67 GMC midnight money pit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trukzguy · 09-02-2010, 02:02 AM

Finally starting on on my project, the pics are kinda crappy and there is stuff piled in the box and on the hood because I only have a 2 car garage,not much room in there for storage and work. My oldest boy calls the truck Mater,cause its all rusty and stuff,lol. Took the left box side off to cut and section it to make it a short box. Sand blasted some hinges and latches for the tailgate. I will be measuring and cutting the boxside tomorrow.I will post some pics soon.

OARNGESI · 09-02-2010, 03:57 AM

Looks like a descent start besides the swb conversion whats the plans

**thelonerife** · 09-02-2010, 10:12 PM

Good to see another gmc saved

67chevy1series · 09-03-2010, 12:25 AM

hey cool build i will follow along with this one

trukzguy · 09-03-2010, 01:51 AM

Thanks to all for the support.
The plans for the truck are:
convert the lwb to swb
complete wood bed kit
replace any rusted out panels(may be quite a bit to replace)
Power and ft disc conversion
lowering kit(not sure how low)
power steering conversion
do up the 400 sbc
convert to a 700r4 tranny(has 3 in the tree now)
march pulley set up
20 in rims
classic auto air conversion for AC to be moved in the cab
Aluminum 4 core rad and electric fan
one piece door windows
there may be more along the way!!!

trukzguy · 09-04-2010, 12:54 AM

Got somemore work done tonite, cut 20'' out of the box side. 12 in the front and 8 in the rear.

trukzguy · 09-04-2010, 01:10 AM

here are more pics of the boxside and when i got the truck home,and me looking to see what it has for an engine.(400 small bock).
Thats my oldest boy on the trailer, he's so proud.

travlinman · 10-24-2010, 04:30 AM

cant wait to see the progress...
please tell me ur not going to use/want those side mirrors and are willing to sell them to me ?? please.... : )

trukzguy · 10-26-2010, 05:22 PM

I also found a van tilt steering column, I'm pretty stoked that i found all of that.

trukzguy · 10-26-2010, 05:23 PM

Quote:

Originally Posted by travlinman

cant wait to see the progress...
please tell me ur not going to use/want those side mirrors and are willing to sell them to me ?? please.... : )

If you want them make me an offer.

madmopar · 10-25-2010, 11:10 AM

Hey, that looks like a mid 70's speedo in your dash... I just did that this weekend to mine... got 2 sets of numbers now... I'll be watching your build. Looks cool!

trukzguy · 10-26-2010, 05:12 PM

Here are the pics of what i got done, got the front cliptaken off, the front fenders were rotten and damaged beyond repair,I'll have to get new ones.Took the winshield and rear window out, they are in mint shape.Got the steering column out,(anybody need or want a 3 in the tree column and a 3 speed trans).The floor is in pretty bad shape, I'm not sure what i'm going to do,either repair or replace the entire floor.

trukzguy · 10-26-2010, 05:18 PM

I got my hands on a 1986 gmc 1\2 ton to convert the front suspension and brakes to disc and power and power steering.It will also convert from a 6 bolt lug to a 5 bolt.

sourkraut · 10-28-2010, 07:09 AM

looking good!

travlinman · 10-29-2010, 02:08 AM

pm sent

trukzguy · 12-12-2010, 11:26 PM

Not much progress these last couple months, been pretty cold lately, no heat in the garage. Hopefully I can get somdone after christmas. I'm trying to get a new job, so then I would be home every night.Then maybe I can get more work done, if the wife doesn't have to many projects for me to do.

trukzguy · 05-09-2011, 11:24 PM

Got the cab taken off now, I got some new tools for my b-day, got a engine crane and leveler. Took the engine out. Got to take the frame to my brother in laws shop so that we and shorten the frame. Ordered some new suspension parts from Porterbuilt Fabrication. I ordered the stage 2 front and rear kits. Thanks Nate for all your help. Hopefully I can get it all painted and put togethere before winter hits so that i dont freeze my but off.

