REPOP INNERS, & IS WILLING TO PICK UP THESE IN SOMERSET KY
I'D SELL THESE AT 50% PERCENT ($80 TOTAL) OF WHAT I PAID FOR THEM A COUPLE OF WEEKS AGO ,& THEY'VE NEVER BEEN INSTALLED. . JOHN
__________________
junkyardjohn
69 1 TON TOW TRUCK //
84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//
LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS)

DON'T RENT U-HAUL

ALWAYS TELL THE TRUTH
IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

Last edited by junkyardjohn; 09-05-2010 at 10:52 PM. Reason: SPELLING
junkyardjohn is offline   Reply With Quote
Old 09-06-2010, 07:34 PM   #8
palposity
Registered User
 
palposity's Avatar
 
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
Re: Want to Buy -- Inner Fender Wells

Quote:
Originally Posted by junkyardjohn View Post
I JUST RECIEVED A SET OF NOS INNERS FROM ANOTHER MEMBER 400 MILES AWAY. I HAD JUST BOUGHT A SET OF REPOPS FROM LMC TWO DAYS EARLIER. I PAINTED THE NOS SET & AM GETTING READY TO INSTALL THEM. I NEVER HAD A TRIAL FIT WITH EITHER SET. LOOKING AT THEM SIDE BY SIDE THE REPOPS DON'T LOOK SO BAD. THEY SEEM TO BE ABOUT THE SAME WEIGHT . THEY (THE NOS SET) HAD A VERY LITTLE BIT OF REINFORCING WHERE THE INNERS BOLT TO THE CAB & THEY ALWAY RUST OUT IN THAT SPOT,AND THE REPOPS DID NOT. THEY'RE GOING IN AN 84 CUCV BLAZER & I JUST COULDNT BRING MYSELF TO USE THE CHINEEZ PARTS ON THE 84 CUCV BLAZER. ALL IN ALL FOR ALMOST 1/3 THEY MONEY, I THINK I WOULD USE THE REPOPS WITH A LITTLE REINFORCING. ESPESSIALLY AFTER DEALING WITH A NO-ACCOUNT SELLER. IF I HAD IT TO DO OVER I'D USE THE REPOPS 4 SURE. ANYONE CONSIDERING THEM SHOULDN'T HESITATE AT ALL AS THE QUALITY IS O-K & THERE DARN NEAR AS HEAVY AS THE NOS SET, ACCORDING TO THE SELLER IT COST AS MUCH TO SHIP THEM FROM OHIO TO KY AS IT DID FROM CA. TO KY. IF ANYONE NEEDS A BRAND NEW SET OF 81-87 REPOP INNERS, & IS WILLING TO PICK UP THESE IN SOMERSET KY
I'D SELL THESE AT 50% PERCENT ($80 TOTAL) OF WHAT I PAID FOR THEM A COUPLE OF WEEKS AGO ,& THEY'VE NEVER BEEN INSTALLED. . JOHN
Thanks John. Unfortunately I just can't make the trip to KY right now. I don't have the time to take off from work until after the 1st of the year.
__________________
Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original.
View Project Pops HERE

Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig
View Project Cletus HERE - SOLD

DD--2008 Duramax CCSB
palposity is offline   Reply With Quote
Old 09-07-2010, 04:20 PM   #9
palposity
Registered User
 
palposity's Avatar
 
Join Date: Sep 2009
Location: Syracuse NY
Posts: 684
Re: Want to Buy -- Inner Fender Wells

Just bought these from LMC. Had to get something ordered. Thanks all!
__________________
Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original.
View Project Pops HERE

Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig
View Project Cletus HERE - SOLD

DD--2008 Duramax CCSB
palposity is offline   Reply With Quote
Old 09-11-2010, 09:22 PM   #10
junkyardjohn
Registered User
 
junkyardjohn's Avatar
 
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
Re: Want to Buy -- Inner Fender Wells

I HAVEN'T INSTALLED THE LMC REPOP SET THAT I BOUGHT IN ONE OF MY OTHER TRUCKS YET, BUT THE QUALITY SEEMS PRETTY GOOD, JUST COMPARING THEM WITH A NOS SET. NOT TO BAD FOR THE $ ARE THEY?? JOHN
__________________
junkyardjohn
69 1 TON TOW TRUCK //
84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//
LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS)

DON'T RENT U-HAUL

ALWAYS TELL THE TRUTH
IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST
junkyardjohn is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com