|
|
|
08-29-2010, 12:50 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: jackson, michigan
Posts: 246
|
wiring question
when i pulled the engine and trans (700r4) out of the 1986 GMC donor truck, i identified the harness that runs from the vacumn converter lock up switch on the firewall down to the transmission. Also, I found this (it was disconnected) lying on top of the transmission. It runs off the harness for the lockup switch. I'm thinking it is the brake cancel switch wires for the lockup converter. Am I right or is it something else. Not the best picture, but it is just a male electrical plug with 2 wires. Anyone know for sure?
www.picturetrail.com/skysoldier173rd |
|
|
|
08-30-2010, 12:40 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: wiring question
There are a couple recent threads on 700R4 lockup over in the 'Engine and Drivetrain' section. You might find your answer there. If not see if a mod will move this thread over there. There are a couple of excellent transmission guys that hang out there.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