I will post pics of the frame shortening and suspension install.

dougminton · 05-10-2011, 12:58 PM

I'll follow along. Love the GMC's

trukzguy · 05-11-2011, 12:25 AM

Quote:

Originally Posted by dougminton

I'll follow along. Love the GMC's

thanks, I hope it turns out good as good as I want it to.

STPrider · 05-11-2011, 01:08 AM

subscribed! love this truck and stoked to see how that lwb-swb conversion goes, only heard stories about those!
-Derek

70LonghornCST · 05-11-2011, 01:40 AM

Nice job! Subscribed...

heeroyue2002 · 05-11-2011, 02:47 AM

nice build

trukzguy · 06-16-2011, 11:07 PM

Quote:

Originally Posted by heeroyue2002

nice build

Quote:

Originally Posted by 70LonghornCST

Nice job! Subscribed...

Quote:

Originally Posted by STPrider

subscribed! love this truck and stoked to see how that lwb-swb conversion goes, only heard stories about those!
-Derek

Thanks guy,its all coming together, its just very slow.

trukzguy · 06-17-2011, 12:32 AM

Christmas in June, all my parts from Porterbuilt showed up today. Now all I have to do is clean and paint everytning so that I can install it.

tantrumpipeline · 06-17-2011, 12:58 AM

sweet purchase, next time around I'm going the PB route for sure, super exciting when a parts order that big arrives, the ups guy was laughing at me with my CPP delivery

09-02-2010, 02:02 AM	#1
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	67 GMC midnight money pit Finally starting on on my project, the pics are kinda crappy and there is stuff piled in the box and on the hood because I only have a 2 car garage,not much room in there for storage and work. My oldest boy calls the truck Mater,cause its all rusty and stuff,lol. Took the left box side off to cut and section it to make it a short box. Sand blasted some hinges and latches for the tailgate. I will be measuring and cutting the boxside tomorrow.I will post some pics soon. Attached Images Last edited by trukzguy; 09-02-2010 at 02:15 AM.

09-02-2010, 03:57 AM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: 67 GMC midnight money pit Looks like a descent start besides the swb conversion whats the plans __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

09-02-2010, 10:12 PM	#3
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 67 GMC midnight money pit Good to see another gmc saved __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

09-03-2010, 12:25 AM	#4
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 GMC midnight money pit hey cool build i will follow along with this one

09-03-2010, 01:51 AM	#5
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit Thanks to all for the support. The plans for the truck are: convert the lwb to swb complete wood bed kit replace any rusted out panels(may be quite a bit to replace) Power and ft disc conversion lowering kit(not sure how low) power steering conversion do up the 400 sbc convert to a 700r4 tranny(has 3 in the tree now) march pulley set up 20 in rims classic auto air conversion for AC to be moved in the cab Aluminum 4 core rad and electric fan one piece door windows there may be more along the way!!!

09-04-2010, 12:54 AM	#6
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit Got somemore work done tonite, cut 20'' out of the box side. 12 in the front and 8 in the rear. Attached Images

09-04-2010, 01:10 AM	#7
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit here are more pics of the boxside and when i got the truck home,and me looking to see what it has for an engine.(400 small bock). Thats my oldest boy on the trailer, he's so proud. Attached Images Last edited by trukzguy; 10-23-2010 at 01:11 PM.

10-24-2010, 04:30 AM	#8
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: 67 GMC midnight money pit cant wait to see the progress... please tell me ur not going to use/want those side mirrors and are willing to sell them to me ?? please.... : ) __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

10-26-2010, 05:22 PM	#9
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit I also found a van tilt steering column, I'm pretty stoked that i found all of that. Last edited by trukzguy; 10-26-2010 at 05:25 PM.

