TN Parting out 85 swb 454 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGCHEVYMAN · 08-28-2010, 09:30 PM

This is a unfinished project. I bought the truck without a motor a few years ago and it has been setting waiting for a motor until last week when i installed a 454 with a 700r. The motor had 106k on it when i removed it from a wrecked dually. I would sell the whole truck for $1200 or i will part it out. If you are wanting to build a crew cab swb i can throw in a crew cab frame for a little extra cash.
bbc fan shroud $50
bbc a/c brackets $50
swb bed $250
sport bumper with brackets $150
2wd crew cab frame $200
red seat belts $40
factory radio, i have never seen it work. $40
uncut dash bezel $40

STOCKISH · 08-29-2010, 02:48 PM

How much for just the engine?

bakerboys · 08-29-2010, 05:07 PM

how much rust on bed and bumpers

fabguy · 08-29-2010, 05:19 PM

I am interested in the tranny, if possible.

72freak · 08-29-2010, 06:02 PM

Dash pad any good?

BIGCHEVYMAN · 08-29-2010, 08:21 PM

dash pad is no good.
$700 for the motor.
$200 for the transmission
the bed and bumpers $400 there is only surface rust on the bedsides. but i have not checked the crossmembers. the bed floor is messed up around the bolt holes were the guy removed the bed got a little happy with a grinder. the bumbers have some surface rust on the back sides

STOCKISH · 08-29-2010, 09:33 PM

Any trades you're looking for?

spudz · 08-29-2010, 10:25 PM

how much just for the rear bumper brackets shipped to 29432 sc.. Id take the whole bumper but I would cost to much to ship.

BIGCHEVYMAN · 08-29-2010, 11:00 PM

sorry i won't seperate the bumper and brackets.
i would be interested in trades, but the only thing i am really looking for is a nv4500 5 speed and farm tractors. What did you have in mind?

fabguy · 08-29-2010, 11:27 PM

will you ship the tranny to me? I will of course cover shipping. to 91741 (glendora,Ca.)

BigRed76 · 08-29-2010, 11:43 PM

what shape are the side mirrors in?

BIGCHEVYMAN · 08-30-2010, 05:59 PM

The mirrors are in pretty good shape.
sorry but i don't want to ship anything as large as a transmission.

SBTork · 08-30-2010, 08:00 PM

Couple questions... What condition is the grille in? Would you be willing to ship it? How much for it?

-Thanks

BIGCHEVYMAN · 08-30-2010, 10:36 PM

the grille is in great shape, but i have someone who is interested in the whole truck. so i will wait for a a couple days for that guy to make up his mind before i price it to you.

SBTork · 08-30-2010, 11:17 PM

ok, keep me posted.

BigRed76 · 08-30-2010, 11:20 PM

Quote:

Originally Posted by BIGCHEVYMAN

The mirrors are in pretty good shape.

If you don't end up selling the whole truck then I am interseted in the mirrors.

baclay9 · 09-01-2010, 10:15 AM

I would be interested in those push bars on the front bumper if you are interested in selling them... Let me know

thehitchmaster · 09-06-2010, 07:42 PM

pm'ed on bumper and brackets.

08-28-2010, 09:30 PM	#1
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Parting out 85 swb 454 This is a unfinished project. I bought the truck without a motor a few years ago and it has been setting waiting for a motor until last week when i installed a 454 with a 700r. The motor had 106k on it when i removed it from a wrecked dually. I would sell the whole truck for $1200 or i will part it out. If you are wanting to build a crew cab swb i can throw in a crew cab frame for a little extra cash. bbc fan shroud $50 bbc a/c brackets $50 swb bed $250 sport bumper with brackets $150 2wd crew cab frame $200 red seat belts $40 factory radio, i have never seen it work. $40 uncut dash bezel $40 Attached Images Last edited by BIGCHEVYMAN; 08-28-2010 at 09:42 PM. Reason: add pics

08-29-2010, 02:48 PM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting out 85 swb 454 How much for just the engine? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-29-2010, 05:07 PM	#3
bakerboys Registered User Join Date: Aug 2010 Location: Pikeville NC Posts: 239	Re: Parting out 85 swb 454 how much rust on bed and bumpers

08-29-2010, 05:19 PM	#4
fabguy Elev8r Man Join Date: Aug 2010 Location: Glendora, CA Posts: 835	Re: Parting out 85 swb 454 I am interested in the tranny, if possible.

08-29-2010, 06:02 PM	#5
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Parting out 85 swb 454 Dash pad any good? __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

08-29-2010, 08:21 PM	#6
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Parting out 85 swb 454 dash pad is no good. $700 for the motor. $200 for the transmission the bed and bumpers $400 there is only surface rust on the bedsides. but i have not checked the crossmembers. the bed floor is messed up around the bolt holes were the guy removed the bed got a little happy with a grinder. the bumbers have some surface rust on the back sides

08-29-2010, 09:33 PM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting out 85 swb 454 Any trades you're looking for? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-29-2010, 10:25 PM	#8
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Parting out 85 swb 454 how much just for the rear bumper brackets shipped to 29432 sc.. Id take the whole bumper but I would cost to much to ship. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

08-29-2010, 11:00 PM	#9
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Parting out 85 swb 454 sorry i won't seperate the bumper and brackets. i would be interested in trades, but the only thing i am really looking for is a nv4500 5 speed and farm tractors. What did you have in mind?

08-29-2010, 11:27 PM	#10
fabguy Elev8r Man Join Date: Aug 2010 Location: Glendora, CA Posts: 835	Re: Parting out 85 swb 454 will you ship the tranny to me? I will of course cover shipping. to 91741 (glendora,Ca.)

08-29-2010, 11:43 PM	#11
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Parting out 85 swb 454 what shape are the side mirrors in? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

08-30-2010, 05:59 PM	#12
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Parting out 85 swb 454 The mirrors are in pretty good shape. sorry but i don't want to ship anything as large as a transmission. Last edited by BIGCHEVYMAN; 08-30-2010 at 10:37 PM. Reason: lhadf

08-30-2010, 08:00 PM	#13
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Parting out 85 swb 454 Couple questions... What condition is the grille in? Would you be willing to ship it? How much for it? -Thanks __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

08-30-2010, 10:36 PM	#14
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Parting out 85 swb 454 the grille is in great shape, but i have someone who is interested in the whole truck. so i will wait for a a couple days for that guy to make up his mind before i price it to you.

08-30-2010, 11:17 PM	#15
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Parting out 85 swb 454 ok, keep me posted. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....



Register or Log In To remove these advertisements.

09-01-2010, 10:15 AM	#17
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: Parting out 85 swb 454 I would be interested in those push bars on the front bumper if you are interested in selling them... Let me know

09-06-2010, 07:42 PM	#18
thehitchmaster Registered User Join Date: Nov 2009 Location: Foley, AL Posts: 94	Re: Parting out 85 swb 454 pm'ed on bumper and brackets. __________________ http://www.gulftruckinc.com

Register or Log In To remove these advertisements.