VT Mahanian's billet radio bezel for cut dashes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rochlow · 09-01-2010, 06:56 PM

So after talking with Jared about the bezel's that he's made in the past. He agreed that if I could get 20 confirmations from people who wanted one of these that he would have a batch made.

Here's the hitch. He will be out of town for a month, but if I can get the 20 confirms by the end of the week he can start the process.

Once I get the twenty confirms, I will PM each person Mahanian's paypal info and you can pay him directly. I will list the people that have committed in this thread.

The cost is $99 shipped to your door. As far as I know they come with all instruction and hardware to mount it.

People who have committed:
1. Rochlow
2. Dieselwrencher
3. ORANGESI
4. D.PASSMORE X2
5. blazercrazy70
6. Huero
7. hoss67
8. Lemield X2
9. chevy2tom
10. CPNE
11. c10seconds
12. MrClean
13. 1969stella
14. jackyl9999
15. GASWAGON X2
16. Already Gone
17. jacobriley
18. Black71Shorty
19. scrapmetal
20. tubbedII
21. dhc871

(Mods if I've put this in the wrong forum or if I'm not allowed to do this for some reason please advice what is need to comply)

**kev2809** · 09-01-2010, 07:15 PM

man that looks killer in there!

if i was a little closer to in my build i would def grab one of these

**Dieselwrencher** · 09-01-2010, 07:34 PM

I want one. I am not close in my build, but I want to help get the 20 needed for this run to be made.

hvychvydriver · 11-08-2010, 09:00 AM

I would like one also
Posted via Mobile Device

OARNGESI · 09-01-2010, 07:44 PM

Im in

**D.PASSMORE** · 09-01-2010, 08:24 PM

Put me down for two.

**hybridchevy71** · 09-01-2010, 08:48 PM

quick qestion are these bezels the same as the ones 'mekdad" produced back in 09? hes price was 50 shipped, is he running onother bacth?

usmcchevy · 09-01-2010, 08:55 PM

Quote:

Originally Posted by hybridchevy71

quick qestion are these bezels the same as the ones 'mekdad" produced back in 09? hes price was 50 shipped, is he running onother bacth?

No, these are the better looking (in my opinion) original. I have one Mahanian's plates here ready to install and it is truly a work of art. Complete with instructions and hardware.

**blazercrazy70** · 09-01-2010, 10:53 PM

im in keep us posted

Rochlow · 09-01-2010, 11:00 PM

Quote:

Originally Posted by hybridchevy71

quick qestion are these bezels the same as the ones 'mekdad" produced back in 09? hes price was 50 shipped, is he running onother bacth?

mekdad's bezel appears to cover the whole indentation. These follow the lines of it and are fully polished.

hoss67 · 09-02-2010, 06:30 AM

Put me in line for one. Just need to no how to pay? Thanks Randy

Lemield · 09-02-2010, 08:34 AM

I'm in for two of them.

**chevy2tom** · 09-02-2010, 09:24 AM

Looks awesome, put me down for one.

**CPNE** · 09-02-2010, 09:56 AM

I'm in, put me down for one

c10seconds · 09-02-2010, 01:10 PM

Ill take one

MrClean · 09-02-2010, 03:40 PM

Put me down for one!

SWB4x4 · 09-02-2010, 03:58 PM

I want one for a double din any chance on him making me one?

Rochlow · 09-02-2010, 04:23 PM

Quote:

Originally Posted by SWB4x4

I want one for a double din any chance on him making me one?

I'm not sure.. Send him a Pm about it. I just got this set in motion of the single din.

tubbedII · 09-02-2010, 06:23 PM

Does he have a time frame on how long it'll be to machine and ship them from today since he'll be gone for a month?

Rochlow · 09-02-2010, 07:36 PM

Quote:

Originally Posted by tubbedII

Does he have a time frame on how long it'll be to machine and ship them from today since he'll be gone for a month?

From what we talked about, If we get the 20 confirms by the end of the week (sun) he can start the process. I know that he picks them up from the machinist and they go to a polisher. So I would expect that they would be done mid October.

I know the timing is kinda messed up, but there were a few post with alot of people talking how they wanted one. So I figured I'd get something going.

From what I heard Jared is a stand up guy and puts out a quality product. However, it may take alittle long than expected because of the sitituation.

*Shane* · 09-02-2010, 08:07 PM

Quote:

Originally Posted by Rochlow

From what I heard Jared is a stand up guy and puts out a quality product.

I can vouch for this.

1967stella · 09-03-2010, 02:23 AM

i am deinatly in how much are they total cost and shipping to va and how to pay. i have been waiting for something like this and this looks amazing

OldSkool71 · 09-03-2010, 05:38 AM

My dash isn't cut...(yet)....but this is making me reconsider....I have an empty spot to fill....looks nice

71meangreenc10 · 09-03-2010, 07:25 PM

I have one and its nice......

Smitty

Rochlow · 09-04-2010, 11:33 AM

Bump..