10-25-2010, 11:10 AM	#11
madmopar This guy has got to be stopped Join Date: Jul 2010 Location: Frankenstein, MO Posts: 138	Re: 67 GMC midnight money pit Hey, that looks like a mid 70's speedo in your dash... I just did that this weekend to mine... got 2 sets of numbers now... I'll be watching your build. Looks cool! __________________ J P Evers 1970 4x4 LWB project: http://67-72chevytrucks.com/vboard/s...d.php?t=415134

10-26-2010, 05:12 PM	#12
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit Here are the pics of what i got done, got the front cliptaken off, the front fenders were rotten and damaged beyond repair,I'll have to get new ones.Took the winshield and rear window out, they are in mint shape.Got the steering column out,(anybody need or want a 3 in the tree column and a 3 speed trans).The floor is in pretty bad shape, I'm not sure what i'm going to do,either repair or replace the entire floor. Attached Images

10-26-2010, 05:18 PM	#13
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit I got my hands on a 1986 gmc 1\2 ton to convert the front suspension and brakes to disc and power and power steering.It will also convert from a 6 bolt lug to a 5 bolt. Attached Images

10-28-2010, 07:09 AM	#14
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 67 GMC midnight money pit looking good! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-29-2010, 02:08 AM	#15
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: 67 GMC midnight money pit pm sent __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

12-12-2010, 11:26 PM	#16
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit Not much progress these last couple months, been pretty cold lately, no heat in the garage. Hopefully I can get somdone after christmas. I'm trying to get a new job, so then I would be home every night.Then maybe I can get more work done, if the wife doesn't have to many projects for me to do. __________________ Jay Barrhead,Alberta,Canada 1967 GMC 400sb Porterbuilt stage 2 front and rear suspension http://67-72chevytrucks.com/vboard/s...d.php?t=419519



Register or Log In To remove these advertisements.

05-09-2011, 11:24 PM	#17
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight money pit Got the cab taken off now, I got some new tools for my b-day, got a engine crane and leveler. Took the engine out. Got to take the frame to my brother in laws shop so that we and shorten the frame. Ordered some new suspension parts from Porterbuilt Fabrication. I ordered the stage 2 front and rear kits. Thanks Nate for all your help. Hopefully I can get it all painted and put togethere before winter hits so that i dont freeze my but off. I will post pics of the frame shortening and suspension install. __________________ Jay Barrhead,Alberta,Canada 1967 GMC 400sb Porterbuilt stage 2 front and rear suspension http://67-72chevytrucks.com/vboard/s...d.php?t=419519

05-10-2011, 12:58 PM	#18
dougminton Registered User Join Date: Mar 2009 Location: norman okahoma Posts: 269	Re: 67 GMC midnight money pit I'll follow along. Love the GMC's __________________ The TEAL GMC build thread is HERE 1972 GMC SWB 454 oval ports TH400 fastest 1/4 mile time so far 13.05 @ 104 If you think you have too much horsepower you obviously have a traction problem !

05-11-2011, 01:08 AM	#20
STPrider Registered User Join Date: Oct 2009 Location: chilliwack, BC Posts: 136	Re: 67 GMC midnight money pit subscribed! love this truck and stoked to see how that lwb-swb conversion goes, only heard stories about those! -Derek __________________ '71 GMC pickup; "Ashley,"

05-11-2011, 01:40 AM	#21
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 67 GMC midnight money pit Nice job! Subscribed... __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

05-11-2011, 02:47 AM	#22
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 67 GMC midnight money pit nice build __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

06-17-2011, 12:32 AM	#24
trukzguy Registered User Join Date: Apr 2010 Location: Barrhead, Alberta Posts: 68	Re: 67 GMC midnight madness Christmas in June, all my parts from Porterbuilt showed up today. Now all I have to do is clean and paint everytning so that I can install it. Attached Images __________________ Jay Barrhead,Alberta,Canada 1967 GMC 400sb Porterbuilt stage 2 front and rear suspension http://67-72chevytrucks.com/vboard/s...d.php?t=419519

06-17-2011, 12:58 AM	#25
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: 67 GMC midnight money pit sweet purchase, next time around I'm going the PB route for sure, super exciting when a parts order that big arrives, the ups guy was laughing at me with my CPP delivery __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

Register or Log In To remove these advertisements.