09-01-2010, 06:56 PM	#1
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Mahanian's billet radio bezel for cut dashes So after talking with Jared about the bezel's that he's made in the past. He agreed that if I could get 20 confirmations from people who wanted one of these that he would have a batch made. Here's the hitch. He will be out of town for a month, but if I can get the 20 confirms by the end of the week he can start the process. Once I get the twenty confirms, I will PM each person Mahanian's paypal info and you can pay him directly. I will list the people that have committed in this thread. The cost is $99 shipped to your door. As far as I know they come with all instruction and hardware to mount it. People who have committed: 1. Rochlow 2. Dieselwrencher 3. ORANGESI 4. D.PASSMORE X2 5. blazercrazy70 6. Huero 7. hoss67 8. Lemield X2 9. chevy2tom 10. CPNE 11. c10seconds 12. MrClean 13. 1969stella 14. jackyl9999 15. GASWAGON X2 16. Already Gone 17. jacobriley 18. Black71Shorty 19. scrapmetal 20. tubbedII 21. dhc871 (Mods if I've put this in the wrong forum or if I'm not allowed to do this for some reason please advice what is need to comply) Last edited by Rochlow; 09-09-2010 at 04:26 PM.

09-01-2010, 07:15 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,140	Re: Mahanian's billet radio bezel for cut dashes man that looks killer in there! if i was a little closer to in my build i would def grab one of these __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-01-2010, 07:34 PM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Mahanian's billet radio bezel for cut dashes I want one. I am not close in my build, but I want to help get the 20 needed for this run to be made. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-08-2010, 09:00 AM	#4
hvychvydriver Registered User Join Date: Dec 2009 Location: fayetteville, nc Posts: 7	Re: Mahanian's billet radio bezel for cut dashes I would like one also Posted via Mobile Device

09-01-2010, 07:44 PM	#5
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Mahanian's billet radio bezel for cut dashes Im in __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

09-01-2010, 08:24 PM	#6
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Mahanian's billet radio bezel for cut dashes Put me down for two. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-01-2010, 08:48 PM	#7
hybridchevy71 Registered User Join Date: Mar 2009 Location: Anaheim, CA Posts: 177	Re: Mahanian's billet radio bezel for cut dashes quick qestion are these bezels the same as the ones 'mekdad" produced back in 09? hes price was 50 shipped, is he running onother bacth?

09-01-2010, 10:53 PM	#9
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Mahanian's billet radio bezel for cut dashes im in keep us posted

09-02-2010, 06:30 AM	#11
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: Mahanian's billet radio bezel for cut dashes Put me in line for one. Just need to no how to pay? Thanks Randy

09-02-2010, 08:34 AM	#12
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Mahanian's billet radio bezel for cut dashes I'm in for two of them. __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

09-02-2010, 09:24 AM	#13
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Mahanian's billet radio bezel for cut dashes Looks awesome, put me down for one.

09-02-2010, 09:56 AM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Mahanian's billet radio bezel for cut dashes I'm in, put me down for one __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-02-2010, 01:10 PM	#15
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Mahanian's billet radio bezel for cut dashes Ill take one

09-02-2010, 03:40 PM	#16
MrClean I'LL TRY TO FIX IT! Join Date: Oct 2007 Location: Santa Maria, CA Posts: 108	Re: Mahanian's billet radio bezel for cut dashes Put me down for one! __________________ -- Jorge -- 1972 Custom/10 LWB 350 My Build

09-02-2010, 03:58 PM	#17
SWB4x4 Registered User Join Date: Jan 2010 Location: Nor*Cal CALIFORNIA Posts: 157	Re: Mahanian's billet radio bezel for cut dashes I want one for a double din any chance on him making me one? __________________ J.T. 1972 SWB 4X4 on 35"s with 6" lift all around 3/4 ton running gear with high steer and 4.88s 350/th350. SOON TO BE DONE:2" higher in front 37"s,LSX Swap,Hugger Orange & White Paint Scheme,Air Conditioning,Power Windows & Locks,Complete Gauge Kit,Tank Relocation,Double Din Nav with full Audio System. My Build Thread http://67-72chevytrucks.com/vboard/s...=1#post4169140



Register or Log In To remove these advertisements.

09-02-2010, 06:23 PM	#19
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Mahanian's billet radio bezel for cut dashes Does he have a time frame on how long it'll be to machine and ship them from today since he'll be gone for a month? __________________ 1970 2wd Blazer

09-03-2010, 02:23 AM	#22
1967stella Registered User Join Date: Sep 2009 Location: Ashburn, Virginia Posts: 22	Re: Mahanian's billet radio bezel for cut dashes i am deinatly in how much are they total cost and shipping to va and how to pay. i have been waiting for something like this and this looks amazing __________________ 1967 chevy c10 shortbed 327 "stella" my truck 1984 GMC High Sierra short bed 350 "fluffy" fiance's truck 1984 Chevy Silverado short bed LT1 supercharged "blue" fiance's dads truck

09-03-2010, 05:38 AM	#23
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: Mahanian's billet radio bezel for cut dashes My dash isn't cut...(yet)....but this is making me reconsider....I have an empty spot to fill....looks nice Attached Images __________________ -Ron- Last edited by OldSkool71; 09-03-2010 at 05:40 AM.

09-03-2010, 07:25 PM	#24
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,159	Re: Mahanian's billet radio bezel for cut dashes I have one and its nice...... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time

09-04-2010, 11:33 AM	#25
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Mahanian's billet radio bezel for cut dashes Bump..

Register or Log In To remove these advertisements.